Abstract:The use of mechanical drilling in accessing energy resources stored in deep and hard rock formations is becoming increasingly challenging. Thus, laser irradiation has emerged as a novel drilling method with considerable in this context. This study examines the variation of rock fracture length, fracture tortuosity, hole size, and rock breaking efficiency for a different number of holes and laser power, based on the constant total energy of laser irradiation. As indicated by the results, increasing the laser power increases the laser intensity, which helps increase the hole diameter and depth. Moreover, for the same laser power, increasing the number of irradiated holes reduces the laser energy absorbed by each hole, which is not conducive to increasing the hole depth. As the number of holes increases, the mass loss of the also rock increases, while both specific energy (SE) and modified specific energy (MSE) decrease. When the number of holes remains the same, the mass of the shale removed by low power is less than that removed by high power, while SE and MSE have an inverse relation with power. Therefore, high laser power and multiple-hole irradiation are more conducive to rock breaking. Besides, the fracture length and fracture tortuosity of the rock irradiated by the low laser power will increase first and then decrease with the increase in the number of holes, and reach the peak value when the irradiation takes place through three holes. When a high-power laser irradiates the rock, the fracture length and tortuosity will increase with the increase in the number of irradiation holes. This is because a rock irradiated by low power dissipates more energy, with the result that the energy absorbed by the sample with four irradiation holes is not enough to break the rock quickly. This study is expected to provide some guidance to break rock for drilling deep reservoirs and hard rock formations using laser irradiation.

Characterizing the laser drilling process of oil shale using laser-induced voltage

Mechanism of the Laser-Induced Voltage Generated in Oil Shale under the Irradiation of a 532 nm Laser

Laser-induced electro-response of oil shale: Principles and applications

Probing the Anisotropy of Shale by the Voltaic Response of Laser-Induced Plasma

The influence of laser irradiation parameters on thermal breaking characteristics of shale

4D in situ synchrotron X-ray tomographic microscopy and laser-based heating study of oil shale pyrolysis

Characterization of crude oil viscosity change under laser irradiation

Effect of laser irradiation on a heavy crude oil sample: Changes in viscosity and implications for oil recovery and transport

Preliminary investigation on the interaction mechanism of rocks and short pulse laser

Ablation Mechanism in Underwater Drilling by an Ultrafast Laser with Pulse Energy below the Water Breakdown Threshold

Using laser scanning confocal microscopy combined with saturated oil experiment to investigate the pseudo in-situ occurrence mechanism of light and heavy components of shale oil in sub-micron scale

Ultrafast ultraviolet laser-induced voltage of air

Influence of Laser Induced Plasma on Material Removal in Micro-Drilling Underwater

Mechanism Analysis of Rock Vitrification by Strip Laser Scanning

Study on High Power Ultraviolet Laser Oil Detection System

Effect of the number of irradiation holes on rock breaking under constant laser energy

Study on laser deep-hole drilling

Estimation of δ and <i>C</i><sub>13</sub> of organic-rich shale from laser ultrasonic technique measurement

Electrically Tunable Laser-Induced Voltage of Coffee

INVESTIGATION ON DEPTH OF HEAT AFFECTED ZONE OF DISCHARGE SPOT BY HIGH REPETITIVE RATE YAG LASER-INDUCED DISCHARGE TEXTURING

Estimation of delta and C-13 of organic-rich shale from laser ultrasonic technique measurement