Effect of Flame Jet-Induced Damage on Physical and Mechanical Properties of Granite

Yangchun Wu,Linqi Huang,Huilin Liu,Xibing Li
DOI: https://doi.org/10.1007/s00603-024-04155-3
IF: 6.518
2024-10-17
Rock Mechanics and Rock Engineering
Abstract:Flame jet-assisted mechanical rock breaking technology is an important method to achieve efficient NECMM (non-explosive continuous mechanized mining) in hard rock mines. Therefore, it is very important to understand the physical and mechanical properties of the spalling pit surrounding rock after flame jet. In this paper, thermal spalling tests were first performed on granite blocks using a flame with a power of 13.6 kW. Then, the mechanical behaviors of the specimens at different distances from the flame jet path were measured. The result showed that the V p (P-wave velocity), BTS (Brazilian tensile strength), UCS (uniaxial compression strength), and E (Young's modulus) of granite increased with increasing distance. Meanwhile, the mechanical properties of the specimen at 70 mm were slightly lower than that of the untreated specimen. Therefore, it can be assumed that the damage radius of granite after the flame jet was about 70 mm. In Brazilian test, according to the strain cloud diagram of DIC (digital image correlation) system, the high strain zone expanded from the center to both ends of the specimen, and the strain value gradually increased, eventually forming a through-wall crack along the loading direction. In the uniaxial compression test, AE (acoustic emission) counts within the compacted stage increased obviously as the distance from the specimen to the flame jet path decreased. This phenomenon indicated that the thermal damage of specimens near the center of the spalling pit was more severe, and more microcracks inside the specimens were compacted. The thermal spalling and thermal damage model of the rock under the flame jet was established, which can well explain the changes in mechanical properties of rocks. The fact that thermal damage area of the rock after the flame jet is much larger than thermal spalling area is responsible for the feasibility of flame-assisted mechanical rock breaking. Damage factors based on V p and E can well describe the weakening of the mechanical properties of granite. The results are important for guiding flame jet-assisted mechanical rock breaking in hard rock mines.
geosciences, multidisciplinary,engineering, geological
What problem does this paper attempt to address?