Abstract:As large-scale, high-proportion, and efficient distribution transformers surge into the grids, anti-short circuit capability testing of transformer windings in efficient distribution seems necessary and prominent. To deeply explore the influence of progressively short-circuit shock impulses on the core winding deformation of efficient power transformers, a finite element theoretical model was built by referring to a three-phase three-winding 3D wound core transformer with a model of S20-MRL-400/10-NX2. The distributions of internal equivalent force and total deformation of the 3D wound core transformer along different paths under progressively short-circuit shock impulses varying from 60% to 120% were investigated. Results show that the equivalent stress and total deformation change rate reach their maximum as the short-circuit current increases from 60% to 80%, and the maximum and average variation rate for the equivalent stress reach 177.75% and 177.43%, while the maximum and average variation rate for the total deformation corresponds to 178.30% and 177.45%, respectively. Meanwhile, the maximum equivalent stress and maximum total deformation reach 29.81 MPa and 38.70 μm, respectively, as the applied short-circuit current increased to 120%. In light of the above observations, the optimization and deployment of wireless sensor nodes was suggested. Therefore, a distributed monitoring system was developed for acquiring the vibration status of the windings in a 3D wound core transformer, which is a beneficial supplement to the traditional short-circuit reactance detection methods for an efficient grid access spot-check of distribution transformers.

Transportation Monitoring of Geo-Location, Speed, Vibration, and Shock Acceleration for 110-kV Vehicular Mobile Transformers

Online Damping Monitoring Approach Based on Disturbances of Traction Load and Its Application

A study on monitoring technology for multi-terminal ±500kV VSC-HVDC power transmission system

Field Monitoring and Analysis on Vibration and Noise Characteristics of AC Transformer Caused by ± 660kv Yin‐dong DC System

Strategy for remote condition monitoring of power transformer based on feature extraction of three-dimensional temperature field

Wireless Monitoring And Analysing System Of Dissolved Gases In The Transformer Oil

A vibration based condition monitoring system for power transformers

Distributed Vibration Monitoring System for 10 kV-400 kVA 3D Wound Core Transformer under Progressive Short-Circuit Impulses

Enhanced Prediction of Transformers Vibrations under Complex Operating Conditions

Mitigation of Distribution Transformer Overloading with Rolling-Horizon Optimization of Vehicle-to-Grid Resource

Transformer Monitoring with Electromagnetic Energy Transmission and Wireless Sensing

Design and implement of smart impact recorder for transformers

Life Monitoring and Evaluation Strategy of Traction Transformer on Freight Line

A Vibration Measurement System for Health Monitoring of Power Transformers

A New Condition Assessment Method for Distribution Transformers Based on Operation Data and Record Text Mining Technique

Urban rail track condition monitoring based on in-service vehicle acceleration measurements

Design of Portable Transformer Vibration Monitoring and Fault Diagnosis System

Fault location in high-voltage direct-current grids based on panoramic voltage features and vision transformers

Development of a Platform to Enable Real Time, Non-disruptive Testing and Early Fault Detection of Critical High Voltage Transformers and Switchgears in High Speed-rail

Analysis and Measurement Methods of Transformer Vibration and Noise Characteristics

Design and Implementation of a ZigBee-Based Wireless Vibration Transducer for Power Transformer Condition Monitoring