Highly transparent and stretchable multi-layered capacitive film sensor with flexible dot and micro-pillar array for small pressure sensing
Chung-Yu Chen,Ching-Te Kou,Lung-Hao Hu
DOI: https://doi.org/10.1016/j.sna.2024.115605
IF: 4.291
2024-06-15
Sensors and Actuators A Physical
Abstract:The research aim is to develop multilayered capacitive film pressure sensors with dot and micro-pillar array, having high transparency, sensitivity, and flexibility by utilizing polydimethylsiloxane (PDMS) and the conductive polymer, poly(3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT: PSS)" as the primary components. The results reveal that the transmittance values of the multilayered capacitive film sensors with dot array vary with their thickness, achieving values of 76.39 %, 72.06 %, and 65.39 % at a center wavelength of 550 nm and demonstrating the effective capacitive sensing response in the pressure range of 0–750 kPa. Notably, the micro-pillar array multilayered capacitive film sensor shows high sensitivity of 0.025 kPa −1 in the pressure range of 0–100 kPa and a clear trend of capacitance change around 60 kPa. It achieves the highest sensitivity of 0.05 kPa −1 within the 0–10 kPa pressure range. The stability of the multilayered capacitive film sensor is examined by applying compressive forces of 0.5 N, 1.0 N, and 1.5 N in a suspended state, resulting in a maximum rate of change reaching 104.7 % compared to the initial capacitance value. Additionally, the multilayered capacitive film sensors demonstrate good stability under cyclic pressures of 0.5 N, 1.0 N, and 1.5 N. The novel multilayered capacitive film sensor offers specific promising potentials for various applications in the fields of wearable, medical devices, and human-machine interfaces.
engineering, electrical & electronic,instruments & instrumentation