Abstract:Hydropower has been the leading renewable source and cheapest ways to generate electrical energy in the world. In recent years, there has been a major upsurge in the hydropower development because of the use of pump as turbine (PAT). However, the operational reliability of a PAT is greatly affected by the unsteady flow fields; therefore, it is important to examine the unsteady flow behavior which can be used as a reference to reduce the noise, vibration, and cavitation performance for centrifugal pumps working as turbines. Thus, the objective of this study was to evaluate the unsteady flow fields by analyzing the distribution of the pressure pulsations using both numerical and experimental measurements in a PAT operating in pump mode. Firstly, the three‐dimensional (3D) unsteady flow equations were solved using SST <i>k‐</i>ω turbulence model during the numerical calculations. Secondly, the numerical results of the hydraulic pump performance were validated by the experimental measurements for numerical accuracy. Lastly, pressure transducers are positioned at certain monitoring points to measure the pressure in the PAT investigated. The numerical and experimental results show that the main frequency of the pressure pulsation is equal to the blade frequency, and as it deviates from the design operating condition, the magnitude of pressure pulsation intensifies. Furthermore, the impeller eye marked the lowest pressure coefficients especially at the design condition and makes it highly susceptible to cavitation. High pressure coefficients were obviously seen at the pressure side on the blade surface closer to the trailing edge at all studied operating conditions. Meanwhile, the rotor‐stator interaction generated the highest pressure pulsation distribution at the volute tongue. Thus, modification of the volute tongue is an optimal approach of reducing the pressure pulsation intensity in the volute and pump as a whole.

A preliminary investigation on the operational efficiency of centrifugal pumps operating in single-branch, single-pump systems

Energy Saving Design and Operational Optimization of Centrifugal Pump Network: A Review

An Investigation in Performance of a Variable-Speed-Displacement Pump-Controlled Motor System

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Investigation on the Energy Exchange Characteristics of the Regenerative Flow Pump in an Automobile Fuel System

Performance improvement of the sanitary centrifugal pump through an integrated approach based on response surface methodology, multi-objective optimization and CFD

The Optimization of A Low Specific Speed Pipeline Pump

Computational Fluid Dynamics-Based Pump Redesign to Improve Efficiency and Decrease Unsteady Radial Forces

Automatic optimization of centrifugal pump for energy conservation and efficiency enhancement based on response surface methodology and computational fluid dynamics

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Automatic optimization of centrifugal pump based on adaptive single-objective algorithm and computational fluid dynamics

Fuzzy Pressure Control: A Novel Approach to Optimizing Energy Efficiency in Series-Parallel Pumping Systems

Experimental study of the characteristic curves of 0.5 HP radial pump with constant speed

Optimization-Based Methodology for Selection of Pump-as-Turbine in Water Distribution Networks: Effects of Different Objectives and Machine Operation Limits on Best Efficiency Point

Investigation of the operating process of a high-pressure centrifugal pump with taking into account of improvement the process of fluid flowing in its flowing part

Application of CFD to Improve on Reliability and Efficiency of Centrifugal Pump for Oil and Gas Processing Plant

Optimization Calculation Method for Efficiency of Multistage Split Case Centrifugal Pump

Optimization Research Of Parallel Pump System For Improving Energy Efficiency

Optimization of pump transient energy characteristics based on response surface optimization model and computational fluid dynamics

Analysis of energy losses and head produced by a radial impeller using particle image velocimetry

Hydraulic Performance Optimization of a Submersible Drainage Pump