Abstract:Cu3SbSe4, featuring its earth-abundant, cheap, nontoxic and environmentally friendly constituent elements, can be considered as a promising intermediate temperature thermoelectric (TE) material. Herein, a series of p-type Bi-doped Cu3Sb1−xBixSe4 (x = 0–0.04) samples were fabricated through melting and hot pressing process, and the effects of isovalent Bi-doping on their TE properties were comparatively investigated by experimental and computational methods. TEM analysis indicates that Bi-doped samples consist of Cu3SbSe4 and Cu2−xSe impurity phases, which is in good agreement with the results of XRD, SEM and XPS. For Bi-doped samples, the reduced electrical resistivity (ρ) caused by the optimized carrier concentrations and enhanced Seebeck coefficient derived from the densities of states near the Fermi level give rise to a high power factor of ~ 1000 µWm−1 K−2 at 673 K for the Cu3Sb0.985Bi0.015Se4 sample. Additionally, the multiscale defects of Cu3SbSe4-based materials involving point defects, nanoprecipitates, amorphous phases and grain boundaries can strongly scatter phonons to depress lattice thermal conductivity (κlat), resulting in a low κlat of ~ 0.53 Wm−1 K−1 and thermal conductivity (κtot) of ~ 0.62 Wm−1 K−1 at 673 K for the Cu3Sb0.98Bi0.02Se4 sample. As a consequence, a maximum ZT value ~ 0.95 at 673 K is obtained for the Cu3Sb0.985Bi0.015Se4 sample, which is ~ 1.9 times higher than that of pristine Cu3SbSe4. This work shows that isovalent heavy element doping is an effective strategy to optimize thermoelectric properties of copper-based chalcogenides.

Enhanced light-induced transverse thermoelectric effect in c-axis inclined Ba-doped BiCuSeO thin films

Light Element Doping and Introducing Spin Entropy: an Effective Strategy for Enhancement of Thermoelectric Properties in BiCuSeO.

High sensitivity and fast response self-powered PbSe ultraviolet pulsed photodetectors based on the transverse thermoelectric effect

Enhanced Photothermoelectric Detection in Co:BiCuSeO Crystals with Tunable Seebeck Effect.

Enhanced Thermoelectric and Mechanical Properties of BaO-Doped BiCuSeO δ Ceramics

Enhanced Thermoelectric Performance of La-doped BiCuSeO by Tuning Band Structure

Effect of Ba and Pb Dual Doping on the Thermoelectric Properties of BiCuSeO Ceramics

Efficient preparation of the inclined La1-xCaxMnO3 films with excellent light-induced transverse thermoelectric performance based on MOCVD process

Studies of BiCuSeO Thin Films for Potential Infrared Detector Application

Enhanced Thermoelectric Performance of BiCuSeO Via Dual-Doping in Both Bi and Cu Sites

Boosting Thermoelectric Performance of BiCuSeO by Improving Carrier Mobility Through Light Element Doping and Introducing Nanostructures

Enhanced thermoelectric performance of BiCuSO by Pb doping and Se alloying

Enhanced thermoelectric performance of Ca-doped BiCuSeO in a wide temperature range

Efficient preparation of the inclined La<sub>1-x</sub>Ca<sub>x</sub>MnO<sub>3</sub> films with excellent light-induced transverse thermoelectric performance based on MOCVD process

Enhanced Low Temperature Thermoelectric Performance Of Ag-Doped Bicuseo

Enhanced Thermoelectric Properties of Cu3SbSe4 Compounds by Isovalent Bismuth Doping

Tuning band structure and texture for improved thermoelectric performance in BiSe

Enhanced thermoelectric performance of BiCuSeO through composite structuring with Pb-and La-doped components

High thermoelectric performance of oxyselenides: intrinsically low thermal conductivity of Ca-doped BiCuSeO

Co-doping for Significantly Improved Thermoelectric Figure of Merit in P-Type Bi1-2xMgxPbxCuSeO Oxyselenides

Investigating the temperature-dependent Raman spectroscopy of Se/Bi2Te3 thin films and its enhanced photoresponse for optoelectronic applications