Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Spontaneous formation of a nest-like frame structure in sprayed coatings for superhydrophobic applications

Fabrication of Air-Permeable Superhydrophobic Surfaces with Excellent Non-Wetting Property

Rational fabrication of high-durability superhydrophobic coatings based on the excellent compatibility between nanoparticles and polymers

Fabrication of superhydrophobic surfaces with hierarchical structure and their corrosion resistance and self-cleaning properties

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

A Veil-over-sprout Micro-Nano PMMA/SiO2 Superhydrophobic Coating with Impressive Abrasion, Icing, and Corrosion Resistance

One-step spraying route to construct a bio-inspired, robust, multi-functional and superhydrophobic coatings with corrosion resistance, self-cleaning and anti-icing properties

Excellent mechanical durability of superhydrophobic coating by electrostatic spraying

Durable superhydrophobic surface prepared by designing “micro-eggshell” and “web-like” structures

Sprayable superhydrophobic coating with high mechanical/chemical robustness and anti-corrosion

Facile preparation of durable superhydrophobic coating with microstructure self-repairing function by spraying method

Preparation of SiO2 resin coating with superhydrophobic wettability and anti-icing behavior analysis

Self-Stratifying Coating with Robust and Durable Superhydrophobic Underlayer Constructed by Amphiphilic Janus Nanoparticles

Metallic Hierarchical Structures Uniformly Covered with WC@PDMS Composite Coatings Toward Comprehensively Durable Superhydrophobic Surfaces

Spraying Fabrication of Durable and Transparent Coatings for Anti-Icing Application: Dynamic Water Repellency, Icing Delay, and Ice Adhesion

Preparation of Robust Superhydrophobic Coatings Using Hydrophobic and Tough Micro/Nano Particles

Concrete inspired superhydrophobic nanocomposite coating with high robustness

A Durable Superhydrophobic Surface with Bud-Particle Structure Prepared by One-Step Spray Method

Functional and versatile superhydrophobic coatings via stoichiometric silanization

Fabrication of silicone modified polyurethane matrix superhydrophobic coating with hydroxy-terminated polydimethylsiloxane modified SiO2 nanoparticles

Preparation of Wear-Resistant Superhydrophobic Coatings Based on a Discrete-Phase Adhesive