Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Self-Stratifying Coating with Robust and Durable Superhydrophobic Underlayer Constructed by Amphiphilic Janus Nanoparticles

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Robust Superhydrophobic Bilayer Coating: Long-term Anti-Corrosion and Anti-Fouling Resistance Enabled by POSS Star Cross-Linking and Fluoride-Modified SiO2 Nanoparticles Specific Synergies

Fabrication of Air-Permeable Superhydrophobic Surfaces with Excellent Non-Wetting Property

Self-stratification of amphiphilic Janus particles at coating surfaces

Robust and Applicable Superhydrophobic Coatings with Multi-layer Self-similar Structure and Self-healing Properties

Solid‐Like Slippery Coating with Highly Comprehensive Performance

Preparation of Durable Superhydrophobic Coatings Based on Discrete Adhesives

Superhydrophobic Coating Derived from the Spontaneous Orientation of Janus Particles

Robust superhydrophobic silicone/epoxy functional coating with excellent chemical stability and self-cleaning ability

Durable superhydrophobic surface prepared by designing “micro-eggshell” and “web-like” structures

Spontaneous formation of a nest-like frame structure in sprayed coatings for superhydrophobic applications

A durable superhydrophobic coating based on inherent nano/micro-integrated materials

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Design and Synthesis of Robust Superhydrophobic Coating Based on Epoxy Resin and Polydimethylsiloxane Interpenetrated Polymer Network

A Waterborne Coating System for Preparing Robust, Self‐healing, Superamphiphobic Surfaces

Robust and Eco-Friendly Superhydrophobic Starch Nanohybrid Materials with Engineered Lotus Leaf Mimetic Multiscale Hierarchical Structures

Durable superhydrophobic coating based on inorganic/organic double-network polysiloxane and functionalized nanoparticles

Rational fabrication of high-durability superhydrophobic coatings based on the excellent compatibility between nanoparticles and polymers

Superhydrophobic Coating with Multiscale Structure Based on Crosslinked Silanized Polyacrylate and Nanoparticles

Excellent mechanical durability of superhydrophobic coating by electrostatic spraying