Abstract:Due to the extremely complex and strict service conditions of non-magnetic drill collars, the friction, wear and corrosion will lead to their damage and failure. Therefore, the surface modification technology can be used to substantially improve the surface performance and effectively extend the service life of non-magnetic drill collars. Under this engineering background, the laser cladding technology was employed to fabricate pure Inconel 625 and Inconel 625/WC coatings on the surface of TWZ-2 non-magnetic steel substrate, and the influences of WC content on the microstructure, phase composition, element distribution, microhardness and wear and corrosion resistance of these coatings were analyzed. The experimental results show that the microstructures of pure Inconel 625 and Inconel 625/WC coatings are all composed of planar grain, cellular grain, columnar grain and equiaxed grain successively. The phases of pure Inconel 625 coating are composed of γ-Ni phase and Laves phase. With WC particles mixed into Inconel 625 powder, various carbide phases appear in the composite coatings. The higher the WC content, the more the precipitated carbides formed by the reaction, thus aggravating the segregation of the solid solution strengthening elements. Besides, W and C elements present severe local segregation due to the undissolved WC particles. In terms of the hardening and strengthening effects of WC particles, the microhardness of the coatings gradually increases with the rise of WC content. The wear mechanisms of substrate and coatings are all compound wears, and different wear forms have different priorities. Accordingly, the wear mechanisms would change with the WC content. The higher the WC content, the lower the wear loss of coating, and the better the wear and friction resistance. Moreover, the corrosion resistance of coatings is better than that of substrate. With the increase of WC content, the corrosion resistance of the composite coatings decreases gradually.

Effects of Electromagnetic Field on Microstructure and Properties of Ni‐ Based Coatings Reinforced by WC in‐Situ

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Effect of WC on microstructure, molten pool and properties of Ni based coatings by multi-layer laser cladding

Microstructure and properties of Ni60 alloy coating prepared by electromagnetic compound field assisted laser cladding

Study on the Microstructure and Performance of the Multi-Field Composite-Assisted Laser Cladding of Nickel-Based Tungsten Carbide Coatings

Effect of WC content on microstructure and properties of high-speed laser cladding Ni-based coating

Effect of laser remelting on the organization and properties of WC/Ni-based coatings generated in situ by laser cladding

Microstructure and Wear Behavior of Hard Ni60 and Soft WC-12Co/Ni25 Coatings Prepared by Laser Cladding on W1813N Non-magnetic Stainless Steel

Microstructure and Wear Behavior of Hard Ni60 and Soft WC-12Co/N125 Coatings Prepared by Laser Cladding on W1813N Non-magnetic Stainless Steel

Study on Melting–Precipitation Evolution of WC in Ni/WC-12Co Coating during Laser Cladding and Tribological Properties

Influence of WC ceramic particles on structures and properties of laser cladding Ni50-WC coatings

Investigation on the Ni60-WC composite coatings deposited by extreme-high-speed laser-induction hybrid cladding technology: Forming characteristics, microstructure and wear behaviors

Microstructure and properties of composite coatings by laser cladding Inconel 625 and reinforced WC particles on non-magnetic steel

Microstructure and wear resistance of laser cladding FeNiCrMo-WC composite coating

In Situ Synthesised WC Reinforced Nickel Coating by Laser Cladding

Microstructure and Wear Resistance of Ni-Based WC Coating by Ultra-High Speed Laser Cladding

Microstructure and Wear Resistance of Fe60 Laser Cladding Coating Assisted by Steady Magnetic Field–Mechanical Vibration Coupling Field

Microstructure and Property of Laser Cladding Ni-based Alloy Coating Reinforced by WC Particles

Microstructure and Wear Behaviors of WC-Ni Coatings Fabricated by Laser Cladding under High Frequency Micro-Vibration

Electromagnetic Coupling Field Effect on Microstructure and Wear Behavior of Laser-Clad 304 Stainless Steel

Effect of WC-12Co on the mechanical and wear performance of laser melting deposition nickel-based alloy