Abstract:Steel used in the automotive industry must strike a delicate balance between strength and ductility to maintain the structural integrity of vehicles and achieve intricate designs. Traditional methods of reducing weight by using high-strength low-carbon steels have limitations. As a result, a new dual-phase lightweight steel with an austenite-ferrite structure and the composition Fe-0.52C-11Mn-5.14Al-1Cr was developed. The relationship between the microstructure and mechanical properties of this lightweight steel, which underwent various annealing processes (700°C-1000°C) after cold rolling, was examined using specialized equipment like a universal testing machine, electron microscopy, and X-ray diffractometer. The findings reveal that the cold-rolled test steel (CR) exhibits high tensile strength (1500 MPa) but low elongation at break (3.9%). The performance of the experimental steel post-annealing treatment has shown significant improvement, with the average grain size increasing with higher annealing temperatures. The γ phase generally shows an increasing trend, with finer grains post-annealing, and the distribution of the α phase displays a consistent pattern along γ boundaries. Additionally, a substantial number of annealing twins appear in the matrix. These twin boundaries absorb some dislocations, and slip leads to the movement of twin boundaries, effectively reducing stress concentration from deformation and enhancing the ability of twin boundaries to accommodate plastic strain, creating twin dislocation interaction. The interplay among dislocations, stacking faults, and twins regulates the balance between strength and plasticity. Following treatment at 850°C × 1 min + 500°C × 3 min, the steel displays excellent mechanical properties, including ultimate tensile strength (836 MPa), elongation (53%), and strength-ductility product (43723 MPa·%). This study identifies a specific heat treatment parameter that achieves a harmonious equilibrium between outstanding strength and plasticity (strength-ductility product) within the designed composition.

Microstructural Evolution and High‐Temperature Tensile Properties of 15Cr‐Reduced Activation Ferritic Steel Processed by Hot Powder Forging of Mechanically Alloyed Powders

Mechanical Properties and Microstructure of 9Cr-Ods-clf-1 Steel

Improving Mechanical Properties of a Forged High-Manganese Alloy by Regulating Carbon Content and Carbide Precipitation

Thermo-Mechanical Processing as Method Decreasing Delta-Ferrite and Improving the Impact Toughness of the Novel 12% Cr Steels with Low N and High B Contents

The Effect of the Forging Process on the Microstructure and Mechanical Properties of a New Low-Cost Ti-5Al-1.5Mo-1.8Fe Alloy

Mechanical alloying and direct powder forging of Ni–20Cr–20Fe-0.08C alloy

A Control‐Cooled Hot‐Forged Medium Carbon V‐Microalloyed Steel: Strengthening Breakdown in Conjunction with the Synchrotron X‐Ray Absorption Spectroscopy

Influence of Forging Temperature on the Microstructures and Mechanical Properties of a Multi-Directionally Forged Al–Cu–Li Alloy

Effect of forging sequence and heat treatment on microstructure of high-duty power-plant shaft made of Cr-Mo ultra-high strength steel

Microstructure and Mechanical Properties of Multi-Pass Forged and Annealed 42crmo Steel

Microstructure Evolution and Mechanical Properties of a High Cr Oxide Dispersion-Strengthened Steel through STARS Route Followed by Hot Isostatic Pressing

Microstructure Refinement and Crack Initiation in the Forging Process

Influence of Soaking Time on Microstructural, Machinability, and Mechanical Properties of Al-10Si-0.3Mg Alloy Fabricated by Direct Powder Forging

A Study on Integrating Deformation Induced Ferrite Transformation with Conventional Thermomechanical Controlled Processing at an Industrial Scale and the Associated Challenges

Alloy 625 Forgings: Thermo-Metallurgical Model of Solution-Annealing Treatment

Studies on Hot Deformation Behavior and Dynamic Recrystallization in a High Al Ferritic Low-Density Steel

The influence of annealing temperature on the microstructure and mechanical properties of Fe-0.52C-11Mn-5.14Al-1Cr lightweight Steel

Microstructures and mechanical properties of a modified 9Cr ferritic-martensitic steel in the as-built condition after additive manufacturing

Effect of Cooling and Annealing Conditions on the Microstructure, Mechanical and Superelastic Behavior of a Rotary Forged Ti-18Zr-15Nb (at. %) Bar Stock for Spinal Implants

Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing

Microstructural evolution and mechanical properties of 55NiCrMoV7 hot-work die steel during quenching and tempering treatments