Abstract:Recent research has shown that fuel cells using semiconductor–ionic conductor material (SIM) as electrolytes can achieve good performance due to the enhancement of ionic conductivity, and the Schottky junction is expected to block the electron conduction to further address the shorting circuit issue, but efficient characterization of the blocking electron ability of the Schottky junction is absent. In this work, SnO2-Ce0.8Sm0.2O2−δ(SDC) SIM was applied as an electrolyte membrane to assemble the semiconductor–ionic membrane fuel cell (SIMFC). Although the SnO2-SDC SIM electrolyte possessed certain electron conduction, such a device can also deliver an open circuit voltage above 1 V, and the maximum output power reached 1059 W cm–2 at 550 °C without a shorting circuit problem. The rectifying curve was recorded under an inset gas atmosphere to evaluate the blocking electron ability of the Schottky junction. The UPS and UV–vis characterization revealed that the band energy alignment of the Schottky junction is the underlying reason for eliminating electron conduction in SIMFC, and the blocking electron capability is related to the barrier energy of the Schottky junction, which is determined by the difference between the work function of the metal and the Fermi level of the semiconductor. The characterization of band energy and rectifying curve provides a common methodology for SIMFC.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c01344?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c01344</a>.The elemental mapping of the tested cell from cross-sectional view, swept voltage–current curve of the SDC–SnO2 SIMFC before cell operation, DC polarization curves of different ratio cell pellets, resistance of SnO2–SDC pellets with different SnO2 contents, and Ni-NCAL pellets confirmed the feasibility of the experiment and the accuracy of the conclusion (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c01344/suppl_file/sc0c01344_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Characterizing the Blocking Electron Ability of the Schottky Junction in SnO 2 –SDC Semiconductor–Ionic Membrane Fuel Cells

A new in situ strategy to eliminate partial internal short circuit in Ce0.8Sm0.2O1.9-based solid oxide fuel cells

Study on the key materials for realizing electrolyte-free fuel cell and semiconductor-ionic membrane fuel cell

Impedance Spectroscopy Study of an SDC-based SOFC with High Open Circuit Voltage

Effect of Sdc-Impregnated Lsm Cathodes on the Performance of Anode-Supported Ysz Films for Sofcs

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Electrochemical Properties of a Dual-Ion Semiconductor-Ionic Co0.2Zn0.8O-Sm0.20Ce0.80O2−δ Composite for a High-Performance Low-Temperature Solid Oxide Fuel Cell

Semiconductor-Ionic Nanocomposite La0.1Sr0.9MnO3−δ-Ce0.8Sm0.2O2−δ Functional Layer for High Performance Low Temperature SOFC

A novel electronic current-blocked stable mixed ionic conductor for solid oxide fuel cells

Enhanced Cathode/Electrolyte Interface by a Nano-Modified Barrier Layer for Solid Oxide Fuel Cells

Effect of Electrolyte Surface Microstructure on Interfacial Polarization Resistances of Solid Oxide Fuel Cell Cathodes

Single layer low-temperature SOFC based on Ce0.8Sm0.2O2-δ- La0.25Sr0.75Ti1O3-δ-Ni0.8Co0.15Al0.05LiO2-δ composite material

Improved Performance of a Symmetrical Solid Oxide Fuel Cell by Swapping the Roles of Doped Ceria and La0.6Sr1.4MnO4+δ in the Electrode

Enhancement of the Cathode/electrolyte Interface by a Sintering-Active Barrier Layer for Solid Oxide Fuel Cells

Effect Of Samaria Doped Ceria Impregnation On The Electrochemical Performance Of Strontium Doped Lanthanum Chromium Manganite Anode For Solid Oxide Fuel Cells

Study on SrNb-Oxide Cathode Material for Low-temperature Solid Oxide Fuel Cell

Highly active interfacial sites in SFT‐SnO2 heterojunction electrolyte for enhanced fuel cell performance via engineered energy bands: Envisioned theoretically and experimentally

Ni/NiO Exsolved Perovskite La0.2Sr0.7Ti0.9Ni0.1O3-δ for Semiconductor-Ionic Fuel Cells: Roles of Electrocatalytic Activity and Physical Junctions

LSM–SDC electrodes fabricated with an ion-impregnating process for SOFCs with doped ceria electrolytes

Ionic Conductivity of Impregnated Samaria Doped Ceria for Solid Oxide Fuel Cells

Novel high ionic conductivity electrolyte membrane based on semiconductor La0.65Sr0.3Ce0.05Cr0.5Fe0.5O3-δ for low-temperature solid oxide fuel cells