Abstract:In this work, the pyrolysis behavior of plastic waste—TV plastic shell—was investigated, based on thermogravimetric analysis and using a combination of model-fitting and model-free methods. The possible reaction mechanism and kinetic compensation effects were also examined. Thermogravimetric analysis indicated that the decomposition of plastic waste in a helium atmosphere can be divided into three stages: the minor loss stage (20–300°C), the major loss stage (300–500°C) and the stable loss stage (500–1000°C). The corresponding weight loss at three different heating rates of 15, 25 and 35 K/min were determined to be 2.80–3.02%, 94.45–95.11% and 0.04–0.16%, respectively. The activation energy ( E a ) and correlation coefficient ( R 2 ) profiles revealed that the kinetic parameters calculated using the Friedman and Kissinger–Akahira–Sunose method displayed a similar trend. The values from the Flynn–Wall–Ozawa and Starink methods were comparable, although the former gave higher R 2 values. The E α values gradually decreased from 269.75 kJ/mol to 184.18 kJ/mol as the degree of conversion ( α ) increased from 0.1 to 0.8. Beyond this range, the E α slightly increased to 211.31 kJ/mol. The model-fitting method of Coats–Redfern was used to predict the possible reaction mechanism, for which the first-order model resulted in higher R 2 values than and comparable E α values to those obtained from the Flynn–Wall–Ozawa method. The pre-exponential factors (ln A ) were calculated based on the F1 reaction model and the Flynn–Wall–Ozawa method, and fell in the range 59.34–48.05. The study of the kinetic compensation effect confirmed that a compensation effect existed between E a and ln A during the plastic waste pyrolysis.

Pyrolysis Empirical Modeling of Polyester Glass Fiber Reinforced Plastics Using Sestak-Berggren Model Method

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Investigating Kinetic Behavior and Reaction Mechanism on Autothermal Pyrolysis of Polyethylene Plastic

Pyrolysis Kinetic Study and Reaction Mechanism of Epoxy Glass Fiber Reinforced Plastic by Thermogravimetric Analyzer (TG) and TG–FTIR (Fourier-Transform Infrared) Techniques

A Simplified and Effective Molecular-Level Kinetic Model for Plastic Pyrolysis

Development of a Semiglobal Reaction Mechanism for the Thermal Decomposition of a Polymer Containing Reactive Flame Retardants: Application to Glass-Fiber-Reinforced Polybutylene Terephthalate Blended with Aluminum Diethyl Phosphinate and Melamine Polyphosphate

Simulating Polyethylene Pyrolysis from a Generalized Molecular-Level Kinetic Model

Kinetic Parameter Estimation for Linear Low-Density Polyethylene Gas-Phase Process from Molecular Weight Distribution and Short-Chain Branching Distribution Measurements

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

A Molecular-Level Kinetic Model for the Primary and Secondary Reactions of Polypropylene Pyrolysis

Inverse Modeling of Thermal Decomposition of Flame-Retardant PET Fiber with Model-Free Coupled with Particle Swarm Optimization Algorithm

Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste

Pyrolysis Kinetic Analysis of Molten Bioplastics Based on the Combination of Real-Time Characterization and Guassian Deconvolution: Case Study of Poly(lactic Acid) Materials

Kinetics Study of Polypropylene Pyrolysis by Non-Isothermal Thermogravimetric Analysis

An Investigation towards Coupling Molecular Dynamics with Computational Fluid Dynamics for Modelling Polymer Pyrolysis

Understanding Rapid PET Degradation via Reactive Molecular Dynamics Simulation and Kinetic Modeling

Elucidating multiple-scale reaction behaviors of phenolic resin pyrolysis via TG-FTIR and ReaxFF molecular dynamics simulations

A Numerical Study of Thermal Degradation of Polymers: Surface and In-Depth Absorption

Mechanism of non-charring polymer thermal degradation involving two types of heat flux absorption modes

Study on Thermal Degradation Processes of Polyethylene Terephthalate Microplastics Using the Kinetics and Artificial Neural Networks Models