Abstract:Hole transporting materials (HTMs) play a crucial role in achieving highly efficient and stable perovskite solar cells (PSCs). Spiro-typed materials being the most widely used HTMs are commonly utilized with dopants, such as Li-TFSI, to improve their carrier mobility significantly. However, dopants could affect the morphology of hole transporting layer negatively by forming defects and pinholes which restrict the performance of devices. Here, we adopt the extended π-conjugated structures N-ethylcarbazole and dibenzothiophene to substitute the donor group 4-methoxyphenyl of spiro-OMeTAD, devising two novel HTMs, SC and ST, respectively. Notably, SC possesses low crystallinity and good solubility due to the existence of ethyl in side groups, leading to decent miscibility with Li-TFSI to prevent unfavorable phase-separation. The SC-based device delivers the best power conversion efficiency (PCE) of 21.76% which is higher than that of spiro-OMeTAD (20.73%), attributed to the formation of smooth and pinhole-free morphology. Moreover, it exhibits long-term stability and retains over 90% of initial PCE value for more than 30 days without encapsulation in ambient air. In contrast, the ST-based device suffers from dense pinholes induced by its relatively high crystallinity and poor solubility, resulting in a low PCE of 18.18% and inferior stability. Thus, it is effective to modify the side groups in spiro-typed HTMs with specific structures to obtain predictable properties, fabricating PSCs with high efficiency and stability facilely.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.0c03772?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.0c03772</a>.Synthetic routes of SC and ST; the method of hole mobility measurements; the details of stability test of devices; 1H and 13C NMR and MALDI-TOF spectra of the developed compounds; UPS spectra of perovskite and HTMs; TGA and DSC tests of HTMs; DFT result of spiro-OMeTAD; top view SEM images, AFM images, and cross-sectional SEM images of devices; TOF-SIMS mappings of the distribution of dopants in HTMs; UV–vis spectra of radical cation; the devices performance under various concentrations of HTMs and dopants; contact angle of HTMs in the solid state and the stability tests of devices; decomposition rate of perovskite coated by HTMs; and cost calculations (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c03772/suppl_file/cm0c03772_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Low-Cost Dopant Additive-Free Hole-Transporting Material for a Robust Perovskite Solar Cell with Efficiency Exceeding 21%

Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Cored Hole Transport Material Enabling Over 21% Efficiency Dopant‐Free Perovskite Solar Cells

D-A-π-A-D-type Dopant-free Hole Transport Material for Low-Cost, Efficient, and Stable Perovskite Solar Cells

Dopant‐Free Donor (d)–π–d–π–d Conjugated Hole‐Transport Materials for Efficient and Stable Perovskite Solar Cells

Dopant-free dithieno[3′,2':3,4;2′′,3'':5,6]benzo[1,2-d]imidazole-based hole-transporting materials for efficient perovskite solar cells

Judicious Molecular Design of 5H‐Dithieno[3,2‐b:2′,3′‐d]Pyran‐based Hole‐Transporting Materials for Highly Efficient and Stable Perovskite Solar Cells

Design of Low Crystallinity Spiro-Typed Hole Transporting Material for Planar Perovskite Solar Cells to Achieve 21.76% Efficiency

Efficient Perovskite Solar Cells Enabled by Facile Synthesis of Triphenylamine‐Based Hole‐Transport Material with D–A1–A2 Structure

Dopant‐Free Hole Transport Materials Based on a Large Conjugated Electron‐Deficient Core for Efficient Perovskite Solar Cells

Dopant‐free Pyrene‐based Hole Transporting Material Enables Efficient and Stable Perovskite Solar Cells

Fused Dithienopicenocarbazole Enabling High Mobility Dopant-Free Hole-Transporting Polymers for Efficient and Stable Perovskite Solar Cells

Dopant-free molecular hole transport material that mediates a 20% power conversion efficiency in a perovskite solar cell

Multifunctional Two-Dimensional Conjugated Materials for Dopant-Free Perovskite Solar Cells with Efficiency Exceeding 22%

Efficient Perovskite Solar Cells by Employing Triphenylamine-Functionalized Azadipyrromethene Dyes as Dopant-Free Hole-Transporting Materials and Bidentate Surface Passivating Agents

Improving the Fill Factor of Perovskite Solar Cells by Employing an Amine-tethered Diketopyrrolopyrrole-Based Polymer as the Dopant-free Hole Transport Layer

Highly Efficient and Stable Perovskite Solar Cells Via a Multifunctional Hole Transporting Material

Passivation functionalized phenothiazine-based hole transport material for highly efficient perovskite solar cell with efficiency exceeding 22%

Benzodithiophene‐Thienothiadiazole Copolymers as Dopant‐Free Hole‐Transporting Layers Enabling Efficient and Stable Perovskite Solar Cells

Thieno[3,2 -b]thiophene-based linear dopant-free hole transport materials for efficient perovskite solar cells

Conformational and Compositional Tuning of Phenanthrocarbazole-Based Dopant-Free Hole-Transport Polymers Boosting the Performance of Perovskite Solar Cells

Dopant-Free Hole-Transporting Material Based on Poly(2,7-(9,9-bis(N,N-di-p-methoxylphenylamine)-4-phenyl))-fluorene for High-Performance Air-Processed Inverted Perovskite Solar Cells