Abstract:Replacing the dominated hole transport material (HTM), doped Spiro-OMeTAD, in state-of-the-art perovskite solar cells (PSCs) is a challenge but an urgent issue for commercialization of this technology. Here, a solution-processable two-dimensional (2D) polymer HTM, namely, 2DP-TDB, which featuring with extended π-electron delocalization into the two-dimensions, has been successfully developed. It is found that 2DP-TDB shows multifunctional characteristics, such as dominant face-on packing orientation, good charge transport properties, efficient perovskite surface passivation capability. and hydrophobicity. As a result, planar n-i-p structured PSCs employing 2DP-TDB as dopant-free HTM exhibit a high efficiency of 21.53%, which is much larger than that using a control 2D small molecule (TB-DPP) (11.61%). Importantly, after further optimization of the perovskite film with the formamidine-based spacer, the devices based on dopant-free 2DP-TDB HTM show a champion efficiency as high as 22.17%. This work offers a fundamental strategy by developing 2D conjugated polymer HTMs for dopant-free PSCs with both high efficiency and stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00385?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00385</a>.Materials synthesis, GPC, device characterization and stability measurements, charge mobility, theoretical calculations, TGA curve, adsorption–desorption isotherms, optimized geometries, energy level diagram and CV, water droplet contact angles, film degradation evolution, device stability, photovoltaic performance variations, and FTIR, UV–vis, XRD, TEM, J–V curves, conductivity, XPS, EQE, SEM, AFM, XRD, 1H NMR, 13C NMR, and MALDI-TOF MS data (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00385/suppl_file/nz1c00385_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fused Dithienopicenocarbazole Enabling High Mobility Dopant-Free Hole-Transporting Polymers for Efficient and Stable Perovskite Solar Cells

Benzodithiophene‐Thienothiadiazole Copolymers as Dopant‐Free Hole‐Transporting Layers Enabling Efficient and Stable Perovskite Solar Cells

Conformational and Compositional Tuning of Phenanthrocarbazole-Based Dopant-Free Hole-Transport Polymers Boosting the Performance of Perovskite Solar Cells

Improving the Fill Factor of Perovskite Solar Cells by Employing an Amine-tethered Diketopyrrolopyrrole-Based Polymer as the Dopant-free Hole Transport Layer

π-Conjugated Polymer with Pendant Side Chains as a Dopant-Free Hole Transport Material for High-Performance Perovskite Solar Cells

Dopant‐free Bithiophene Imide‐based Polymeric Hole Transporting Materials for Efficient and Stable Perovskite Solar Cells

Multifunctional Two-Dimensional Conjugated Materials for Dopant-Free Perovskite Solar Cells with Efficiency Exceeding 22%

Thieno[3,2 -b]thiophene-based linear dopant-free hole transport materials for efficient perovskite solar cells

Dopant‐Free, Donor–Acceptor‐Type Polymeric Hole‐Transporting Materials for the Perovskite Solar Cells with Power Conversion Efficiencies over 20%

Rational Design of Dopant‐Free Coplanar D‐π‐D Hole‐Transporting Materials for High‐Performance Perovskite Solar Cells with Fill Factor Exceeding 80%

Dopant‐Free Ternary Conjugated Polymeric Hole‐Transporting Materials for Efficient Inverted Planar Perovskite Solar Cells

Dopant‐Free Polymeric Hole Transport Materials with a DA'D‐A Backbone for Efficient and Stable Inverted Perovskite Solar Cells

Dopant-Free Hole Transport Material Based on Non-Covalent Interaction for Efficient Perovskite Solar Cells

Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Cored Hole Transport Material Enabling Over 21% Efficiency Dopant‐Free Perovskite Solar Cells

A Dual-Functional Conjugated Polymer as an Efficient Hole-Transporting Layer for High-Performance Inverted Perovskite Solar Cells

Dopant‐Free Polymeric Hole Transport Materials with a DA’D–A Backbone for Efficient and Stable Inverted Perovskite Solar Cells

Donor–Acceptor–Donor Type Cyclopenta[2,1-b;3,4-b′]dithiophene Derivatives as a New Class of Hole Transporting Materials for Highly Efficient and Stable Perovskite Solar Cells

D-A-π-A-D-type Dopant-free Hole Transport Material for Low-Cost, Efficient, and Stable Perovskite Solar Cells

Benzo[1,2- c :4,5- c ′]dithiophene-4,8-dione (BDD) Core Building Block Based Dopant-Free Hole-Transport Materials for Efficient and Stable Perovskite Solar Cell

Thiadiazolophenanthroline-Based Hole-Transporter for Durable and Efficient Perovskite Solar Cells: Atomic-Level Insights on Performance Increase

Efficient Perovskite Solar Cells Enabled by Facile Synthesis of Triphenylamine‐Based Hole‐Transport Material with D–A1–A2 Structure