Quantitative assessment of in vitro jets based on three-dimensional color Doppler reconstruction.

Z. Guo,D. Boughner,J. Dietrich,P. Pflugfelder,L. Durand,M. Loew,A. Fenster

DOI: https://doi.org/10.1016/S0301-5629(00)00337-9

2001-02-01

Abstract:

What problem does this paper attempt to address?

Dopant‐Free Donor (d)–π–d–π–d Conjugated Hole‐Transport Materials for Efficient and Stable Perovskite Solar Cells

Fei Zhang,Xicheng Liu,Chenyi Yi,Dongqin Bi,Jingshan Luo,Shirong Wang,Xianggao Li,Yin Xiao,Shaik Mohammed Zakeeruddin,Michael Gratzel

DOI: https://doi.org/10.1002/cssc.201600905

IF: 8.4

2016-01-01

ChemSusChem

Abstract:Three novel hole-transporting materials (HTMs) using the 4-methoxytriphenylamine (MeOTPA) core were designed and synthesized. The energy levels of the HTMs were tuned to match the perovskite energy levels by introducing symmetrical electron-donating groups linked with olefinic bonds as the bridge. The methylammonium lead triiodide (MAPbI(3)) perovskite solar cells based on the new HTM Z34 (see main text for structure) exhibited a remarkable overall power conversion efficiency (PCE) of 16.1% without any dopants or additives, which is comparable to 16.7% obtained by a p-doped 2,2,7,7-tetrakis-(N,N-di-4-methoxyphenylamino)-9,9-spirobifluorene (spiro-OMeTAD)-based device fabricated under the same conditions. Importantly, the devices based on the three new HTMs show relatively improved stability compared to devices based on spiro-OMeTAD when aged under ambient air containing 30% relative humidity in the dark.
Efficient Perovskite Solar Cells Enabled by Facile Synthesis of Triphenylamine‐Based Hole‐Transport Material with D–A1–A2 Structure

Huiru Li,Jingsheng Wang,Jian Wang,Chaojun Sun,Yuanyuan Xu,Youtian Tao,Zhengyi Sun

DOI: https://doi.org/10.1002/ente.202400609

IF: 4.149

2024-06-12

Energy Technology

Abstract:A dopant‐free small‐molecule hole‐transport material (HTM) based on D–A1–A2‐conjugated structure is employed in perovskite solar cells and achieves a power conversion efficiency of 17.8%, comparable to the performance of inorganic HTM NiOx. The densely packed π‐conjugated structure facilitates the formation of a dense and hydrophobic film, effectively preventing water intrusion and enabling the device to maintain over 95% of its initial efficiency after 60 d. In perovskite solar cells (PSCs), the selection of the hole‐transport material (HTM) markedly influences both the achievement of high efficiency and overall stability. This study outlines the synthesis of a dopant‐free HTM founded on the donor–acceptor1–acceptor2 (D–A1–A2)‐conjugated structure and its integration into PSCs. The ensuing PSCs showcase a power conversion efficiency of 17.8%, comparable to NiOx inorganic HTM‐based devices and surpassing poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate polymeric HTM‐based devices. The efficiency comparable to NiOx is attributed to the efficient hole extraction and transport facilitated by the conjugated π junctions in the specifically designed structure. Furthermore, these devices exhibit enhanced stability, maintaining 95% of their initial performance for 60 d in an N2 atmosphere without encapsulation. The improved stability primarily arises from the hydrophobic nature of the HTM. The larger π‐conjugated molecules lead to a denser film by reducing intermolecular space, effectively retarding water intrusion and providing superior protection to the perovskite layer. Thus, the dopant‐free D–A1–A2 HTM with an extended conjugated π structure not only effectively enhances device efficiency but also substantially improves device stability.

energy & fuels
Benzodithiophene‐Thienothiadiazole Copolymers as Dopant‐Free Hole‐Transporting Layers Enabling Efficient and Stable Perovskite Solar Cells

Yating Feng,Qi Wang,Ting Li,Yu Hua,Zhenyu Wang,Wuke Qiu,Liyang Yu,Yihui Wu,Qiang Peng

DOI: https://doi.org/10.1002/solr.202300706

IF: 9.1726

2023-10-26

Solar RRL

Abstract:The exploration of dopant‐free hole‐transporting materials (HTM) with excellent optoelectronic properties and defect passivation ability is of great significance for simultaneously improving the efficiency and stability of perovskite solar cells (PSCs). Herein, two donor–acceptor (D–A) type conjugated polymers PTTDZ‐F and PTTDZ‐Cl with alternating benzodithiophene (BDT) and thienothiadiazole (TTD) units are successfully developed with desirable hole mobilities and conductivities. The formation of non‐covalent interaction (S···N) between thiophene bridge and TTD units significantly improved the co‐planarity of the molecular backbone and promoted the intramolecular charge‐transfer from BDT to TTD. The hydrophobicity and energy levels of the polymers are finely regulated via introducing different halogen atoms on the BDT moiety. Moreover, the functional groups in polymers efficiently passivate the surface charged traps in perovskite. As a result, champion power conversion efficiencies of 21.50% and 22.20% along with negligible hysteresis have been achieved for devices based on dopant‐free PTTDZ‐F and PTTDZ‐Cl, respectively. The unencapsulated devices also demonstrate excellent long‐term operational stability. Over 93% of their initial efficiencies can be retained after 320 h of maximum output power point tracking under 1 sun illumination (white light LED array). This study paves a new avenue for developing highly stable and efficient HTMs for PSCs. This article is protected by copyright. All rights reserved.

energy & fuels,materials science, multidisciplinary
Dopant-free dithieno[3′,2':3,4;2′′,3'':5,6]benzo[1,2-d]imidazole-based hole-transporting materials for efficient perovskite solar cells

Qingliang Zeng,Yang Li,Hao Tang,Yajie Fu,Chaoqiang Liao,Lingyun Wang,Guichuan Xing,Derong Cao

DOI: https://doi.org/10.1016/j.dyepig.2021.109241

IF: 5.122

2021-04-01

Dyes and Pigments

Abstract:Three dopant-free hole-transporting materials (HTMs) M1−3 containing dithieno[3′,2':3,4;2″,3'':5,6]benzo[1,2-d]imidazole (DTBI) or phenanthro[9,10-d]imidazole (PTI) were designed, synthesized and applied in perovskite solar cells (PSCs), where DTBI and PTI were first introduced as a core structure in the HTMs. Different steric groups (4-methoxybenzene and 4,4′-dimethoxytriphenylamine) were introduced as the periphery groups connected at carbon-2 (C-2) position of imidazole moiety. Accordingly, the relationship between chemical structure and function was systematically investigated with respect to the fused cores and periphery groups, by the measurements of the energy levels, hole mobility, film-forming morphology, extraction and transfer of photo-generated holes, and photovoltaic performances. It was found that M1−2 with DTBI as a core structure exhibited suitable energy levels, higher hole mobility and uniform film-forming morphology, as well as efficient extraction and transfer of photo-generated holes at the perovskite/HTM interfaces. The PSCs using M2 as dopant-free HTM exhibited an impressive power conversion efficiency (PCE) of 16.9% with a negligible hysteresis, surpassing that of the doped spiro-OMeTAD-based standard device (16.4%) under the same testing conditions. Importantly, the unencapsulated PSCs based on dopant-free M2 presented much higher stability than that of doped spiro-OMeTAD. This work provides a promising strategy to construct dopant-free HTMs with both high efficiency and high stability by using DTBI as a core structure.

engineering, chemical,chemistry, applied,materials science, textiles
Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Cored Hole Transport Material Enabling Over 21% Efficiency Dopant‐Free Perovskite Solar Cells

Xinxing Yin,Jie Zhou,Zhaoning Song,Zihao Dong,Qinye Bao,Niraj Shrestha,Sandip Singh Bista,Randy J. Ellingson,Yanfa Yan,Weihua Tang

DOI: https://doi.org/10.1002/adfm.201904300

IF: 19

2019-07-15

Advanced Functional Materials

Abstract:Dopant‐free hole transport materials (HTMs) are essential for commercialization of perovskite solar cells (PSCs). However, power conversion efficiencies (PCEs) of the state‐of‐the‐art PSCs with small molecule dopant‐free HTMs are below 20%. Herein, a simple dithieno[3,2‐b:2′,3′‐d]pyrrol‐cored small molecule, DTP‐C6Th, is reported as a promising dopant‐free HTM. Compared with commonly used spiro‐OMeTAD, DTP‐C6Th exhibits a similar energy level, a better hole mobility of 4.18 × 10−4 cm2 V−1 s−1, and more efficient hole extraction, enabling efficient and stable PSCs with a dopant‐free HTM. With the addition of an ultrathin poly(methyl methacrylate) passivation layer and properly tuning the composition of the perovskite absorber layer, a champion PCE of 21.04% is achieved, which is the highest value for small molecule dopant‐free HTM based PSCs to date. Additionally, PSCs using the DTP‐C6Th HTM exhibit significantly improved long‐term stability compared with the conventional cells with the metal additive doped spiro‐OMeTAD HTM. Therefore, this work provides a new candidate and effective device engineering strategy for achieving high PCEs with dopant‐free HTMs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Dopant‐Free Phthalocyanine Hole Conductor with Thermal‐Induced Holistic Passivation for Stable Perovskite Solar Cells with 23% Efficiency

Geping Qu,Lei Dong,Ying Qiao,Danish Khan,Qian Chen,Pengfei Xie,Xuemeng Yu,Xiaoyuan Liu,Yanggang Wang,Jiangzhao Chen,Xihan Chen,Zong‐Xiang Xu

DOI: https://doi.org/10.1002/adfm.202206585

IF: 19

2022-10-12

Advanced Functional Materials

Abstract:Methylthiotriphenylamine‐substituted copper phthalocyanine (SMe‐TPA‐CuPc) is synthesized and used as dopant‐free HTM for perovskite solar cells. Owing to the strong interaction between the ‐SMe and undercoordinated lead, SMe‐TPA‐CuPc molecules could diffuse into the perovskite film after thermal annealing and effectively passivate the defects in the bulk and at the interface, which led to high efficiency and thermally stable devices. Simultaneous passivation of the defects at the surface and grain boundaries of perovskite films is crucial to achieve efficient and stable perovskite solar cells (PSCs). It is highly desirable to accomplish the above passivation through rational engineering of hole transport materials (HTMs) in combination with appropriate procedure optimization. Here, methylthiotriphenylamine‐substituted copper phthalocyanine (SMe‐TPA‐CuPc) is reported as a dopant‐free HTM for PSCs, exhibiting excellent efficiency, and stability. After thermal annealing, SMe‐TPA‐CuPc molecules diffused into the bulk of the perovskite film and effectively passivated the defects in the bulk and at the interface of the perovskite, owing to the strong interaction between the methylthio moiety and undercoordinated lead. The best‐performing annealed SMe‐TPA‐CuPc‐based device shows efficiency of 21.51%, which is higher than the unannealed SMe‐TPA‐CuPc‐based device (power‐conversion efficiency (PCE) of 20.75%) and reference doped spiro‐OMeTAD‐based device (PCE of 20.61%). Further modification of the perovskite of the annealed SMe‐TPA‐CuPc‐based device by the QAPyBF4 additive result in even higher efficiency of 23.0%. It also shows excellent stability, maintaining 96% of its initial efficiency after 3624 h aging at 85 °C. This work highlights the great potential of phthalocyanine‐based dopant‐free HTMs and the defect passivation by thermal‐induced molecular diffusion strategy for developing highly efficient and stable PSCs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Triarylamine-Functionalized Imidazolyl-Capped Bithiophene Hole Transporting Material for Cost-Effective Perovskite Solar Cells

Vellaichamy Joseph,Jianxing Xia,Albertus Adrian Sutanto,Vygintas Jankauskas,Cristina Momblona,Bin Ding,Kasparas Rakstys,Rajendiran Balasaravanan,Chun-Huang Pan,Jen-Shyang Ni,Shueh-Lin Yau,Muhammad Sohail,Ming-Chou Chen,Paul J. Dyson,Mohammad Khaja Nazeeruddin

DOI: https://doi.org/10.1021/acsami.2c00841

IF: 9.5

2022-05-05

ACS Applied Materials & Interfaces

Abstract:Triarylamine end-capped-functionalized arylene-imidazole derivatives were synthesized from readily accessible, inexpensive precursors and employed as hole transporting materials (HTMs) in perovskite solar cells (PSCs). All the HTMs displayed high thermal decomposition temperatures (>410 °C), which is beneficial for realizing stable PSC devices. In addition, the new HTMs show appropriate energy level alignment with the perovskite layer, ensuring efficient hole transfer from perovskites to HTMs. Interestingly, PSCs fabricated with the triarylamine-functionalized imidazolyl-capped bithiophene molecule (DImBT-4D) as the HTM exhibited the best power conversion efficiency of 20.11%, comparable to that of the benchmark HTM spiro-OMeTAD, prompting it be a prospective candidate for large-scale PSC applications.

materials science, multidisciplinary,nanoscience & nanotechnology
Molecular Engineering Using an Anthanthrone Dye for Low‐Cost Hole Transport Materials: A Strategy for Dopant‐Free, High‐Efficiency, and Stable Perovskite Solar Cells

Hong Duc Pham,Thu Trang,Jinhyun Kim,Cecile Charbonneau,Sergei Manzhos,Krishna Feron,Chung Tsoi,James R. Durrant,Sagar M. Jain,Prashant Sonar,Thu Trang Do,Wing Chung Tsoi

DOI: https://doi.org/10.1002/aenm.201703007

IF: 27.8

2018-02-19

Advanced Energy Materials

Abstract:Abstract In this report, highly efficient and humidity‐resistant perovskite solar cells (PSCs) using two new small molecule hole transporting materials (HTM) made from a cost‐effective precursor anthanthrone (ANT) dye, namely, 4,10‐bis(1,2‐dihydroacenaphthylen‐5‐yl)‐6,12‐bis(octyloxy)‐6,12‐dihydronaphtho[7,8,1,2,3‐ nopqr ]tetraphene (ACE‐ANT‐ACE) and 4,4′‐(6,12‐bis(octyloxy)‐6,12‐dihydronaphtho[7,8,1,2,3‐ nopqr ]tetraphene‐4,10‐diyl)bis( N , N ‐bis(4‐methoxyphenyl)aniline) (TPA‐ANT‐TPA) are presented. The newly developed HTMs are systematically compared with the conventional 2,2′,7,7′‐tetrakis( N , N ′‐di‐ p ‐methoxyphenylamino)‐9,9′‐spirbiuorene (Spiro‐OMeTAD). ACE‐ANT‐ACE and TPA‐ANT‐TPA are used as a dopant‐free HTM in mesoscopic TiO 2 /CH 3 NH 3 PbI 3 /HTM solid‐state PSCs, and the performance as well as stability are compared with Spiro‐OMeTAD‐based PSCs. After extensive optimization of the metal oxide scaffold and device processing conditions, dopant‐free novel TPA‐ANT‐TPA HTM‐based PSC devices achieve a maximum power conversion efficiency (PCE) of 17.5% with negligible hysteresis. An impressive current of 21 mA cm −2 is also confirmed from photocurrent density with a higher fill factor of 0.79. The obtained PCE of 17.5% utilizing TPA‐ANT‐TPA is higher performance than the devices prepared using doped Spiro‐OMeTAD (16.8%) as hole transport layer at 1 sun condition. It is found that doping of LiTFSI salt increases hygroscopic characteristics in Spiro‐OMeTAD; this leads to the fast degradation of solar cells. While, solar cells prepared using undoped TPA‐ANT‐TPA show dewetting and improved stability. Additionally, the new HTMs form a fully homogeneous and completely covering thin film on the surface of the active light absorbing perovskite layers that acts as a protective coating for underlying perovskite films. This breakthrough paves the way for development of new inexpensive, more stable, and highly efficient ANT core based lower cost HTMs for cost‐effective, conventional, and printable PSCs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Dopant-Free Hole Transporting Material Based on Nonconjugated Adamantane for High-Performance Perovskite Solar Cells

Dongyu Fan,Ren Zhang,Yuheng Li,Chengwei Shan,Wenhui Li,Yunhao Wang,Feiyang Xu,Hua Fan,Zonghao Sun,Xuehui Li,Mengshuai Zhao,Aung Ko Ko Kyaw,Gongqiang Li,Jianpu Wang,Wei Huang

DOI: https://doi.org/10.3389/fchem.2021.746365

IF: 5.5

2021-10-25

Frontiers in Chemistry

Abstract:A new dopant-free hole transporting material (HTM) 4′,4′′′,4′′′'',4′′′''''-(adamantane-1,3,5,7-tetrayl)tetrakis(N,N-bis(4-methoxyphenyl)-[1,1′-biphenyl]-4-amine) (Ad-Ph-OMeTAD) (named FDY for short), which consists of a nonconjugated 3D bulky caged adamantane (Ad) as the core, triphenyl amines as side arms, and phenyl units as a linking bridge, is synthesized and applied in an inverted planar perovskite solar cell (PSC). As a result, the champion device with FDY as HTM yields an impressive power of conversion efficiency (PCE) of 18.69%, with J SC = 22.42 mA cm −2 , V OC = 1.05 V, and FF = 79.31% under standard AM 1.5G illumination, which is ca. 20% higher than that of the device based on PEDOT:PSS (only 15.41%). Notably, the stability of PSC based on FDY is much better than that of devices based on PEDOT:PSS, and the corresponding devices retain over 90% of their initial PCEs after storing for 60 days in a nitrogen glove box without any encapsulation. Even when stored in an open air condition with 50–60% relative humidity for 188 h, the retained PCE is still over 81% of its initial one. All these results demonstrate that the new design strategy by combing the bulky and nonconjugated (aliphatic) adamantane unit as the core and triphenyl amines as side arms can efficiently develop highly efficient HTMs for PSCs, which is different from the traditional way based on conjugated backbones, and it may open a new way for scientists to design small-molecule HTMs for PSCs.

chemistry, multidisciplinary
Sulfonated Dopant‐Free Hole‐Transport Material Promotes Interfacial Charge Transfer Dynamics for Highly Stable Perovskite Solar Cells

Rui Li,Maning Liu,Sri Kasi Matta,Arto Hiltunen,Zhifeng Deng,Cheng Wang,Zhicheng Dai,Salvy P. Russo,Paola Vivo,Haichang Zhang

DOI: https://doi.org/10.1002/adsu.202100244

IF: 6.737

2021-09-12

Advanced Sustainable Systems

Abstract:The integration of a functional group into dopant-free hole-transport materials (HTMs) to modify the perovskite|HTM interface has become a promising strategy for high-performance and stable perovskite solar cells (PSCs). In this work, a sulfonated phenothiazine-based HTM is reported, namely TAS, which consists of a butterfly structure with a readily synthesized N,N-bis[4-(methylthio)phenyl]aniline side functional group. The interaction between TAS and perovskite via Pb–S bond induces a dipole moment that deepens the valence band of perovskite and thereby leads to enhanced open-circuit voltage in corresponding n-i-p PSCs. More importantly, the functionalization of perovskite surface via Pb–S bond promotes the hole extraction reaction while suppressing the interfacial non-radiative recombination, contributing to a 20–50% performance improvement compared to less- (4-(methylthio)-N-[4-(methylthio)phenyl]aniline, DAS) or non-interacting (N,N-bis(4-methoxyphenyl)aniline, TAO) counterparts. Consequently, TAS-based PSCs exhibit superior device stability with a high PCE retention (>90% of the initial value) after 125 days of storage in the air.

materials science, multidisciplinary,green & sustainable science & technology
Rational Design of Dipolar Chromophore as an Efficient Dopant-Free Hole-Transporting Material for Perovskite Solar Cells

Zhong’an Li,Zonglong Zhu,Chu-Chen Chueh,Sae Byeok Jo,Jingdong Luo,Sei-Hum Jang,Alex K.-Y. Jen

DOI: https://doi.org/10.1021/jacs.6b06291

IF: 15

2016-08-31

Journal of the American Chemical Society

Abstract:In this paper, an electron donor-acceptor (D-A) substituted dipolar chromophore (BTPA-TCNE) is developed to serve as an efficient dopant-free hole-transporting material (HTM) for perovskite solar cells (PVSCs). BTPA-TCNE is synthesized via a simple reaction between a triphenylamine-based Michler's base and tetracyanoethylene. This chromophore possesses a zwitterionic resonance structure in the ground state, as evidenced by X-ray crystallography and transient absorption spectroscopies. Moreover, BTPA-TCNE shows an antiparallel molecular packing (i.e., centrosymmetric dimers) in its crystalline state, which cancels out its overall molecular dipole moment to facilitate charge transport. As a result, BTPA-TCNE can be employed as an effective dopant-free HTM to realize an efficient (PCE ≈ 17.0%) PVSC in the conventional n-i-p configuration, outperforming the control device with doped spiro-OMeTAD HTM.

chemistry, multidisciplinary
Multifunctional Two-Dimensional Conjugated Materials for Dopant-Free Perovskite Solar Cells with Efficiency Exceeding 22%

Qiang Fu,Zhiyuan Xu,Xingchen Tang,Tingting Liu,Xiyue Dong,Xiaodan Zhang,Nan Zheng,Zengqi Xie,Yongsheng Liu

DOI: https://doi.org/10.1021/acsenergylett.1c00385

IF: 22

2021-03-26

ACS Energy Letters

Abstract:Replacing the dominated hole transport material (HTM), doped Spiro-OMeTAD, in state-of-the-art perovskite solar cells (PSCs) is a challenge but an urgent issue for commercialization of this technology. Here, a solution-processable two-dimensional (2D) polymer HTM, namely, 2DP-TDB, which featuring with extended π-electron delocalization into the two-dimensions, has been successfully developed. It is found that 2DP-TDB shows multifunctional characteristics, such as dominant face-on packing orientation, good charge transport properties, efficient perovskite surface passivation capability. and hydrophobicity. As a result, planar n-i-p structured PSCs employing 2DP-TDB as dopant-free HTM exhibit a high efficiency of 21.53%, which is much larger than that using a control 2D small molecule (TB-DPP) (11.61%). Importantly, after further optimization of the perovskite film with the formamidine-based spacer, the devices based on dopant-free 2DP-TDB HTM show a champion efficiency as high as 22.17%. This work offers a fundamental strategy by developing 2D conjugated polymer HTMs for dopant-free PSCs with both high efficiency and stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00385?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00385</a>.Materials synthesis, GPC, device characterization and stability measurements, charge mobility, theoretical calculations, TGA curve, adsorption–desorption isotherms, optimized geometries, energy level diagram and CV, water droplet contact angles, film degradation evolution, device stability, photovoltaic performance variations, and FTIR, UV–vis, XRD, TEM, J–V curves, conductivity, XPS, EQE, SEM, AFM, XRD, 1H NMR, 13C NMR, and MALDI-TOF MS data (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00385/suppl_file/nz1c00385_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Defect Passivation by a D–A–D Type Hole-Transporting Interfacial Layer for Efficient and Stable Perovskite Solar Cells

Yu-Duan Wang,Yang Wang,Jiang-Yang Shao,Yangjie Lan,Zhong-Rui Lan,Yu-Wu Zhong,Yanlin Song

DOI: https://doi.org/10.1021/acsenergylett.1c00531

IF: 22

2021-05-06

ACS Energy Letters

Abstract:In this work, we present a series of donor–acceptor–donor type of small molecules (BDAD, ODAD, and DDAD) based on the triphenylamine (TPA) and dithienopyrrolobenzothiadiazole (DTPBT) units, which are distinguished by alkyl chains of different lengths grafted on the DTPBT unit, as a hole-transporting interfacial layer for perovskite solar cells (PSCs). The incorporation of the DTPBT units is beneficial for not only carrier transportation but also potential defects passivation via Pb–N/S interactions. A champion power conversion efficiency (PCE) of 22.76% has been achieved on PSCs based on BDAD with the n-butyl side chains. Those devices without encapsulation retain over 96% of their initial PCE for more than 120 days. The improved stability is attributed to the restraint of the generation of δ-phase perovskite as supported by the grazing incidence wide-angle X-ray scattering analyses.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00531?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00531</a>.Synthesis details and DFT-optimized structures, device fabrication, TRPL data, hole mobility, cross-section SEM, J–V of different concentrations of BDAD in PSCs, XPS of N 1s and S 2p, XRD of aging film, and one-dimensional extracted profiles of GIWAXS (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00531/suppl_file/nz1c00531_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Judicious Molecular Design of 5H‐Dithieno[3,2‐b:2′,3′‐d]Pyran‐based Hole‐Transporting Materials for Highly Efficient and Stable Perovskite Solar Cells

Kun‐Mu Lee,Chia‐Hui Lin,Chia‐Chi Chang,Ting‐Yu Yang,Wei‐Hao Chiu,Wei‐Chen Chu,Ya‐Ho Chang,Sie‐Rong Li,Shih‐I Lu,Hsiao‐Chi Hsieh,Kang‐Ling Liau,Chia Hui Hu,Chih‐Hung Chen,Yun‐Shuo Liu,Wei‐Chun Chou,Mandy M. Lee,Shih‐Sheng Sun,Yu‐Tai Tao,Yan‐Duo Lin

DOI: https://doi.org/10.1002/advs.202410666

IF: 15.1

2024-11-30

Advanced Science

Abstract:A series of dithienopyran (DTP)‐based HTMs are reported by substituting different functional groups, which are applied for high‐performance perovskite solar cells (PSCs). The trifluoromethyl‐substituted CF3‐oF exhibits remarkable PCEs in both small‐area (0.09 cm2, 24.13%), and large‐area (1.00 cm2, 22.31%) devices, with good stability owing to its superior hole transport, film formation properties, and hydrophobicity. The structural modification of hole‐transporting materials (HTMs) is an effective strategy for enhancing photovoltaic performance in perovskite solar cells (PSCs). Herein, a series of dithienopyran (DTP)‐based HTMs (Me‐H, Ph‐H, CF3‐H, CF3‐mF, and CF3‐oF) is designed and synthesized by substituting different functional groups on the DTP unit and are used fabricating PSCs. In comparison with Me‐H having two methyl substituents on the dithienopyrano ring, the Ph‐H having two phenyl substituents on the ring exhibits higher PCEs. Notably, the incorporation of trifluoromethyl groups in CF3‐H endows the molecule with a larger dipole moment, deeper HOMO energy level, better film morphology, closer molecular stacking, more efficient defect‐passivation, enhanced hydrophobicity, and better photovoltaic performance when compared with the Ph‐H counterpart. Furthermore, the HTMs of CF3‐mF and CF3‐oF, which feature fluorine‐substituted triphenylamine, demonstrated excellent film‐forming properties, more suitable energy levels, enhanced charge mobility, and improved passivation of the buried interface between HTMs and perovskite. As a result, PSCs employing CF3‐mF and CF3‐oF gave impressive PCEs of 23.41 and 24.13%, respectively. In addition, the large‐area (1.00 cm2) PSCs based on CF3‐oF achieved a PCE of 22.31%. Moreover, the PSCs devices with CF3 series HTMs exhibited excellent long‐term stability under different conditions.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
D-A-π-A-D-type Dopant-free Hole Transport Material for Low-Cost, Efficient, and Stable Perovskite Solar Cells

Tianqi Niu,Weiya Zhu,Yiheng Zhang,Qifan Xue,Xuechen Jiao,Zijie Wang,Yue-Min Xie,Ping Li,Runfeng Chen,Fei Huang,Yuan Li,Hin-Lap Yip,Yong Cao

DOI: https://doi.org/10.1016/j.joule.2020.12.003

IF: 46.048

2021-01-01

Joule

Abstract:The development of low-cost and efficient hole transport materials (HTMs) is important for the commercialization of perovskite solar cells (PSCs). Comparing with the widely studied D-A-D and D-π-D linear-type small molecule HTMs, DTB-FL with a D-A-π-A-D molecular design is proposed, featuring facile synthesis and excellent optoelectronic properties. Moreover, the HTM with efficient surface passivation effects and proper energy level alignment at the hole extraction interface effectively inhibits recombination loss and improves the charge collection property. As a result, the champion efficiencies of 21.5% and 19.6% for active areas of 0.09 and 1.0 cm 2, respectively, with superior operational stability are achieved by using DTB-FL HTM. In addition, DTB-FL can also be used as efficient HTM for all-inorganic PSCs, producing an impressive PCE of 17.0% with a high Voc of 1.30 V. These results underscore the promising potential of the D-A-π-A-D molecular design in preparing low-cost dopant-free HTMs toward stable and efficient PSCs.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Dopant‐Free Ternary Conjugated Polymeric Hole‐Transporting Materials for Efficient Inverted Planar Perovskite Solar Cells

Shanshan Guo,Xiaoye Zhang,Zhanfeng Li,Yong-Mei Chen,Hua Wang,Yuying Hao

DOI: https://doi.org/10.1002/solr.202100506

IF: 9.1726

2021-08-18

Solar RRL

Abstract:In inverted perovskite solar cells (PSCs), hole transport materials (HTMs) can efficiently improve hole extraction and transfer as well as the crystallization of perovskite films, and thus enhance the photovoltaic performance. Herein, we developed two dopant-free, regular A1–D–A2–D-type (D: electron donor, A: electron acceptor) terpolymers, PTPDTBT and PDPPTBT, by integrating the benzothiadiazole unit (A1) with the electron-accepting species of either thieno[3,4-c]pyrrole-4,6-dione or pyrrolo[3,4-c]pyrrole-1,4-dione segment (A2), respectively, where the 2,5-linked thiophene unit (D) resulted in kinked molecular geometry. These A1–D–A2–D-type ternary polymeric HTMs exhibit comparable nonpolar properties but distinct film quality morphology and charge transport characteristics. The terpolymer PDPPTBT with the more insulating side-chain groups is found to improve the quality of perovskite films cast on top with larger grain sizes and more homogeneous crystallization. As a consequence, PSCs based on the ternary-structure PDPPTBT without any dopants and additional interlayers display a champion power-conversion efficiency (PCE) of 18.17%, one of the highest values of MAPbI3-based inverted PSCs using dopant-free D–A-type polymeric HTMs, which is superior to the PTPDTBT-based devices (16.47%). Furthermore, the PDPPTBT-based device exhibit negligible hysteresis (PCE: 18.17% and 17.39% for reverse and forward scans, respectively) and high long-term stability. These results indicate that the terpolymer containing two different electron-deficient units and one electron-rich unit can be an effective HTM to realize high efficiency and stable PSCs, and furthermore the A1–D–A2–D-type regular copolymers are a promising strategy to develop new dopant-free polymeric HTMs for inverted PSCs.This article is protected by copyright. All rights reserved.

energy & fuels,materials science, multidisciplinary
2,3-Diphenylthieno[3,4- b ]pyrazines as Hole-Transporting Materials for Stable, High-Performance Perovskite Solar Cells

Shakil N. Afraj,Ding Zheng,Arulmozhi Velusamy,Weijun Ke,Shelby Cuthriell,Xiaohua Zhang,Yao Chen,Chenjian Lin,Jen-Shyang Ni,Michael R. Wasielewski,Wei Huang,Junsheng Yu,Chun-Huang Pan,Richard D. Schaller,Ming-Chou Chen,Mercouri G. Kanatzidis,Antonio Facchetti,Tobin J. Marks

DOI: https://doi.org/10.1021/acsenergylett.2c00684

IF: 22

2022-05-31

ACS Energy Letters

Abstract:High-performance and durable perovskite solar cells (PSCs) have advanced rapidly, enabled in part by the development of superior interfacial hole-transporting layers (HTLs). Here, a new series of 2,3-diphenylthieno[3,4-b]pyrazine (DPTP)-based small molecules containing bis- and tetrakis-triphenyl amino donors (1–3) was synthesized from simple, low-cost, and readily available starting materials. The matched energy levels, ideal surface topographies, high hole mobilities of 8.57 × 10–4 cm2 V–1 S–1, and stable chemical structures of DPTP-4D (3) make it an effective hole-transporting material, delivering a PCE of 20.18% with high environmental, thermal, and light-soaking stability when compared to the reference HTL materials, doped Spiro-OMeTAD and PTAA in PSC n-i-p planar devices. Overall, these DPTP-based molecules are promising HTM candidates for the fabrication of stable PSCs.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Triphenylamine-functionalized aza-BODIPY dyes: Synthesis, characterization, and their application as hole transport materials in perovskite solar cells

Junjun Su,Li Zhu,Zixuan Dong,Mengqi Liu,Fei Zhang,Xianggao Li,Shirong Wang,Zhijian Chen

DOI: https://doi.org/10.1039/d4qo01616e

IF: 5.456

2024-10-12

Organic Chemistry Frontiers

Abstract:In this study, a series of boron-azadipyrromethene (Aza-BODIPY) dyes 1-3 bearing two or four triphenylamine (TPA) units at 1,7- and/or 3,5-positions of their azadipyrromethene core were synthesized. The structures and properties of these dyes were investigated in detail by X-ray crystallographic analysis, cyclic voltammetry, UV/Vis absorption and emission spectroscopy, TGA, and DFT calculations. All the Aza-BODIPY 1-3 exhibited intensive NIR absorption with wavelength up to 900 nm. Meanwhile, fluorescence with wavelengths up to 1150 nm and quantum yields ranging from 6.5% to 20.9% were observed for these dyes. Moreover, the Aza-BODIPY 1 exhibited an optimal energy alignment with the valence band of perovskite and the highest hole mobility (4.6×10 -4 cm 2 V -1 s -1 ) among the dyes, leading to the best performance of the perovskite solar cells (PSCs) based on 1 with a power conversion efficiency (PCE) of 18.12% as compared with the devices based on 2 and 3. Further IPCE spectra underscored the contribution of the NIR absorption of these dyes to the overall photocurrent of the devices, indicating that introducing multiple electron-donating TPA units into the electron-accepting aza-BODIPY core was an effective strategy for the development of new dopant-free HTMs for PSCs with NIR light harvesting capabilities.

chemistry, organic
In Situ Photogenerated Radicals of Hydroxyl Substituted Pyrene-Based Triphenylamines with Enhanced Transport and Free Doping/Post-Oxidation for Efficient Perovskite Solar Cells

Xiaohui Wang,Zhixin Xie,Rongxin Wang,Ye Xiao,Kai Yan,Yu Zhao,Rui Lin,Carl Redshaw,Yonggang Min,Xinhua Ouyang,Xing Feng

DOI: https://doi.org/10.1002/smll.202311914

IF: 13.3

Small

Abstract:The high-performance hole transporting material (HTM) is one of the most important components for the perovskite solar cells (PSCs) in promoting power conversion efficiency (PCE). However, the low conductivity of HTMs and their additional requirements for doping and post-oxidation greatly limits the device performance. In this work, three novel pyrene-based derivatives containing methoxy-substituted triphenylamines units (PyTPA, PyTPA-OH and PyTPA-2OH) are designed and synthesized, where different numbers of hydroxyl groups are connected at the 2- or 2,7-positions of the pyrene core. These hydroxyl groups at the 2- or 2,7-positions of pyrene play a significantly role to enhance the intermolecular interactions that are able to generate in situ radicals with the assistance of visible light irradiation, resulting in enhanced hole transferring ability, as well as an enhanced conductivity and suppressed recombination. These pyrene-core based HTMs exhibit excellent performance in PSCs, which possess a higher PCE than those control devices using the traditional spiro-OMeTAD as the HTM. The best performance can be found in the devices with PyTPA-2OH. It has an average PCE of 23.44% (PCEmax = 23.50%), which is the highest PCE among the reported PSCs with the pyrene-core based HTMs up to date. This research offers a novel avenue to design a dopant-free HTM by the combination of the pyrene core, methoxy triphenylamines, and hydroxy groups.
Dual‐Strategy Tailoring Molecular Structures of Dopant‐Free Hole Transport Materials for Efficient and Stable Perovskite Solar Cells

Gang Xie,Jing Wang,Shungao Yin,Aihui Liang,Wei Wang,Ziming Chen,Chuizheng Feng,Jianxin Yu,Xunfan Liao,Qifan Xue,Yuang Fu,Yonggang Min,Xinhui Lu,Yiwang Chen

DOI: https://doi.org/10.1002/anie.202403083

2024-03-21

Angewandte Chemie International Edition

Abstract:Dopant-free hole transport materials (HTMs) are ideal materials for highly efficient and stable n-i-p perovskite solar cells (PSCs), but most current design strategies for tailoring the molecular structures of HTMs are limited to single strategy. Herein, four HTMs based on dithienothiophenepyrrole (DTTP) core are devised through dual-strategy methods combining conjugate engineering and side chain engineering. DTTP-ThSO with ester alkyl chain that can form six-membered ring by the S···O noncovalent conformation lock with thiophene in the backbone shows good planarity, high-quality film, matching energy level and high hole mobility, as well as strong defect passivation ability. Consequently, a remarkable power conversion efficiency (PCE) of 23.3% with a nice long-term stability is achieved by dopant-free DTTP-ThSO-based PSCs, representing one of the highest values for un-doped organic HTMs based PSCs. Especially, the fill factor (FF) of 82.3% is the highest value for dopant-free small molecular HTMs-based n-i-p PSCs to date. Moreover, DTTP-ThSO-based devices have achieved an excellent PCE of 20.9% in large-area (1.01 cm2) devices. This work clearly elucidates the structure-performance relationships of HTMs and offers a practical dual-strategy approach to designing dopant-free HTMs for high-performance PSCs.

chemistry, multidisciplinary

Quantitative assessment of in vitro jets based on three-dimensional color Doppler reconstruction.

Dopant‐Free Donor (d)–π–d–π–d Conjugated Hole‐Transport Materials for Efficient and Stable Perovskite Solar Cells

Efficient Perovskite Solar Cells Enabled by Facile Synthesis of Triphenylamine‐Based Hole‐Transport Material with D–A1–A2 Structure

Benzodithiophene‐Thienothiadiazole Copolymers as Dopant‐Free Hole‐Transporting Layers Enabling Efficient and Stable Perovskite Solar Cells

Dopant-free dithieno[3′,2':3,4;2′′,3'':5,6]benzo[1,2-d]imidazole-based hole-transporting materials for efficient perovskite solar cells

Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Cored Hole Transport Material Enabling Over 21% Efficiency Dopant‐Free Perovskite Solar Cells

Dopant‐Free Phthalocyanine Hole Conductor with Thermal‐Induced Holistic Passivation for Stable Perovskite Solar Cells with 23% Efficiency

Triarylamine-Functionalized Imidazolyl-Capped Bithiophene Hole Transporting Material for Cost-Effective Perovskite Solar Cells

Molecular Engineering Using an Anthanthrone Dye for Low‐Cost Hole Transport Materials: A Strategy for Dopant‐Free, High‐Efficiency, and Stable Perovskite Solar Cells

Dopant-Free Hole Transporting Material Based on Nonconjugated Adamantane for High-Performance Perovskite Solar Cells

Sulfonated Dopant‐Free Hole‐Transport Material Promotes Interfacial Charge Transfer Dynamics for Highly Stable Perovskite Solar Cells

Rational Design of Dipolar Chromophore as an Efficient Dopant-Free Hole-Transporting Material for Perovskite Solar Cells

Multifunctional Two-Dimensional Conjugated Materials for Dopant-Free Perovskite Solar Cells with Efficiency Exceeding 22%

Defect Passivation by a D–A–D Type Hole-Transporting Interfacial Layer for Efficient and Stable Perovskite Solar Cells

Judicious Molecular Design of 5H‐Dithieno[3,2‐b:2′,3′‐d]Pyran‐based Hole‐Transporting Materials for Highly Efficient and Stable Perovskite Solar Cells

D-A-π-A-D-type Dopant-free Hole Transport Material for Low-Cost, Efficient, and Stable Perovskite Solar Cells

Dopant‐Free Ternary Conjugated Polymeric Hole‐Transporting Materials for Efficient Inverted Planar Perovskite Solar Cells

2,3-Diphenylthieno[3,4- b ]pyrazines as Hole-Transporting Materials for Stable, High-Performance Perovskite Solar Cells

Triphenylamine-functionalized aza-BODIPY dyes: Synthesis, characterization, and their application as hole transport materials in perovskite solar cells

In Situ Photogenerated Radicals of Hydroxyl Substituted Pyrene-Based Triphenylamines with Enhanced Transport and Free Doping/Post-Oxidation for Efficient Perovskite Solar Cells

Dual‐Strategy Tailoring Molecular Structures of Dopant‐Free Hole Transport Materials for Efficient and Stable Perovskite Solar Cells