Abstract:It is well known that magnetic nanofluids are widely applied in various fields ranging from heat transfer to miniature cooling, and from damping to sealing, due to the mobility and magnetism under magnetic field. Herein, the PFPE-oil based magnetic nanofluids with superior magnetization and dispersion stability were obtained via regulating reaction temperature. The structures of particles were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The size effects of particles on the magnetism and coating effect of particles, and on the stability and saturation magnetization of the fluids were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM) and density instrument, respectively. The results indicate that the impurity phase FeOOH only appear in the sample prepared at 18°C and the average size of Fe 3 O 4 nanoparticles reduces from 120 to 20 nm with raising reaction temperature. The saturation magnetization of Fe 3 O 4 particles increases firstly and then reduces with increasing particle size, which is affected by the thickness of magnetic dead layer and impurity phase FeOOH. The Fe 3 O 4 particles could be chemically coated by PFPE-acids, and the coated mass is a little affected by particle size. The stability of the nanofluids lowers while the saturation magnetization increases firstly and then decrease with increasing particle size. At reaction temperature of 60°C, Fe 3 O 4 particles of 25 nm and the nanofluids with superior stability and saturation magnetization were obtained. Our results indicate that the control of nanoparticles size by regulating reaction temperature can be a useful strategy for preparing magnetic nanofluids with desirable properties for various potential applications.

Fabrication and Dispersion of Fe304 Nanopowder Using Co-Precipitation Method for Magnetic Fluid Preparation

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

In Situ Dispersion of Non-Aqueous Fe3O4 Nanocolloids by Microdroplet Coalescence and Their Use in the Preparation of Magnetic Composite Particles.

Preparation and Dispersion Technique of Magnetic Fluid Materials

1D Magnetic Materials of Fe 3 O 4 and Fe with High Performance of Microwave Absorption Fabricated by Electrospinning Method

Fabrication of Spherical Fe-based Magnetic Powders Via the in Situ De-Wetting of the Liquid–solid Interface

Size Effect of Fe3O4 Nanoparticles on Magnetism and Dispersion Stability of Magnetic Nanofluid

Facile Route to Γ-Fe2o3/sio2 Nanocomposite Used As a Precursor of Magnetic Fluid

Synthesis of Fe<sub>3</sub>O<sub>4</sub> Magnetic Nanoparticles in a Helical Microreactor

Fabrication, characterization, exchange coupling and magnetic behavior of CoFe2O4/CoFe2 nanocomposite nanofibers

Preparation and stability of magnetite ferrite magnetic fluid

Study on preparation and properties of magnetic fluid

Preparation of Nano-Fe3O4/Nylon Composite Fabric with Magnetic Properties by Post Finishing Method

Manipulating Dispersions of Magnetic Nanoparticles

Fabrication of Fluorescent Magnetic Fe3O4@ZnS Nanocomposites.

Highly Dispersed Spinel (mg, Ca, Ba)-ferrite Nanoparticles: Tuning the Particle Size and Magnetic Properties Through a Modified Polyacrylamide Gel Route

Preparation and Surface Modification of Fe<sub>3</sub>O<sub>4 &Lt;/sub>nano-Magnetic Powders

Synthesis of Fe3O4 Nanoparticles by Co-precipitation and Micro-reactor Method

Preparation of superparamagnetic Fe3O4/PMMA nano composites and their magnetorheological characteristics

Synthesis and Rheological Investigation of a Magnetic Fluid Using Olivary Silica-Coated Iron Particles As a Precursor

Facile fabrication of nanocomposite microspheres with polymer cores and magnetic shells by Pickering suspension polymerization