Abstract:Large-capacity medium-temperature latent heat storage (LHS) systems have the potential to be extensively utilized for waste heat recovery and peak load shifting. However, the phase change behavior and mechanism of medium-temperature phase change materials (PCMs) in shell-and-tube LHS systems, as well as the impact of charging and discharging temperatures on the thermal performance, are still unclear. To address these issues and verify the reliability of the cylindrical pilot-scale LHS system, this article designed and constructed a novel cylindrical medium-temperature (up to 300 °C) LHS system with a large capacity (approximately 1 GJ) equipped with spiral and H-shaped fins. The research focused on investigating the impact of various charging and discharging temperatures on the thermal behavior of the LHS system to adapt different temperature scenarios in waste heat recovery while also analyzing the coupling effect of heat conduction and natural convection during charging and discharging and depicting the PCM liquidus based on thermocouple data. The experimental findings indicated that increasing the charging temperature could effectively shorten the charging duration, with a decrease from 5.99 h at 280 °C to 4.00 h at 300 °C, representing a reduction of 33.22%. In contrast, the impact of decreasing the discharging temperature on the discharging duration was less significant than that of increasing the charging temperature. Besides, the differences in heat transfer mechanisms between the charging and discharging processes were analyzed. In the charging process, the heat transfer was initially dominated by heat conduction, followed by natural convection. Conversely, heat conduction predominantly governed the heat transfer process in the discharging process. The heat transfer process dominated by heat conduction would increase the non-uniformity of PCM temperature on the horizontal plane, while the heat transfer process dominated by natural convection would alleviate this non-uniformity. Moreover, the accumulative stored energy under the charging temperature of 290 °C was 952.37 MJ, while the released energy under the discharging temperature of 160 °C was 648.72 MJ, which was approximately 10–200 times greater than those documented in existing studies.

Experimental study on thermal performance of a novel medium-high temperature packed-bed latent heat storage system containing binary nitrate

Evaluation of PCM Thermophysical Properties on a Compressed Air Energy Storage System Integrated with Packed-Bed Latent Thermal Energy Storage

Experimental study on the performance of packed-bed latent thermal energy storage system employing spherical capsules with hollow channels

Charging Behavior of Packed-Bed Thermal Energy Storage Systems in Medium and Low Temperature Applications

Experimental and numerical study of cylindrical encapsulated phase change material in packed bed thermal energy storage with expansion and shrinkage effects

Numerical heat transfer analysis of the packed bed latent heat storage system based on an effective packed bed model

Thermal Performance of the Packed Bed Thermal Energy Storage System with Encapsulated Phase Change Material

Thermal performance analysis and optimization of cascaded packed bed latent heat storage tank

Experimental and numerical study on the performance of a new high-temperature packed-bed thermal energy storage system with macroencapsulation of molten salt phase change material

Thermal Performance Analysis of Packed-Bed Thermal Energy Storage with Radial Gradient Arrangement for Phase Change Materials

Experimental and Modeling Study on Thermal Performance of Hydrated Salt Latent Heat Thermal Energy Storage System

Experimental Study on the Thermal Performance of a High-temperature Finned Latent Heat Storage System

Heat transfer and thermal performance investigation on a visualized latent heat storage system in pilot-scale: Scalable medium-temperature thermal energy storage system

Thermal performance simulations of a packed bed cool thermal energy storage system using n-tetradecane as phase change material

Pore-scale numerical investigation on the thermal storage properties of packed-bed systems with phase change material microcapsules

Numerical Study on the Cyclic Cold Storage Performance in a Solid-Packed Bed Tank

Thermal Performance Investigation of a Novel Medium-Temperature Pilot-Scale Latent Heat Storage System at Different Charging and Discharging Temperatures

Numerical study on stratification performance of cascaded three-layered packed-bed in the thermal storage process

Thermal performance of a novel composite phase change material for solar-assisted air source heat pump packed bed thermal energy storage application

A review on numerical simulation, optimization design and applications of packed-bed latent thermal energy storage system with spherical capsules

Parametric Investigation of Charging and Discharging Performances of a Cascaded Packed Bed Thermal Energy Storage System