Abstract:Large-capacity medium-temperature latent heat storage (LHS) systems have the potential to be extensively utilized for waste heat recovery and peak load shifting. However, the phase change behavior and mechanism of medium-temperature phase change materials (PCMs) in shell-and-tube LHS systems, as well as the impact of charging and discharging temperatures on the thermal performance, are still unclear. To address these issues and verify the reliability of the cylindrical pilot-scale LHS system, this article designed and constructed a novel cylindrical medium-temperature (up to 300 °C) LHS system with a large capacity (approximately 1 GJ) equipped with spiral and H-shaped fins. The research focused on investigating the impact of various charging and discharging temperatures on the thermal behavior of the LHS system to adapt different temperature scenarios in waste heat recovery while also analyzing the coupling effect of heat conduction and natural convection during charging and discharging and depicting the PCM liquidus based on thermocouple data. The experimental findings indicated that increasing the charging temperature could effectively shorten the charging duration, with a decrease from 5.99 h at 280 °C to 4.00 h at 300 °C, representing a reduction of 33.22%. In contrast, the impact of decreasing the discharging temperature on the discharging duration was less significant than that of increasing the charging temperature. Besides, the differences in heat transfer mechanisms between the charging and discharging processes were analyzed. In the charging process, the heat transfer was initially dominated by heat conduction, followed by natural convection. Conversely, heat conduction predominantly governed the heat transfer process in the discharging process. The heat transfer process dominated by heat conduction would increase the non-uniformity of PCM temperature on the horizontal plane, while the heat transfer process dominated by natural convection would alleviate this non-uniformity. Moreover, the accumulative stored energy under the charging temperature of 290 °C was 952.37 MJ, while the released energy under the discharging temperature of 160 °C was 648.72 MJ, which was approximately 10–200 times greater than those documented in existing studies.

Experimental Study on the Thermal Performance of a High-temperature Finned Latent Heat Storage System

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Parametric Study on Melting Process of a Shell-and-tube Latent Thermal Energy Storage under Fluctuating Thermal Conditions

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Numerical Simulation of Thermal Performance and Thermal Stress of Latent Heat Storage System with Various Fins

Performance Evaluation and Analysis of a Vertical Heat Pipe Latent Thermal Energy Storage System with Fins-Copper Foam Combination

Performance Investigation on an Air Source Heat Pump System with Latent Heat Thermal Energy Storage

Experimental Study on a Pilot-Scale Medium-Temperature Latent Heat Storage System with Various Fins

An experimental study on the effect of annular and radial fins on thermal performance of a latent heat thermal energy storage unit

Numerical study on solidification behavior and exergy analysis of a latent heat storage unit with innovative circular superimposed longitudinal fins

Experimental and numerical investigation of the melting behavior of a phase change material in a horizontal latent heat accumulator with longitudinal and annular fins

Experimental and Modeling Study on Thermal Performance of Hydrated Salt Latent Heat Thermal Energy Storage System

Partial cycle operation of latent heat storage with finned tubes

Heat transfer and thermal performance investigation on a visualized latent heat storage system in pilot-scale: Scalable medium-temperature thermal energy storage system

Thermal Characteristics of a Small-Scale Medium- and High-Temperature Latent Heat Storage System at Different Inlet Flow Rates and Their Influencing Factors

Experimental study of thermal performance in a rectangular finned-tube latent heat storage device with composite polyethylene wax/expanded graphite

Research on the thermal behavior of medium-temperature phase change materials and factors influencing the thermal performance based on a vertical shell-and-tube latent heat storage system

Experimental Study on the Thermal Characteristics of a Visualized Shell-and-tube LHTES System at Different Endothermic and Exothermic Temperatures

Performance improvement of phase change material (PCM)-based shell-and-tube-type latent heat energy storage system utilizing curved fins

Experimental and numerical investigation of a rectangular finned-tube latent heat storage unit for Carnot battery

Thermal Performance Investigation of a Novel Medium-Temperature Pilot-Scale Latent Heat Storage System at Different Charging and Discharging Temperatures