Abstract:A complementary electrolyte system with 0.8 M lithium bis(fluorosulfonylimide) (LiFSI) salt and 2 wt % lithium perchlorate (LiClO4) additive in fluoroethylene carbonate (FEC)/ethyl methyl carbonate (EMC) solution enables not only stable cycling of lithium metal batteries (LMBs) with practical loading (<30 μm lithium anode, cathode loading > 4 mAh/cm2) but also outstanding degradation stability toward the end of cycle life when compared to the conventional electrolyte. Although the use of LiFSI salt can increase the electrolyte conductivity and lengthen the cycle life of LMBs, the aged lithium anode morphology formed by the sacrificial decomposition of LiFSI is highly porous, leading to an abrupt cell capacity drop toward the end of cycling. Moreover, the inability to stop aluminum corrosion by the LiFSI-based electrolyte also causes cracking of the cathode tab during prolonged cycling. It is observed that a highly porous aged lithium consumed electrolyte at a higher rate, leading to the dry-out of electrolyte solvents. On the contrary, dense aged lithium anode morphology increased the localized current applied on the lithium, causing the formation of lithium dendrite. Thus, porosity control is the key to enhance battery performance. In this complementary system, LiClO4 was introduced as an advanced additive to not only improve the capacity retention rate but also mitigate the abrupt capacity drop toward the end of cycle life because LiClO4 acted as a pore astringent reducing the porosity of the aged lithium metal anode to the desired level. Moreover, the addition of LiClO4 can also suppress the Al corrosion, allowing stable high-voltage cycling of LMBs. The synergistic effect of combining LiFSI salt and a LiClO4 additive leads to an electrolyte system that can facilitate the application of high-energy LMBs with practical electrode loading.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03017?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03017</a>.Brief statement in a nonsentence format listing the contents of the material; chemical structures and acronyms of carbonates, fluorinated carbonates, and lithium salts; pristine NMC622 cathode; backside (Al current collector) of the harvested electrode aged in the LiFSI/FEC/EMC electrolyte; Capacity retention and electrochemical impedance spectra of Li/NMC622 cells with different electrolytes; XPS spectra of C 1s, F 1s, S 2p, and Cl 2p for the pristine and harvested lithium anodes after formation under different electrolytes; Tafel plots obtained from the CV test in the Li/Cu cell with various FEC/EMC electrolytes; and SEM image of the Al working electrode before and after potentiostatic hold under different electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03017/suppl_file/am1c03017_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Compatibility of Various Electrolytes with Cation Disordered Rocksalt Cathodes in Lithium Ion Batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Improved Performance of High‐Entropy Disordered Rocksalt Oxyfluoride Cathode by Atomic Layer Deposition Coating for Li‐Ion Batteries

A Critical Evaluation of Interfacial Stability in Li-excess Cation-disordered Rock-salt Oxide Cathode

Influence of Carbonate Electrolyte Solvents on Voltage and Capacity Degradation in Li‐Rich Cathodes for Li‐ion Batteries

Complementary Electrolyte Design for Li Metal Batteries in Electric Vehicle Applications

The Role of Salt Concentration in Stabilizing Charged Ni-Rich Cathode Interfaces in Li-ion Batteries

High-Efficiency Electrolyte for Li-Rich Cathode Materials Achieving Enhanced Cycle Stability and Suppressed Voltage Fading Capable of Practical Applications on a Li-Ion Battery

Regulating the Anion Redox and Suppressing the Structural Distortion of Cation-Disordered Rock-Salt Cathode Materials to Improve Cycling Durability through Chlorine Substitution

Formation of Rocksalt Domains by Dual Substitution to Boost Electrochemical Capability of Co-Free Li-Rich Layered Cathodes

A green aqueous binder to enhance the electrochemical performance of Li-rich disordered rock salt cathode material

Unlocking Electrode Performance of Disordered Rocksalt Oxides Through Structural Defect Engineering and Surface Stabilization with Concentrated Electrolyte

Solvation-enhanced electrolyte on layered oxide cathode tailoring even and stable CEI for durable sodium storage

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Interplay Between Cation and Anion Redox in Ni-Based Disordered Rocksalt Cathodes

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Integrated rocksalt–polyanion cathodes with excess lithium and stabilized cycling

Thermal Safety Analysis of Disordered Li-Rich Rock salt Li 1.3 Mn 0.4 Nb 0.3 O 2 Cathode

Morphology Control to Enable High Capacity Li-Rich Disordered Rock Salt Cathodes

Exploring the Properties of Disordered Rocksalt Battery Cathode Materials by Advanced Characterization

On the Formation of a Cathode Electrolyte Interphase on High Voltage Li-ion Cathodes