Abstract:The chemical and electrochemical reactions at the positive electrode–electrolyte interface in Li-ion batteries are hugely influential on cycle life and safety. Ni-rich layered transition metal oxides exhibit higher interfacial reactivity than their lower Ni-content analogues, reacting via mechanisms that are poorly understood. Here, we study the pivotal role of the electrolyte solvent, specifically cyclic ethylene carbonate (EC) and linear ethyl methyl carbonate (EMC), in determining the interfacial reactivity at charged LiNi0.33Mn0.33Co0.33O2 (NMC111) and LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes by using both single-solvent model electrolytes and the mixed solvents used in commercial cells. While NMC111 exhibits similar parasitic currents with EC-containing and EC-free electrolytes during high voltage holds in NMC/Li4Ti5O12 (LTO) cells, this is not the case for NMC811. Online gas analysis reveals that the solvent-dependent reactivity for Ni-rich cathodes is related to the extent of lattice oxygen release and accompanying electrolyte decomposition, which is higher for EC-containing than EC-free electrolytes. Combined findings from electrochemical impedance spectroscopy (EIS), TEM, solution NMR, ICP, and XPS reveal that the electrolyte solvent has a profound impact on the degradation of the Ni-rich cathode and the electrolyte. Higher lattice oxygen release with EC-containing electrolytes is coupled with higher cathode interfacial impedance, a thicker oxygen-deficient rock-salt surface reconstruction layer, more electrolyte solvent and salt breakdown, and higher amounts of transition metal dissolution. These processes are suppressed in the EC-free electrolyte, highlighting the incompatibility between Ni-rich cathodes and conventional electrolyte solvents. Finally, new mechanistic insights into the chemical oxidation pathways of electrolyte solvents and, critically, the knock-on chemical and electrochemical reactions that further degrade the electrolyte and electrodes curtailing battery lifetime are provided.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c22812.Experimental setup; electrochemical data; BET surface area data; Karl Fischer titration data; additional OEMS data; additional XPS spectra; additional 1H NMR spectra and assignments; tabulated ICP data; and reaction schemes for hydrolysis and electrochemical oxidation of carbonate solvents (PDF)This article has not yet been cited by other publications.

The Role of Salt Concentration in Stabilizing Charged Ni-Rich Cathode Interfaces in Li-ion Batteries

Enhanced Stability at the Electrode-Electrolyte Interface in Ionic Liquid Electrolyte for 5 V Lithium-Ion Rechargeable Batteries

Regulating Cathode-Electrolyte Interphase by Confining Functional Aluminum Compound within Ni-Rich Cathodes

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Electrolyte Reactivity at the Charged Ni-Rich Cathode Interface and Degradation in Li-Ion Batteries

Ni-Rich Cathode Active Materials Surface Degradation in Ambient Air with Stabilisation Treatment Proposal

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Enhanced Cycling Performance of Ni-Rich Positive Electrodes (NMC) in Li-Ion Batteries by Reducing Electrolyte Free-Solvent Activity

Electrolyte stability and instability in lithium-ion batteries

Exploring the Mechanisms of LiNiO2 Cathode Degradation by the Electrolyte Interfacial Deprotonation Reaction

Interphase Engineering for Stabilizing Ni-Rich Cathode in Lithium-Ion Batteries by a Nucleophilic Reaction-Based Additive.

On the Formation of a Cathode Electrolyte Interphase on High Voltage Li-ion Cathodes

High Voltage Lib Cathodes Enabled by Salt-Reinforced Liquid Electrolytes

In -Situ Construction of a Thermodynamically Stabilized Interface on the Surface of Single Crystalline Ni-rich Cathode Materials Via a Onestep Molten -Salt Route

Modifying Surface Chemistry to Enhance the Electrochemical Stability of Nickel‐Rich Cathode Materials

Investigating Cathode Electrolyte Interphase Formation in NMC 811 Primary Particles through Advanced 4D-STEM ACOM Analysis

Strategies to Stabilize the Cathode/Electrolyte Interface in Ni-Rich NMC Based Li-Ion Batteries

Solvent-Driven Degradation of Ni-Rich Cathodes Probed by Operando Gas Analysis

Enhanced Electrochemical Performance of Ni‐Rich Layered Cathode Materials by Using LiPF6 As a Cathode Additive

Inhibition of Transition-Metal Dissolution with Advanced Electrolytes in Batteries with Silicon-Graphite Anodes and High-Nickel Cathodes

Reconstruction of Solvation Structure at the Cathode-Electrolyte Interface Via Partial De-solvation in a Metal-organic Framework