Abstract:Selective conversion of renewable sources is necessary for developing energy generation technology and protecting the environment. Herein, this work reports a one-step controllable synthesis of trimetallic NiCoFe-layered double hydroxides (NiCoFe-LDHs) nanosheets (1.36 nm) for both an efficient oxygen evolution reaction (OER) and highly selective oxidation of biomass-derived 5-hydroxymethylfurfural (HMFOR) into value-added 2,5-furandicarboxylic acid (FDCA). For comparison, two sets of bimetallic NiCo- and NiFe-LDHs were similarly synthesized and evaluated. In the OER process, the optimal NiCoFe-LDHs nanosheets exhibited the lowest necessary overpotential (288 mV) to reach 10 mA cm–2 and the smallest Tafel slope of 92 mV dec–1 compared with NiCo-LDHs (347 mV, 115 mV dec–1) and NiFe-LDHs (303 mV, 108 mV dec–1). The performance was also superior to most previously reported LDHs catalysts. Additionally, NiCoFe-LDHs nanosheets exhibited a much smaller charge transfer resistance (Rct) of 1.0 Ω and a larger Cdl value of 2.62 mF cm–2 compared with NiCo-LDHs (2.1 Ω, 1.94 mF cm–2) and NiFe-LDHs (1.4 Ω, 2.22 mF cm–2), indicating fast catalytic kinetics. Furthermore, the NiCoFe-LDHs nanosheets possessed excellent durability over 10 h, much better than that of NiCo- and NiFe-LDHs. NiCoFe-LDHs catalysts also exhibited high performance in the oxidation of 5-hydroxymethylfurfural (HMF) to FDCA, which is a key precursor for the sustainable synthesis of polymers (e.g., polyethylene 2,5-furandicarboxylate (PEF)). An ultralow overpotential of 280 mV was required to achieve 20 mA cm–2, nearly 120 mV less than the activity in pure 1.0 M NaOH. The reaction intermediates and products were qualified by liquid chromatography–mass spectroscopy system (LC-MS) and LC, where 95.5% conversion of HMF and 84.9% yield of FDCA were obtained in 1 h. The reaction kinetics and possible pathways were further investigated. As a unique report utilizing trimetallic LDHs catalysts for OER and HMFOR, this study provides a promising perspective for energy conversion and electrocatalytic processing of biomass-derived monomers.

Electrokinetic-mechanism of water and furfural oxidation on pulsed laser-interlaced Cu 2 O and CoO on nickel foam

Construction of N, O Co-Doped Carbon Anchored with Co Nanoparticles As Efficient Catalyst for Furfural Hydrodeoxygenation in Ethanol

Temporal Trends and Variation in Bronchoscopy Use for Acute Respiratory Failure in the United States

Efficient electrochemical oxidation of the biomass platform compound furfural on a Ni0.48Co0.36O0.16 electrode

Electrochemical Oxidation of 5-Hydroxymethylfurfural with NiFe Layered Double Hydroxide (LDH) Nanosheet Catalysts

Sustainable furfural biomass feedstocks electrooxidation toward value‐added furoic acid with energy‐saving H2 fuel production using Pt‐decorated Co3O4 nanospheres

Electrodeposited 3D hierarchical NiFe microflowers assembled from nanosheets robust for the selective electrooxidation of furfuryl alcohol

Heterogeneous interface induced Co3O4-NiO catalyst for efficient electrocatalytic 5-Hydroxymethylfurfural oxidation

Manifolding active sites and in situ/operando electrochemical-Raman spectroscopic studies of single-metal nanoparticle-decorated CuO nanorods in furfural biomass valorization to H2 and 2-furoic acid

Efficient Electrocatalytic Oxidation of 5-Hydroxymethylfurfural Coupled with 4-Nitrophenol Hydrogenation in a Water System

Highly selective and effective oxidation of 5-hydroxymethylfurfural by Co-Ni based electrodeposited bimetallic oxide nanostructures

Interface engineering for NiO/CeO2@NF heterostructure to boost the electro-oxidation of 5-hydroxymethylfurfural

Highly Ordered Mesoporous Co3 O4 Electrocatalyst for Efficient, Selective, and Stable Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Integrated Catalytic Sites for Highly Efficient Electrochemical Oxidation of the Aldehyde and Hydroxyl Groups in 5-Hydroxymethylfurfural

Cross-linked α-Ni(OH) 2 nanosheets with a Ni 3+ -rich structure for accelerating electrochemical oxidation of 5-hydroxymethylfurfural

Preparation of NiO-N/C composites for electrochemical oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid

Bifunctional MoNi4/Nickel Foam Electro-Catalyst for Ultra-Efficient Oxidation of High-Concentration 5-Hydroxymethylfurfural and HER

Trimetallic NiCoFe-Layered Double Hydroxides Nanosheets Efficient for Oxygen Evolution and Highly Selective Oxidation of Biomass-Derived 5-Hydroxymethylfurfural

Electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid via metal-organic framework-structured hierarchical Co3O4 nanoplate arrays

Green and efficient selective hydrogenation of furfural to furfuryl alcohol over hybrid CoOx/Nb2O5 nanocatalyst in water

Electrochemical Oxidation of 5‐hydroxymethylfurfural on Nickel Nitride/Carbon Nanosheets: Reaction Pathway Determined by in Situ Sum Frequency Generation Vibrational Spectroscopy