Abstract:Abstract Fracture characterization, including permeability and deformation due to fluid flow, plays an essential role in hydrocarbon production during the development of naturally fractured reservoirs. The conventional way of characterization of the fracture is experimental, and modeling approaches. In this study, a conceptual model will be developed based on the structural style to study the fracture distributions, the influence of the fluid flow and geomechanics in the fracture conductivity, investigate the stress regime in the study area. Understanding the fracture properties will be conducted by studying the fracture properties from the core sample, image log interpretation. 3D geomechanical models will be constructed to evaluate the fluid flow properties; the models consider the crossflow coefficient and the compression coefficient. According to the model results, the fracture permeability decreases with increasing effective stress. The degree of decline is related to the crossflow coefficient and the compression coefficient. Most of these reservoirs are mainly composed of two porosity systems for fluid flow: the matrix component and fractures. Therefore, fluid flow path distribution within a naturally fractured reservoir depends on several features related to the rock matrix and fracture systems' properties. The main element that could help us identify the fluid flow paths is the critical stress analysis, which considers the in-situ stress regime model (in terms of magnitude and direction) and the spatial distributions of natural fractures fluid flow path. The critical stress requires calculating the normal and shear stress in each fracture plane to evaluate the conditions for critical and non-critical fractures. Based on this classification, some fractures can dominate the fluid-flow paths. To perform the critical stress analysis, fracture characterization and stress analysis were described using a 3D stress tensor model capturing the in-situ stress direction and magnitude applied to a discrete fracture model, identifying the fluid flow paths along the fractured reservoir. The results show that in-situ stress rotation observed in the breakouts or drilling induce tensile fractures (DITFs) interpreted from borehole images. The stress regime changes are probably attributed to some influence of deeply seated faults under the studied sequence. the flow of water-oil ratio through intact rock and fractures with/without imbibition was modeled based on the material balance based on preset conceptual reservoir parameters to investigate the water-oil ratio flow gradients

Comparison of the classical and fracture mechanics approaches to determine in situ stress/hydrofracturing method

3D Numerical Modeling of the Propagation of Hydraulic Fracture at Its Intersection with Natural (Pre-existing) Fracture

An Efficient Computational Model for Simulating Stress-dependent Flow in Three-dimensional Discrete Fracture Networks

Coupled Hydro-Mechanical XFEM Analysis for Multi-Fracturing Through an Excavation Driven by an Underlying Aquifer: a Forensic Case Study

Characterization of Critically Stressed Fractures Using Fluid-Flow Models for Naturally Fractured Reservoirs

Water Pressure Effects on Strength and Deformability of Fractured Rocks Under Low Confining Pressures

Hydraulic Fracture Propagation in Layered Heterogeneous Rocks with Spatially Non-Gaussian Random Hydromechanical Features

Modeling reference fracture pressures to design hydraulic fracture operations using well logging data

Investigating the closure stress and crack initiation stress in fractured rocks using the student t distribution and Monte Carlo simulation method

Stress state analysis in the vicinity of the hydraulic fracturing tool located near the bottom of the well

Hydraulic Fracturing Mechanism of Rock Mass under Stress-Damage-Seepage Coupling Effect

Theoretical Analysis of Crack Reopening Behavior in Hydraulic Fracturing Tectonic Stress Measurements

Effects of Confining Stresses, Pre-crack Inclination Angles and Injection Rates: Observations from Large-Scale True Triaxial and Hydraulic Fracturing Tests in Laboratory

Comparison of the continuum damage and fracture mechanics in fatigue assessment of components containing residual stresses

Numerical Simulation of Sleeve Fracturing for In Situ Stress Measurement Using Cohesive Elements and Its Implications

Phase field method for quasi-static hydro-fracture in porous media under stress boundary condition considering the effect of initial stress field

Research and application of small-diameter hydraulic fracturing in situ stress measurement system

A Micro-Macro Mechanism of Hydraulic Fracturing with Initial Stress State Effect of Brittle Rock

Modelling Rock Fracture Induced By Hydraulic Pulses

A new method for calculating the direction of fracture propagation by stress numerical search based on the displacement discontinuity method

Theoretical and numerical analysis of stress shadow effect between echelon fractures in hydraulic fracturing of double vertical wells