Abstract:X-ray detection is widely utilized in our daily life, such as in medical diagnosis, security checking, and environmental monitoring. However, most of the commercial X-ray detectors are based on inorganic semiconductors, e.g., Si, CdTe, and Ge, which require complex and costly fabrication processes. Metal halide perovskites have recently emerged as a set of promising candidates for ionizing radiation detection, owing to the high attenuation coefficient, long carrier lifetime, and excellent charge transport properties. Perovskite single crystals have been successfully implemented in X-ray detection, but the fragile single crystals limit the device fabrication and the integration with a read-out circuit. In addition, it is hard to reach inch-size single crystals for real application. Flexible devices based on perovskite films or composite films have also been reported, but either the thickness or charge transport properties are limited by the solution processes. In this work, we introduced thermal co-evaporation to deposit highly efficient formamidinium lead iodide perovskite films. Considering the trade-off between X-ray absorption and charge transport, we optimized the active layer thickness and achieved large-area and flexible X-ray detectors with state-of-the-art device performance, including extremely low dark current and noise, fast response, and high sensitivity of 142.1 μC Gyair–1 cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20973</a>.Photographs of the front and back of a large-area, evaporated perovskite films deposited on the flexible PET substrate; the device performance statistics of perovskite photodiodes; the J–V characteristics of multiple photodiodes and typical EQE spectra of the optimized photodiode; SEM images; the comparison of the sensitivity of the evaporated perovskite X-ray detectors with various thicknesses; the temporal response of the optimized EPXDs with active layer thickness; and the long-term device stability of the optimized EPXDs encapsulated with a cover glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20973/suppl_file/am0c20973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhanced Sensitivity in Self-Powered Dion-Jacobson Perovskite X-ray Detectors via a Ternary-Solvent-Ink Approach

Dion‐Jacobson 2D Perovskite 2AMPPbBr4 with Type II Band Alignment for Highly Sensitive X‐Ray Detection

Dion–Jacobson Phase Perovskite Crystal Assembled by π‐Conjugated Aromatic Spacer for X‐Ray Detectors with an Ultralow Detection Limit

Two‐dimensionalization of 3D Perovskites for Passive Narrowband Photodetection

A two-dimensional lead-free double perovskite for self-powered and high performance X-ray detection

Centimeter‚ÄźSized Single Crystals of Dion‚ÄźJacobson Phase Lead‚ÄźFree Double Perovskite for Efficient X‚Äźray Detection

Highly stable and self-powered ultraviolet photodetector based on Dion-Jacobson phase lead-free double perovskite

Evaporated Perovskite Thick Junctions for X-Ray Detection

Superior Performance and Stability of 2D Dion–Jacobson Halide Perovskite Photodetectors Operated under Harsh Conditions without Encapsulation

Realization of Passive X‐Ray Detection with a Low Detection Limit in Dion–Jacobson Halide Hybrid Perovskite

Electron–Phonon Coupling Suppression by Enhanced Lattice Rigidity in 2D Perovskite Single Crystals for High‐Performance X‐Ray Detection

Bottom-up construction of low-dimensional perovskite thick films for high-performance X-ray detection and imaging

Monolithic integration of perovskite heterojunction on TFT backplanes through vapor deposition for sensitive and stable x-ray imaging

Synergistic strain engineering of perovskite single crystals for highly stable and sensitive X-ray detectors with low-bias imaging and monitoring

Self-Powered Photodetector Using Two-Dimensional Ferroelectric Dion–Jacobson Hybrid Perovskites

Polycrystalline hybrid perovskite with enhanced ordered crystal domains for sensitive X-ray detection

High-performance photodetector based on two-dimensional perovskite crystals with alternating interlayer cations

Ion-exchange-induced slow crystallization of 2D-3D perovskite thick junctions for X-ray detection and imaging

Air-Stable and Self-Driven Perovskite Photodiodes with High On/Off Ratio and Swift Photoresponse.

Vapor-deposited lead-free all-inorganic perovskite films with ultralow dark current for sensitive and stable X-ray detection

High-performance metal halide perovskite X-ray detectors fabricated with antisolvent-assisted spray-coating