Abstract:Low‐Velocity Impact Behavior in Sandwich Structures with Functionally Graded Cores. The present research investigates optimizing the impact resistance of functionally graded sandwich structures using experimental and numerical approaches. The low‐velocity impact (LVI) responses of functionally graded sandwich composite (FGSC) with different configurations with skin material jute/rubber/jute (JRJ) and core material having epoxy and sea sand by volume fraction of sea sand at 0%, 10%, 20%, and 30%. Sandwich structures were impacted with LVI (5.89, 10.92, and 15.18 m/s), with the impactor dropped from heights of 0.5, 1, and 1.5 m with precompressed spring loads. FGSC samples are considered a deformable body, and the impactor is modeled as a rigid body using commercially accessible dynamic explicit software. The burn‐out test and weight method were used to test the core's gradience; both methods' results substantially matched, and the variance in gradation could be observed. The proposed sandwich structure characteristics are examined by energy absorption, peak force, energy loss percentage, and coefficient of restitution. Results showed that SC30S provides greater energy absorption and superior damage resistance when tested on LVI. To evaluate the accuracy of experimental findings in predicting the indentation behavior of the sandwich structure, the finite element analysis was used to compare with the experimental results. According to the examination of these proposed FGSC overall performance, they could potentially be employed as sacrificial materials for LVI applications like claddings to shield major structural components. The systematic approach used in this work serves as a standard for choosing and using FGSC effectively for LVI applications. Highlights Low‐velocity impact behavior of sandwich structures was investigated. Combining flexible skin and epoxy core enhances energy absorption. Based on impact energy levels, impact damage areas were determined. Examined sandwich structure advantages in structural and aerospace uses. In terms of time and cost, the numerical analysis method would be useful.

Research on the influence of foaming silica gel-filled on low-velocity impact performance of M-type GFRP foldcore sandwich structure

Research on low-velocity impact performance of polyurethane foam-filled M-type GFRP foldcore sandwich plate

Experimental investigation on response mechanism and impact resistance of glass fiber reinforced polymer X‐type foldcore sandwich panel subjected to low‐velocity impact experiments

Low-velocity impact failure of foam-filled GFRP trapezoidal corrugated sandwich structures

Investigation on manufacturing and low-velocity impact performance of all-composite sandwich structure with S-type foldcore

On low-velocity impact response of foam-core sandwich panels

Study of Low-Velocity Impact Response of Sandwich Panels with Shear-Thickening Gel Cores

Experimental and numerical study on the ballistic impact resistance of the CFRP sandwich panel with the X-frame cores

Vibro-impact response of FRP sandwich plates with a foam core reinforced by chopped fiber rods

Study on low-velocity impact response and residual strength of ultralight all-CFRP sandwich structure

Dynamic response and failure of CFRP Kagome lattice core sandwich panels subjected to low-velocity impact

Experimental investigation on low-velocity impact and compression after impact behaviors of GFRP laminates with steel mesh reinforced

Impact and Post-Impact Performance of Sandwich Wall Boards with GFRP Face Sheets and a Web-Foam Core: The Effects of Impact Location

Quasi-static compression response of foldcore sandwich structure based on core evolution

Experimental and numerical investigation on low‐velocity impact response of sandwich structure with functionally graded core

Transverse impact response of GFRP tubes filled with MWCNT-reinforced syntactic foam

Experimental investigation into the synergetic damage of foam-filled and unfilled corrugated core hybrid sandwich panels under combined blast and fragment loading

The Influence of Low-Energy Impact Loads on the Properties of the Sandwich Composite with a Foam Core

Experimental and theoretical study on the response of the X-frame CFRP sandwich beam under the local impulsive loading

High-velocity impact response of metallic sandwich structures with PVC foam core

Computational Analysis of Sandwich Panels with Graded Foam Cores Subjected to Combined Blast and Fragment Impact Loading