Abstract:Recently virtual sensor arrays (VSAs) have been developed to improve the selectivity of volatile organic compound (VOC) sensors. However, most reported VSAs rely on detecting single property change of the sensing material after their exposure to VOCs, thus resulting in a loss of much valuable information. In this work, we propose a VSA with the high dimensionality of outputs based on a quartz crystal microbalance (QCM) and a sensing layer of MXene. Changes in both mechanical and electrical properties of the MXene film are utilized in the detection of the VOCs. We take the changes of parameters of the Butterworth–van Dyke model for the QCM-based sensor operated at multiple harmonics as the responses of the VSA to various VOCs. The dimensionality of the VSA's responses has been expanded to four independent outputs, and the responses to the VOCs have shown good linearity in multidimensional space. The response and recovery times are 16 and 54 s, respectively. Based on machine learning algorithms, the proposed VSA accurately identifies different VOCs and mixtures, as well as quantifies the targeted VOC in complex backgrounds (with an accuracy of 90.6%). Moreover, we demonstrate the capacity of the VSA to identify "patients with diabetic ketosis" from volunteers with an accuracy of 95%, based on the detection of their exhaled breath. The QCM-based VSA shows great potential for detecting VOC biomarkers in human breath for disease diagnosis.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13046.Material characterizations and data analysis methods; diagram of the VOC sensing system; SEM image of the nanosheets; basic BVD equivalent circuit model; resistance and reactance spectra of the QCM; multiparameter responses to four types of VOCs; responses to acetone in multiple backgrounds; dynamic response test of the VOC sensor; frequency responses to 100 ppm of four VOCs; PCA scores for PC1 and PC4 from responses to four VOCs; PCA scores from responses to four VOC mixtures; LOOCV results for the identifications of four VOCs and VOC mixtures by multiple methods; error and accuracy in concentration prediction; stability of the sensor; responses of traditional MXene-based sensors; concentrations of mixtures; and comparison for output dimensionality (PDF)This article has not yet been cited by other publications.

Hydrophobic MOF/PDMS-Based QCM Sensors for VOCs Identification and Quantitative Detection in High-Humidity Environments

High-performance Virtual Sensors Array Based on a Single-chip FBAR for Volatile Organic Compounds (vocs) Detection and Classification

MOF/PDMS Hybrid Nanofilm-based QCM for VOC Selective Virtual Sensing in High-Humidity Environments

A Wireless Electrode-Free QCM-D in a Multi-Resonance Mode for Volatile Organic Compounds Discrimination

A Hybrid Wireless Electrodeless QCM-D for the Discrimination of Volatile Organic Compounds

Sensitive Humidity Sensors Based on Ionically Conductive Metal-Organic Frameworks for Breath Monitoring and Non-Contact Sensing

Room Temperature VOCs Sensing with Termination‐Modified Ti3C2Tx MXene for Wearable Exhaled Breath Monitoring

Sodium Alginate/MXene-Based Flexible Humidity Sensors with High-Humidity Durability and Application Potentials in Breath Monitoring and Non-Contact Human–Machine Interfaces

VOC Mixture Sensing with a MOF Film Sensor Array: Detection and Discrimination of Xylene Isomers and Their Ternary Blends.

Highly Selective and Sensitive Detection of Volatile Sulfur Compounds by Ionically Conductive Metal-Organic Frameworks

Comprehensive Qualitative and Quantitative Colorimetric Sensing of Volatile Organic Compounds Using Monolayered Metal‐Organic Framework Films

Visual and Gravimetric CO2 Sensing at High Humidity Levels Enabled by MOF‐804 Cofunctionalized with Ionic Liquid and m‐Cresol Purple

Investigation of the Free-Base Zr-Porphyrin MOFs as Humidity Sensors for an Indoor Setting

Ultra-thin CoAl layered double hydroxide nanosheets for the construction of highly sensitive and selective QCM humidity sensor

Optimized Detection of Volatile Organic Compounds Utilizing Durable and Selective Arrays of Tailored UiO-66-X SURMOF Sensors

Nanoporous MIL-101(Cr) as a sensing layer coated on a quartz crystal microbalance (QCM) nanosensor to detect volatile organic compounds (VOCs)

Preparation of Functional Ordered Mesoporous Carbons and Their Application As the QCM Sensor with Ultra-Low Humidity

Specific Recognition and Adsorption of Volatile Organic Compounds by Using MIL-125-Based Porous Fluorescence Probe Material

Concurrent Sensing of CO2 and H2O from Air Using Ultramicroporous Fluorinated Metal-Organic Frameworks: Effect of Transduction Mechanism on the Sensing Performance

Flexible, non-contact and multifunctional humidity sensors based on two-dimensional phytic acid doped co-metal organic frameworks nanosheets

Virtual Sensor Array Based on Butterworth–Van Dyke Equivalent Model of QCM for Selective Detection of Volatile Organic Compounds