Abstract:The remarkable stability, suitable thermomechanical characteristics, and acceptable electrical properties of donor-doped strontium titanates make them attractive materials for fuel electrodes, interconnects, and supports of solid oxide fuel and electrolysis cells (SOFC/SOEC). The present study addresses the impact of processing and thermochemical treatment conditions on the electrical conductivity of SrTiO3-derived ceramics with moderate acceptor-type substitution in a strontium sublattice. A-site-deficient Sr0.85La0.10TiO3-δ and cation-stoichiometric Sr0.85Pr0.15TiO3+δ ceramics with varying microstructures and levels of reduction have been prepared and characterized by XRD, SEM, TGA, and electrical conductivity measurements under reducing conditions. The analysis of the collected data suggested that the reduction process of dense donor-doped SrTiO3 ceramics is limited by sluggish oxygen diffusion in the crystal lattice even at temperatures as high as 1300 °C. A higher degree of reduction and higher electrical conductivity can be obtained for porous structures under similar thermochemical treatment conditions. Metallic-like conductivity in dense reduced Sr0.85La0.10TiO3-δ corresponds to the state quenched from the processing temperature and is proportional to the concentration of Ti3+ in the lattice. Due to poor oxygen diffusivity in the bulk, dense Sr0.85La0.10TiO3-δ ceramics remain redox inactive and maintain a high level of conductivity under reducing conditions at temperatures below 1000 °C. While the behavior and properties of dense reduced Sr0.85Pr0.15TiO3+δ ceramics with a large grain size (10-40 µm) were found to be similar, decreasing grain size down to 1-3 µm results in an increasing role of resistive grain boundaries which, regardless of the degree of reduction, determine the semiconducting behavior and lower total electrical conductivity of fine-grained Sr0.85Pr0.15TiO3+δ ceramics. Oxidized porous Sr0.85Pr0.15TiO3+δ ceramics exhibit faster kinetics of reduction compared to the Sr0.85La0.10TiO3-δ counterpart at temperatures below 1000 °C, whereas equilibration kinetics of porous Sr0.85La0.10TiO3-δ structures can be facilitated by reductive pre-treatments at elevated temperatures.

Controlling the A-site deficiency and oxygen vacancies by donor-doping in pre-reductive-sintered thermoelectric SrTiO3 ceramics

Record High Thermoelectric Performance in Bulk SrTiO3 Via Nano-Scale Modulation Doping

Thermoelectric enhancement in A-site deficient high-entropy perovskite (Sr0.25Ca0.25La0.25Ba0.25)1-xTiO3±δ ceramics by fine manipulating cation vacancies

High thermoelectric performance of Nb-doped SrTiO3 bulk materials with different doping levels

Evaluation of A-site deficient Sr1−xSc0.175Nb0.025Co0.8O3−δ (x=0, 0.02, 0.05 and 0.1) perovskite cathodes for intermediate-temperature solid oxide fuel cells

First-principles calculations and high thermoelectric performance of La–Nb doped SrTiO3 ceramics

A-Site Doping to Alter Oxygen Vacancy Diffusion in SrTiO 3

The Electrical and Thermal Transport Properties of La-Doped SrTiO3 with Sc2O3 Composite

Impact of Thermochemical Treatments on Electrical Conductivity of Donor-Doped Strontium Titanate Sr(Ln)TiO3 Ceramics

A-site-deficiency range identified for in situ exsolution from (La0.4Sr0.6)1- αTi0.95Ni0.05O3± δ electrodes for SOFC and SOEC

Enhancement of Thermoelectric Performance of Sr0.9‐xNd0.1Ti0.9Nb0.1O3 Ceramics by Introducing Sr Vacancies

Enhancement of thermoelectric properties in Sr0.7Ba0.3Nb2O6−δ-based ceramics via nano-sized Ti as additive

Stable cubic crystal structure and optimized thermoelectric performance of SrTiO3 based ceramics driven by entropy engineering

Coexistence of A- and B-Site Vacancy Compensation in La-Doped Sr1−xBaxTiO3: Coexistence of A- and B-Site Vacancy Compensation

Sintering Behavior and Electrochemical Performance of A-site Deficient SrxTi0.3Fe0·7O3-δ Oxygen Electrodes for Solid Oxide Electrochemical Cells

Enhanced optical reflectivity and electrical properties in perovskite functional ceramics by inhibiting oxygen vacancy formation

Synthesis and characterization of (sm, Al) co-doped SrTiO3 with giant dielectric constant and low dielectric loss through defect engineering design

Synergic and competitive effect of A-site substitution on structure and electric property in BaTiO 3 -based ceramics

DONOR DOPING BEHAVIOR IN SrTiO3 CAPACITOR-VARISTOR CERAMICS SINTERED IN STRONGLY REDUCING ATMOSPHERE

Enhancement of Thermoelectric Performance in Rare Earth-Doped Sr3Ti2O7 by Symmetry Restoration of TiO6 Octahedra

Thermoelectric Properties of Electron Doped SrO(SrTiO3)n (n=1,2) Ceramics