Abstract:Selective catalytic NH3-to-N2 oxidation (NH3-SCO) is highly promising for abating NH3 emissions slipped from stationary flue gas after-treatment devices. Its practical application, however, is limited by the non-availability of low-cost catalysts with high activity and N2 selectivity. Here, using defect-rich nitrogen-doped carbon nanotubes (NCNT-AW) as the support, we developed a highly active and durable copper-based NH3-SCO catalyst with a high abundance of cuprous (Cu+) sites. The obtained Cu/NCNT-AW catalyst demonstrated outstanding activity with a T50 (i.e. the temperature to reach 50% NH3 conversion) of 174°C in the NH3-SCO reaction, which outperformed not only the Cu catalyst supported on N-free O-functionalized CNTs (OCNTs) or NCNT with less surface defects, but also those most active Cu catalysts in open literature. Reaction kinetics measurements and temperature-programmed surface reactions using NH3 as a probe molecule revealed that the NH3-SCO reaction on Cu/NCNT-AW follows an internal selective catalytic reaction (i-SCR) route involving nitric oxide (NO) as a key intermediate. According to mechanistic investigations by X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray absorption spectroscopy, the superior NH3-SCO performance of Cu/NCNT-AW originated from a synergy of surface defects and N-dopants. Specifically, surface defects promoted the anchoring of CuO nanoparticles on N-containing sites and, thereby, enabled efficient electron transfer from N to CuO, increasing significantly the fraction of SCR-active Cu+ sites in the catalyst. This study puts forward a new idea for manipulating and utilizing the interplay of defects and N-dopants on carbon surfaces to fabricate Cu+-rich Cu catalysts for efficient abatement of slip NH3 emissions via selective oxidation.

Synergistic catalytic wet oxidation of ammonia over carbon-supported low-loading Ru/Cu bimetallic catalyst

Modulation of Charge Distribution Enabling CuNi Nano-Alloys for Efficient Ammonia Oxidation Reaction to Nitrite Production

Preparation of Ru-doped Cu-based catalyst for enhanced electrochemical ammonia synthesis from efficient electrocatalytic nitrate reduction

Synergistically tuning intermediate adsorption and promoting water dissociation to facilitate electrocatalytic nitrate reduction to ammonia over nanoporous Ru-doped Cu catalyst

Boosting RuO2 Surface Reactivity by Cu Active Sites over Ru/Cu-SSZ-13 for Simultaneous Catalytic Oxidation of CO and NH3

Efficient removal of piperazine by catalytic wet air oxidation using RuNiCe/γ-Al 2 O 3 -activated carbon

Active Hydrogen Tuning by Copper-Cobalt Bimetal Catalysts for Boosting Ammonia Electrosynthesis from Simulated Waster Water

Enhanced Nitrate-to-Ammonia Conversion through Ag-Cu-P Catalyst for Sustainable Ammonia Generation under Ambient Conditions

Efficient and highly selective direct electrochemical oxidation of ammonia to dinitrogen facilitated by NiCu diatomic site catalysts

Selective catalytic oxidation of ammonia to N2 over wire–mesh honeycomb catalyst in simulated synthetic ammonia stream

Low-temperature NH3 abatement via selective oxidation over a supported copper catalyst with high Cu+ abundance

Ru-Based Catalysts for Ammonia Decomposition: A Mini-Review

Ammonia Abatement via Selective Oxidation over Electron-Deficient Copper Catalysts

Efficient conversion of low-concentration nitrate sources into ammonia on a Ru-dispersed Cu nanowire electrocatalyst

Enhanced Ammonia Synthesis Activity of Ceria-Supported Ruthenium Catalysts Induced by CO Activation

Highly Dispersed Ruthenium Nanoparticles on Y 2 O 3 as Superior Catalyst for Ammonia Decomposition

Electrocatalytic nitrate reduction to ammonia over Cu/Cu2O catalysts with controllable ratios

Enhanced performance of Nb2O5 decorated RuO2/Sn0.2Ti0.8O2 for selective catalytic oxidation of ammonia

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

Coupling ultralow-content ruthenium with nickel hydroxide via corrosion engineering for highly efficient hydrogen generation from ammonia borane

Fe/Cu diatomic catalysts for electrochemical nitrate reduction to ammonia