Advances in Nanostructured Metallic Materials—A Pathway to Future Innovations

Marek Wojnicki,Marc Escribà-Gelonch,Volker Hessel

DOI: https://doi.org/10.3390/met14111237

IF: 2.695

2024-10-30

Metals

Abstract:The development of civilization has always been deeply intertwined with advancements in metallurgy [...]

materials science, multidisciplinary,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Linli Zhu,Aiying Chen,Jian Lu

DOI: https://doi.org/10.1063/2.12021012

2012-01-01

Theoretical and Applied Mechanics Letters

Abstract:Engineering nanostructures in metallic materials such as nanograins and nanotwins can promote plastic performance significantly. Nano/ultrafine-grained metals embedded in coarse grains called bimodal metals and nanotwinned polycrystalline metals have been proved to possess extensively improved yield strength whilst keeping good ductility. This paper will present an experimental study on nanostructured stainless steel prepared by surface mechanical attrition treatment (SMAT) with surface impacts of lower strain rate (10 s−1–103 s−1) and higher strain rate (104 s−1–105 s−1). Microstructure transition has been observed from the original γ-austenite coarse grains to α′-martensite nanograins with bimodal grain size distribution for lower strain rates to nanotwins in the ultrafine/coarse grained austenite phase for higher strain rates. Meanwhile, we will further address the mechanism-based plastic models to describe the yield strength, strain hardening and ductility in nanostructured metals with bimodal grain size distribution and nanotwinned polycrystalline metals. The proposed theoretical models can comprehensively describe the plastic deformation in these two kinds of nanostructured metals and excellent agreement is achieved between the numerical and experimental results. These models can be utilized to optimize the strength and ductility in nanostructured metals by controlling the size and distribution of nanostructures.
Advanced Processes in Metallurgical Technologies

Mariola Saternus,Ladislav Socha

DOI: https://doi.org/10.3390/met14091049

IF: 2.695

2024-09-15

Metals

Abstract:The production of metals and their alloys will continue to increase in the coming years, mainly due to the growing demand for these products [...]

materials science, multidisciplinary,metallurgy & metallurgical engineering
Advanced Machining Technology for Modern Engineering Materials

Panagiotis Karmiris-Obratanski,Muthuramalingam Thangaraj,Beata Leszczyńska-Madej,Angelos P. Markopoulos

DOI: https://doi.org/10.3390/ma17092064

IF: 3.4

2024-04-29

Materials

Abstract:Advances in material science have indeed revolutionized engineering, bringing forth a suite of new materials with remarkable properties [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Advancing Extractive Metallurgy: Computational Approaches for a Sustainable Future

Alessandro Navarra

DOI: https://doi.org/10.3390/pr12112410

IF: 3.5

2024-11-02

Processes

Abstract:Extractive metallurgy, combined with mineral processing, is at the heart of modern industry, facilitating the transformation of raw mineral resources into valuable metals essential for infrastructure, technology, and energy systems [...]

engineering, chemical
Nanostructured Materials and Nanocomposites by Mechanical Alloying: An Overview

C. Suryanarayana,Ahmed A. Al-Joubori,Zhi Wang

DOI: https://doi.org/10.1007/s12540-021-00998-5

IF: 3.451

2021-08-21

Metals and Materials International

Abstract:The technique of mechanical alloying, although originally developed to produce oxide-dispersion-strengthened superalloys for aerospace and high-temperature applications, is now recognized as an important and versatile technique to synthesize metastable and advanced materials with a high potential for widespread applications. Mechanical alloying involves repeated cold welding, fracturing, and rewelding of powder particles in a high-energy ball mill. The reduced diffusion distances between metal powder layers formed as a result of heavy deformation, introduction of a high density of crystal defects, and a slight rise in powder temperature contribute to alloy formation from blended elemental powders. The type of phases/materials produced by mechanical alloying of powder mixtures include supersaturated solid solutions, intermetallics, quasicrystalline alloys, high-entropy alloys, amorphous alloys, and composites. If the material produced is crystalline in nature, most often the grain size is in the nanometer size. Amongst these phases, nanostructured materials and nanocomposites have been the most important types investigated. In this contribution, we will present an overview of the processing, characteristics, and properties of nanocrystalline materials and nanocomposites produced by mechanical alloying, with special emphasis on our recent work.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Phase Engineering of Nanostructural Metallic Materials: Classification, Structures, and Applications

Jialun Gu,Fenghui Duan,Sida Liu,Wenhao Cha,Jian Lu

DOI: https://doi.org/10.1021/acs.chemrev.3c00514

IF: 62.1

2024-01-24

Chemical Reviews

Abstract:Metallic materials are usually composed of single phase or multiple phases, which refers to homogeneous regions with distinct types of the atom arrangement. The recent studies on nanostructured metallic materials provide a variety of promising approaches to engineer the phases at the nanoscale. Tailoring phase size, phase distribution, and introducing new structures via phase transformation contribute to the precise modification in deformation behaviors and electronic structures of...

chemistry, multidisciplinary
Recent Progress on Metal‐Based Nanomaterials: Fabrications, Optical Properties, and Applications in Ultrafast Photonics (Adv. Funct. Mater. 49/2021)

Bo Fu,Jingxuan Sun,Yuan Cheng,Hao Ouyang,Giuseppe Compagnini,Peng Yin,Songrui Wei,Shaojuan Li,Dabing Li,Vittorio Scardaci,Han Zhang

DOI: https://doi.org/10.1002/adfm.202170363

IF: 19

2021-12-01

Advanced Functional Materials

Abstract:Metal‐Based Nanomaterials In article number 2107363, Vittorio Scardaci, Han Zhang, and co‐workers focus on metal‐based nanomaterials, including pure metal and metal oxide nanoparticles. The typical fabrication methods and excellent optical properties are illustrated in detail, which promote the potential applications enabled by metal‐based nanomaterials in ultrafast photonics.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
3D Metallic Structures: A Review on Micro/Nanoforming to Fabricate 3D Metallic Structures (Adv. Mater. 6/2021)

Jie Xu,Xinwei Wang,Chuanjie Wang,Lin Yuan,Wanji Chen,Jianxing Bao,Qian Su,Zhenhai Xu,Chunju Wang,Zhenlong Wang,Debin Shan,Bin Guo

DOI: https://doi.org/10.1002/adma.202170044

IF: 29.4

2021-02-01

Advanced Materials

Abstract:<p>In article number <a href="https://doi.org/10.1002/adma.202000893">2000893</a>, Debin Shan, Bin Guo, and co‐workers survey the recent progress of micro/nano forming techniques for fabricating 3D metallic structures. The complex interplay among the factors that influence the so‐called size effect occurs in terms of materials, processes, tools and machines during micro/nano forming. High energies of the physical (electrical, ultrasonic, magnetic, thermal, etc.) fields directly/indirectly act on material aggregation, transfer, absorption, and conversion in multiscale structures, producing multiscale 3D metallic structures of high quality with great application potential in microelectronics, aerospace, automotive, and medical engineering. </p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Metals by micro-scale additive manufacturing: comparison of microstructure and mechanical properties

Alain Reiser,Lukas Koch,Kathleen A. Dunn,Toshiki Matsuura,Futoshi Iwata,Ofer Fogel,Zvi Kotler,Nanjia Zhou,Kristin Charipar,Alberto Piqué,Patrik Rohner,Dimos Poulikakos,Sanghyeon Lee,Seung K. Seol,Ivo Utke,Cathelijn van Nisselroy,Tomaso Zambelli,Jeffrey M. Wheeler,Ralph Spolenak

DOI: https://doi.org/10.1002/adfm.201910491

2019-12-08

Abstract:Many emerging applications in microscale engineering rely on the fabrication of three-dimensional architectures in inorganic materials. Small-scale additive manufacturing (AM) aspires to provide flexible and facile access to these geometries. Yet, the synthesis of device-grade inorganic materials is still a key challenge towards the implementation of AM in microfabrication. Here, we present a comprehensive overview of the microstructural and mechanical properties of metals fabricated by most state-of-the-art AM methods that offer a spatial resolution $\leq$10$\mu$m. Standardized sets of samples were studied by cross-sectional electron microscopy, nanoindentation and microcompression. We show that current microscale AM techniques synthesize metals with a wide range of microstructures and elastic and plastic properties, including materials of dense and crystalline microstructure with excellent mechanical properties that compare well to those of thin-film nanocrystalline materials. The large variation in materials performance can be related to the individual microstructure, which in turn is coupled to the various physico-chemical principles exploited by the different printing methods. The study provides practical guidelines for users of small-scale additive methods and establishes a baseline for the future optimization of the properties of printed metallic objects $-$ a significant step towards the potential establishment of AM techniques in microfabrication.

Materials Science
Metal/semiconductor interfaces in nanoscale objects: synthesis, emerging properties and applications of hybrid nanostructures

Michael Volokh,Taleb Mokari

DOI: https://doi.org/10.1039/c9na00729f

IF: 5.598

2020-01-01

Nanoscale Advances

Abstract:Multi-component crystals of various shapes, sizes and compositions (hybrid nanostructures) are much sought-after functional materials. Herein, the synthesis and emerging properties of nanomaterials with metal/semiconductor interface(s) are reviewed.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Special Issue “Advanced Refractory Alloys”: Metals, MDPI

Oleg N. Senkov,Panagiotis (Panos) Tsakiropoulos,Jean-Philippe Couzinié

DOI: https://doi.org/10.3390/met12020333

IF: 2.695

2022-02-14

Metals

Abstract:Metallic materials with extreme and often unusual combinations of properties are always in high demand in the competitive world market [...]

materials science, multidisciplinary,metallurgy & metallurgical engineering
Metal Matrix Nanocomposites: A Brief Overview

Prashil U. Sarode,Jhantu G. Raul,Aditya S. Gaikwad,S. H. Gawande

DOI: https://doi.org/10.2174/2210681213666230301152349

2023-03-01

Nanoscience & Nanotechnology-Asia

Abstract:Abstract: The need for lightweight materials is increasing at a faster rate in the engineering field. It demands materials with high strength, low weight, and properties like ductility and formability which are required for easier processing of the material. When conventional pure metals and alloys failed to meet this demand, many researchers turned their attention toward developing composites. Composites can be fabricated from metal, polymer, and ceramic as base materials which are known as metal matrix composites (MMC), polymer matrix composites (PMC), and ceramic matrix composites (CMC), MMC are of special importance due to properties like strength, stiffness, and formability which are difficult to obtain from PMC and CMC. Even though conventional composites with micron-size reinforcement have enhanced certain properties like strength, hardness, and wear resistance, it deteriorated other desirable properties like ductility. To overcome these limitations of micro-composites, a new category of materials known as nanocomposite has been developed. Nano composites are materials that contain nano-scale reinforcement in different forms. This review article summarizes the recent progress in the field of metal matrix Nano composite (MMNC). Methods of fabrication which are applicable for metal alloys and micro-composites are mostly not suitable for nanocomposite fabrication, the recently developed fabrication process which are applicable for MMNC’s are discussed in this article. The effects of added nano reinforcement on the microstructure are also discussed with suitable examples. Enhancements in mechanical, tribological, and physical properties are explained in depth with the help of recently published data. Strengthening mechanisms are described with the help of empirical relations. Although industrial applications of metal matrix nano composites are limited due to the ongoing developments in this field, a few important potential application areas are also discussed at the end of this article.
Femtosecond‐Laser Direct Writing of Metallic Micro/Nanostructures: from Fabrication Strategies to Future Applications

Zhenqiang Ma,Yong‐Lai Zhang,Bing Han,Qi‐Dai Chen,Hong‐Bo Sun

DOI: https://doi.org/10.1002/smtd.201700413

IF: 12.4

2018-01-01

Small Methods

Abstract:The past decade has seen growing research interest in developing novel fabrication methodologies for metallic micro/nanostructures toward the rational design and integration of 0D to 3D metallic configurations. Among the various fabrication techniques, femtosecond‐laser direct writing has emerged as a prominent approach to reach this goal and greatly facilitates the development of metallic micro/nanostructure‐enabled applications. Here, a series of femtosecond‐laser‐mediated fabrication strategies, including the two‐photon reduction of metal ions, template‐assisted metal coating and metal filling, photodynamic assembly of metal nanoparticles, and selective nanoparticle sintering, are summarized. Additionally, abundant applications in microelectronics, metamaterials, near‐field optics, microfluidics, micromechanics, and microsensors are introduced in detail. Current challenges and future perspectives in this field are also discussed.
Emerging Technologies in the Development of Metallic and Bimetallic Nanoparticles in the Last Decade: A Scientometric Analysis

Maria Mercedes Cely-Bautista,Grey Castellar-Ortega,Javier Jaramillo-Colpas

DOI: https://doi.org/10.5614/j.eng.technol.sci.2023.55.2.7

2023-06-14

Journal of Engineering and Technological Sciences

Abstract:The development of nanotechnology and nanomaterials has had an upward surge in recent years, not only because of the type of technology but also because of the unique properties and characteristics of nanomaterials. This growth motivated us to make an analysis of emerging technologies in the development of metallic, bimetallic, and metal-oxide nanoparticles covering a period of ten years, which have had a high impact on the development of different products applied to biomedicine, electronics, agriculture, energy, plastics, etc. This research found more than one and a half million scientific papers under the keyword ‘nanotechnology’ in the Scopus database. This article reports a scientometric analysis where aspects such as articles with the highest number of citations, countries with the highest production, representative institutions in the field, authors and the relation of citations, correlations between them, keyword analysis, as well as the most studied topics in this field were investigated. On the other hand, the number of patents produced was reviewed in a general way. The databases Scopus, Journal Citation Report, VOSviewer, and other computer tools were used for the analysis. The results showed the United States (17.3%) and China (15.3%) as the countries with the greatest impact on studying metallic and bimetallic nanoparticles, with a high correlation between different countries. It is worth highlighting the participation of India with 10.1% and more than twice as many scientific papers as Germany; in the case of patents, the United States and China accounted for 55.3% of the total patents.
Nanoarchitected metal/ceramic interpenetrating phase composites

Jens Bauer,Martí Sala-Casanovas,Mahsa Amiri,Lorenzo Valdevit

DOI: https://doi.org/10.1126/sciadv.abo3080

IF: 13.6

2022-08-19

Science Advances

Abstract:Architected metals and ceramics with nanoscale cellular designs, e.g., nanolattices, are currently subject of extensive investigation. By harnessing extreme material size effects, nanolattices demonstrated classically inaccessible properties at low density, with exceptional potential for superior lightweight materials. This study expands the concept of nanoarchitecture to dense metal/ceramic composites, presenting co-continuous architectures of three-dimensional printed pyrolytic carbon shell reinforcements and electrodeposited nickel matrices. We demonstrate ductile compressive deformability with elongated ultrahigh strength plateaus, resulting in an extremely high combination of compressive strength and strain energy absorption. Simultaneously, property-to-weight ratios outperform those of lightweight nanolattices. Superior to cellular nanoarchitectures, interpenetrating nanocomposites may combine multiple size-dependent characteristics, whether mechanical or functional, which are radically antagonistic in existing materials. This provides a pathway toward previously unobtainable multifunctionality, extending far beyond lightweight structure applications.

multidisciplinary sciences
Nanoporous metals: a new class of nanostructured energy materials

DING Yi

2011-01-01

Abstract:Dealloyed nanoporous metals(NPMs) represent a new class of functional materials with unique structural properties such as high surface area,low density,high permeability,high electrical and thermal conductivity,and tunable structural features,which make them very attractive for important applications including catalysis,separation,and energy and environmental technologies.This article tends to provide an overview of the recent advances in this area,regarding their preparation,structure and interfacial properties.In particular,we will address their great potential as next generation electrode materials for new energy technologies.
State of the Art: Applications of Mechanically Alloyed Nanomaterials—A Review

Vikas Chawla,S. Prakash,B. S. Sidhu

DOI: https://doi.org/10.1080/10426910701235900

IF: 4.7832

2007-03-29

Materials and Manufacturing Processes

Abstract:Nanostructured materials as a new class of engineering materials with enhanced properties and structural length scale between 1 and 100 nm can be produced by a variety of different methods. Mechanical alloying (MA) technique is one of the processes to produce nanomaterials. This process involving milling of constituent powder in high-energy ball mills goes extensive mechanical deformation due to ball-powder-ball and ball-powder-container collisions that occur during MA. The development of strong oxide dispersion strengthened (ODS) alloys has been the prime goal of Benjamin's group, which invented the MA technique. But, the possibility of synthesizing a variety of materials has made MA an exciting field to work in for many investigators. Mechanically alloyed nickel-based, iron-based superalloys, and aluminum-based alloys are in commercial production. The ODS Al-base alloys made by MA are found to be much superior to the traditional alloys in term of strength and hardness value even at high temperature. The mechanical alloying process attracts the attention of a large group of researchers and technologists basically because of its potential to produce a variety of materials in the simplest possible way. MA definitely has a bright future as a solid-state processing route.

materials science, multidisciplinary,engineering, manufacturing
Nanomaterials

DOI: https://doi.org/10.5772/1371

2011-12-22

Abstract:The book "Nanomaterials" includes all aspects of metal-oxide nano-structures, nano-composites, and polymer materials instigating with materials survey and preparations, growth and characterizations, processing and fabrications, developments and potential applications. These topics have utilized innovative methods of preparation, improvement, and continuous changes in multidimensional ways. The innovative frontiers are branching out from time to time to advanced nanotechnology. It is an important booklet for scientific organizations, governmental research-centers, academic libraries, and the overall research and development of nano-materials in general. It has been created for widespread audience with diverse backgrounds and education.
Revolutionizing Metallic Biomaterials

Zheng Yufeng,Wu Yuanhao

DOI: https://doi.org/10.11900/0412.1961.2016.00529

IF: 1.797

2017-01-01

ACTA METALLURGICA SINICA

Abstract:Entering 21st century, the metallic biomaterials are revolutionizing. New kinds of metallic biomaterials represented by biodegradable metals, nacocrystalline metals and alloys, and bulk metallic glasses, had been explored as implantable biomaterials, and correspondingly the nature of metallic biomaterials are shifting from the bio-inert (with stainless steel, Co-based alloys and Ti alloys) to bio-active and multi-biofunctional (anti-bacterial, anti-proliferation, anti-cancer, etc.). The newly-emerging 3D printing technology and thin film technology had been applied to the advancing manufacture and intelligence of the medical devices made of metallic biomaterials. In this paper, the current research status of the revolutionizing metallic biomaterials had been reviewed, and the future research and development tendencies for newly-developed metallic biomaterials towards bio-functionalization, composite and intelligence are also proposed.
Advances in Nano-Electrochemical Materials and Devices

Mei Wang,Xuyuan Chen,Nabin Aryal

DOI: https://doi.org/10.3390/nano14080712

IF: 5.3

2024-04-18

Nanomaterials

Abstract:Nano-electrochemical materials and devices are at the frontier of research and development, advancing electrochemistry and its applications in energy storage, sensing, electrochemical processing, etc [...]

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry

Advances in Nanostructured Metallic Materials—A Pathway to Future Innovations

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Advanced Processes in Metallurgical Technologies

Advanced Machining Technology for Modern Engineering Materials

Advancing Extractive Metallurgy: Computational Approaches for a Sustainable Future

Nanostructured Materials and Nanocomposites by Mechanical Alloying: An Overview

Phase Engineering of Nanostructural Metallic Materials: Classification, Structures, and Applications

Recent Progress on Metal‐Based Nanomaterials: Fabrications, Optical Properties, and Applications in Ultrafast Photonics (Adv. Funct. Mater. 49/2021)

3D Metallic Structures: A Review on Micro/Nanoforming to Fabricate 3D Metallic Structures (Adv. Mater. 6/2021)

Metals by micro-scale additive manufacturing: comparison of microstructure and mechanical properties

Metal/semiconductor interfaces in nanoscale objects: synthesis, emerging properties and applications of hybrid nanostructures

Special Issue “Advanced Refractory Alloys”: Metals, MDPI

Metal Matrix Nanocomposites: A Brief Overview

Femtosecond‐Laser Direct Writing of Metallic Micro/Nanostructures: from Fabrication Strategies to Future Applications

Emerging Technologies in the Development of Metallic and Bimetallic Nanoparticles in the Last Decade: A Scientometric Analysis

Nanoarchitected metal/ceramic interpenetrating phase composites

Nanoporous metals: a new class of nanostructured energy materials

State of the Art: Applications of Mechanically Alloyed Nanomaterials—A Review

Nanomaterials

Revolutionizing Metallic Biomaterials

Advances in Nano-Electrochemical Materials and Devices