Abstract:The failure of composite laminates under cyclic fatigue loads is complex, as multiple failure mechanisms are in play at different scales and interact with each other. Predicting the remaining fatigue life as well as the residual capacities of a composite laminate or component is crucial, particularly for safety-critical applications. A progressive fatigue model is proposed to describe the catastrophic failure of open-hole laminates under tensile cyclic fatigue. To represent both intra-laminar and inter-laminar damage, a combination of a continuum damage mechanics model (CDM) and a discrete cohesive zone model (CZM) is implemented in the finite element (FE) software Abaqus. The CDM combines fibre- and matrix-dominated S-N curves with the Palmgren–Miner accumulation rule and Hashin’s residual strength to form a fatigue failure criterion differentiating between fibre failure (FF) and matrix failure (MF). The CZM implemented in this work is the CF20 model proposed by NASA. Fatigue cycling is simulated using an external cycle-jump scheme, where the stiffness degradation is conducted between the FE simulations outside of the implicit solver [90/0] s. Glass fibre reinforced polymer (GFRP) open-hole specimens were tested in tensile cyclic fatigue at a load ratio of 0.1. The experiments were reproduced numerically and the results compared. After calibration of a set of parameters based on one load level, the model was able to reproduce the experimental S-N curve very well, predicting a slope of −0.10, while the experimental value was −0.11. The failure sequence of the laminate was also successfully reproduced. The growth of the split from the hole, and its interaction with inter-laminar delamination, was successfully captured. The proposed approach was able to describe the fatigue failure of an open-hole laminate with a minimal set of material inputs using a simplified fatigue damage model while avoiding convergence issues.

Fatigue life prediction of hybrid carbon-flax-epoxy laminates using progressive failure analysis and cohesive zone model

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

RESEARCH ON FATIGUE LIFE FOR 3D COMPOSITE LAMINATES BASED ON PROGRESSIVE DAMAGE

Fatigue life prediction of composite laminates incorporating 3D stress analysis

Fatigue Life Prediction of Composite Laminates Based on Progressive Damage Analysis

Progressive Fatigue Modelling of Open-Hole Glass-Fibre Epoxy Laminates

A New Method to Predict Fatigue Life of Composite Laminate with Delaminating Effect Considered

Finite Element Analysis and Fatigue Life Predication of Lamination

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Fatigue life prediction method of carbon fiber-reinforced composites

Reliability Prediction For Fatigue Damage And Residual Life In Composites

Progressive Fatigue Damage Modelling of Fibre-Reinforced Composite Based on Fatigue Master Curves

A Nonlinear Fatigue Damage Model for Life Prediction of Composite Laminates

A numerical framework for simulating progressive failure in composite laminates under high-cycle fatigue loading

Life Prediction Methodology for Composite Laminates

Modeling of progressive high-cycle fatigue in composite laminates accounting for local stress ratios

Fatigue Life Prediction of Multidirectional Composite Laminate

Progressive fatigue damage modeling of laminated composites using a novel combined fatigue life model

A Methodology to Predict the Fatigue Life under Multi-Axial Loading of Carbon Fiber-Reinforced Polymer Composites Considering Anisotropic Mechanical Behavior

Damage Behavior and Life Prediction Model of Composite Laminates under Combined High and Low Cycle Fatigue

Finite Element Analysis of Progressive Failure and Strain Localization of Carbon Fiber/Epoxy Composite Laminates by ABAQUS