Abstract:Aiming at the unsatisfactory low-frequency sound absorption effect of Helmholtz resonator, a novel broadband low-frequency ventilation absorber with rough neck is proposed. The roughness is introduced into the neck of Helmholtz resonator to change the shape of the neck and achieve the structure of rough neck Helmholtz resonator. The proposed absorber can effectively provide the acoustic impedance required for low-frequency sound absorption without changing the overall size, thereby reducing the resonant frequency. The finite element method is used to simulate the structure, and the impedance tube sound absorption test is carried out to verify it. The experimental and simulation results show high consistency with each other. The results also indicate that the rough neck Helmholtz resonator absorber with roughness introduced in the neck achieves an absorption peak at 58 Hz, with an absorption coefficient of about 0.63. Comparing with the absorber without roughness introduced, the resonant peak frequency becomes low, from 70 Hz to 58 Hz, reducing 17.1%. Therefore, adjusting the neck roughness can serve as a method of tuning the acoustic performance, and the absorption peak frequency can be adjusted by appropriately increasing the neck roughness so as to move it in the low frequency direction. Based on the verification that the roughness of the neck can effectively reduce the absorption peak frequency of Helmholtz resonator, a broadband low-frequency ventilation absorber with a rough neck, which is composed of eight absorption units, is designed. Through simulation calculation and experimental exploration, the absorption coefficient can achieve more than 0.8 in a target working frequency band of 500－1100 Hz. On this basis, the acoustic impedance of the structure can be adjusted by introducing roughness into the neck of Helmholtz resonator, so as to obtain the optimized broadband low-frequency ventilation absorber with a rough neck, which achieves a broadband sound absorption coefficient higher than 0.8 in a frequency range of 400–1200 Hz. The optimized structure also has 8 consecutive absorption peaks with amplitudes above 0.95. The proposed low-frequency broadband ventilation absorber provides a reference for designing and optimizing efficient low-frequency subwavelength acoustic absorbers. It has a wide range of applications in pipeline noise control.

Collaborative Optimization of Phononic Crystal Pipe Based on Revolving Helmholtz Resonators for Air Compressor System in FCEVs

Multi-band Design for One-Dimensional Phononic Crystals

Intelligent Optimization Design of a Phononic Crystal Air-Coupled Ultrasound Transducer

Analysis of Vibration-Damping Characteristics and Parameter Optimization of Cylindrical Cavity Double-Plate Phononic Crystal

Low-frequency noise reduction based on quasi-bandgap of phononic crystal structures

A Low-Frequency Wideband Ventilation Muffler Based on an Embedded Rough-Necked Helmholtz Resonator

A better compression driver? CutFEM 3D shape optimization taking viscothermal losses into account

Tunable silencer for rectangular ventilation duct based on composite Helmholtz resonators

Design optimization for broadband sound insulation by double-panel structure with a slot-type Helmholtz resonator array at low frequency range

An Extremely Anisotropic Phononic Crystal with Open Elliptical Dispersion for Energy Convergence and Beam Squeezing

A locally-resonant phononic crystal for low-frequency vibration control of vehicles

Maximizing acoustic band gap in phononic crystals via topology optimization

Sound Regulation of Coupled Helmholtz and Fabry-Pérot Resonances in Labyrinth Cavity Structures.

Study on low-frequency bandgaps and sound isolation characteristics of a novel Helmholtz type phononic crystal

Analysis of Flexural and Torsional Vibration Band Gaps in Phononic Crystal Beam

Inverse design of high-Q wave filters in two-dimensional phononic crystals by topology optimization

Development and Optimization of Broadband Acoustic Metamaterial Absorber Based on Parallel–Connection Square Helmholtz Resonators

Multi-objective optimization of muffler for vehicle air-conditioning compressor pipeline

Flexural–torsional vibration reduction of an eccentric phononic crystal pipe conveying fluid

Reverse design and application of phononic crystals based on deep learning

Acoustic attenuation of side-branched Helmholtz resonator with embedded apertures in grazing flow ducts