Abstract:In recent years, the vibration and noise reduction performance of military aircraft has become an important index to measure its performance. In order to solve the problem of low-frequency noise generated by military aircraft, a novel Helmholtz two-dimensional phononic crystal was constructed in this paper. The structure adopts maze-shaped air channel and adds rigid oscillators. Under the condition that the lattice constant is 62 mm, the lower limit of the first band gap is reduced to about 15 Hz. The structure has four complete band gaps in the range of 0~500 Hz, respectively 15.223~17.464 Hz, 107.46~200.68 Hz, 231.18~310.68 Hz, 341.14~404.49 Hz. In addition, the sound reduction index of the structure reached 25 dB at 15 Hz, and two peaks of more than 150 dB appeared at at about 107 Hz and 231Hz. which shows distinct sound insulation ability in the low-frequency range. It has has engineering significance in the application of low-frequency noise control in the aircraft cabin. The cause of the band gap is explored by analyzing the vibration mode and sound pressure field. The “spring-oscillator” of the structure model was established by the method of "Mechanical-acoustic analogy". The finite element method and transfer matrix method are used to calculate the upper and lower limits of the first band gap. The study shows that for the first gap of the structure, the results obtained by the two methods are similar, which indicates the correctness of the model hypothesis. Secondly, the effects of structural parameters such as the lattice constant, the length of the air channel and the oscillator material on the first band gap are investigated by finite element method and equivalent model method. The study shows that the increase of the length of air channel and lattice constant will reduce the lower limit of the first band gap when other structural parameters remain unchanged. Moreover, the increase of the density of the oscillator material can effectively reduce the upper and lower limits of the second band gap, which further reveals the essence of the formation of the band gap of the structure and verifies the accuracy of the equivalent model. This study provides theoretical support for low frequency noise control and broadens the design of low-frequency phononic crystals.

Low-frequency noise reduction based on quasi-bandgap of phononic crystal structures

Experimental and Theoretical Investigation of Lowering the Band Gaps of Phononic Crystal Beams Through Fluid-Solid Coupling

Study on low-frequency bandgaps and sound isolation characteristics of a novel Helmholtz type phononic crystal

Multi-band Design for One-Dimensional Phononic Crystals

Thermal Tuning of the Interfacial Adhesive Layer on the Band Gaps in a One-Dimensional Phononic Crystal

Low-Frequency Bandgap Characterization of a Locally Resonant Pentagonal Phononic Crystal Beam Structure

On the lowest-frequency bandgap of 1D phononic crystals

A metamaterial for low-frequency vibration damping

Topological design of square lattice structure for broad and multiple band gaps in low-frequency range

Collaborative Optimization of Phononic Crystal Pipe Based on Revolving Helmholtz Resonators for Air Compressor System in FCEVs

Study on Elastic Wave Band Gap Excitation of Phononic Crystal at Ultra-Low Filling Rate

Maximizing acoustic band gap in phononic crystals via topology optimization

Investigation on tunable low-frequency property of magnetic field induced phononic crystal with Archimedean spiral-beams

Broadband ventilated acoustic barrier with low reflection

Low-frequency locally resonant band-gaps in phononic crystal plates with periodic spiral resonators

Low-Frequency Ultrawide Band Gap Study of Symmetric Conical Scatterer Phononic Crystal

Thermal tuning of band structures in a one-dimensional phononic crystal

Three-dimensional phononic crystals with self-similar structures

Vibrational loss analysis of a new type of phononic crystal with a tungsten block embedded inside a rubber matrix

Low-frequency broadband vibration reduction based on a square spiral beam local resonance phononic crystal

Band gaps in phononic crystals: Generation mechanisms and interaction effects