Distributed Energy Resources ( DERs ) : Impact of Reverse Power Flow on Transformer

P. Upadhyay

Abstract:The analysis of this paper will answer two important questions, (i) does reverse power flow impact the performance of existing transformers in the grid? and (ii) does It make sense to replace interface transformer using a customised design to minimize restrictions on reverse power flow? The answer to both questions is “YES”, and the reasons and operating limits are presented in this paper. The global energy demand is predicted to increase at about 5% compound annual growth rate (CAGR). The power industry demands the least life cycle cost (LLCC) with respect to lower capital cost and running cost. The wind (539 GW) and solar (403 GW) markets are the two major variable renewable energy (VRE) sources sharing the majority of new renewable generating capacity globally. Due to the highly unpredictable nature of such VRE sources, in many circumstances, the instantaneous power demand and supply do not always match, and insufficient energy storage capacity at the DER generating nodes leads to reverse power flow towards the grid. Having large capital investments, renewable developers would like to see maximum energy production achieved to minimize payback periods. However, under lower demand periods, utilities and grid operators reject the renewable energy fed back to the grid. The interconnection transformers observe loss of life due to the impact of the reverse power flow. Transformers are the back-bone of the grid, and the expected life of substation and grid interface transformers are very high. Increased loss and thermal cycling reduce transformer life. Small increase in the excitation voltage above the limits leads to significant magnetizing current increase and harmonics. The core losses impact the temperature-rise and the life of the transformer. Comparing the results of various operating conditions, reverse active and reactive power flow is the worst. There should be restrictions on power flow without the loss of transformer life or else transformer needs to be replaced with the customized designs to assure the standard life.

Engineering,Environmental Science