Abstract:The hot compression tests for Mo–3 vol.%Al2O3 alloys were conducted on a Gleeble-1500D thermo-mechanical simulator in the temperatures range of 1000–1300 °C and strain rates range of 0.005–1 s−1. The hot deformation behavior, mechanism associated with microstructure evolution of Mo–3 vol.%Al2O3 alloys was investigated by electron backscattering diffraction analysis. Three types of stress–strain curves were analyzed by quantifying the work hardening rate. The deformation mechanism at 1000–1300 °C mainly included the plastic deformation of Mo–3 vol.%Al2O3 alloy, as well as the dynamic recovery and recrystallization of Mo matrix. The modified Arrhenius, Modified Johnson–Cook and modified Zerilli–Armstrong constitutive equations were established and evaluated by the correlation coefficient (Rc) and average absolute relative error (\({\bar{\text{e}}}\)). The flow stress of Mo–3 vol.%Al2O3 alloys could be well predicted by those three constitutive models, but modified Arrhenius constitutive model had a higher predicated accuracy.<h3 class="a-plus-plus">Graphic </h3>The hot deformation behavior, mechanism associated with microstructure evolution of Mo–3 vol.% Al2O3 alloys has been investigated by EBSD analysis. Three types of stress–strain curves were analyzed by quantifying the work hardening rate. The deformation mechanism at 1000–1300 °C mainly included the plastic deformation of Mo–3 vol.% Al2O3 alloy, as well as the dynamic recovery and recrystallization of Mo matrix. Moreover, modified Arrhenius constitutive model had a higher predicated accuracy for Mo–3 vol.% Al2O3 alloys than modified JC and modified ZA constitutive models.

Hot compression behaviors and microstructural evolution of Mo-42 wt%Re alloy

Mechanical and microstructural responses in molybdenum-rhenium alloys under hot compressions

Understanding the hot deformation behavior of Mo 42Re alloy: Insights from strain rate sensitivity, microstructure, and misorientation

Hot Deformation Behaviors and Microstructural Evolution of Mo-42Re Alloy Prepared by Electron Beam Melting

Deformation mechanism diagram and deformation instability of a Mo–Re alloy during the hot compression

Microstructural evolutions of molybdenum‐rhenium (47.5 wt.%) alloy under room and high temperature compressions

Tensile behavior and microstructure evolution of Mo-14 %Re alloy at room temperature and elevated temperatures

Hot compression behaviors and microstructural evolution of Be-38wt.%6061Al

High Temperature Compression Tests of Molybdenum-Rhenium Alloys and Constitutive Model Establishment with Internal State Variables

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Microstructure Evolution of a Ti–Al–Sn–Zr Based Alloy During the Hot Compression Deformation

Hot Compression Mechanism and Comparative Study on Constitutive Models of Mo–3 vol%Al2O3 Alloys

Hot Compressive Deformation Behavior And Microstructure Evolution Of Ti-6al-2zr-1mo-1valloy At 1073 K

Hot compression behaviors and microstructural evolution of casting Be-38wt.%Al

Microstructure and Room Temperature Tensile Properties of Rolled Mo-14％Re Alloy

The Deformation Behavior and Microstructure Evolution of a Mn- and Cr-Containing Al-Mg-Si-Cu Alloy During Hot Compression and Subsequent Heat Treatment

High temperature deformation mechanism and microstructural evolution of relatively lightweight AlCoCrFeNi high entropy alloy

Characteristics of hot compression behavior of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy with an equiaxed microstructure

Deformation Behavior and Microstructural Evolution of Inconel 625 Superalloy during the Hot Compression Process

The Dislocation Sub-Structure Evolution During Hot Compressive Deformation of Ti-6Al-2Zr-1Mo-1V Alloy at 800 °C

Revealing the deformation behavior and microstructure evolution in Mg-12Y–1Al alloy during hot compression