Dynamic microstructural evolution of Al-Cu-Li alloys during hot deformation

Ya Tang,Daihong Xiao,Lanping Huang,Renxuan You,Xinyue Zhao,Nan Lin,Yunzhu Ma,Wensheng Liu

DOI: https://doi.org/10.1016/j.matchar.2022.112135

IF: 4.537

2022-09-01

Materials Characterization

Abstract:In this work, we investigated the evolution of deformation microstructures and multiscale phases of Al-Cu-Li alloy under different temperatures and strain rates. The results clearly show that the compress temperature affects the characteristic and dynamic deformation behaviors of secondary phases in Al-Cu-Li alloy during the hot deformation process. The fragmentation and dissolution occur on initial coarse Al2CuLi(T1) phases through the shear defromation of T1 phase at 340 °C and 420 °C. Dislocations and low angle grain boundaries (LAGBs) produced by the compressive deformation can provide a large number of sites for the heterogeneous nucleation of secondary T1 phase precipitates. We observed that the secondary T1 precipitates form a multistage band structure, composed of several fine and thick T1 phase precipitates arranged in parallel with a certain angle. Under the deformation temperature of 420 °C, the strain rates can accelerate the formation of T1 precipitates which exhibit diversified morphologies. However, the T1 precipitates dissolve into the matrix absolutely when the deformation temperature reaches 500 °C. The proper strain rates (0.01–1 s−1) can promote the precipitations and the growth of multistage banded T1 phase. Moreover, the β'(Al3Zr) and Al20Cu2Mn3 phases in the alloy are stable during the thermal deformation process.

materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing