Abstract:AbstractAccurate modeling of fractured reservoirs is very challenging due to the various scales of fractures. The fracture networks may be too complex to be represented using the equivalent continuum model (ECM) or dual porosity-dual permeability (DPDK) model, yet too computational costly to be modeled using the discrete fracture (DFM) or embedded discrete fracture (EDFM) models. This paper proposes a hybrid model that integrates ECM, DPDK, and an integrally embedded discrete fracture model (IEDFM) to account for multi-scale fractures. The hybrid model is applied to investigate the coupled geomechanics-fluid flow process in fractured reservoirs.In the hybrid model, small-scale fractures are upscaled into effective matrix permeability tensor using ECM, medium-scale fractures are considered as an individual continuum using DPDK, and large-scale fractures are explicitly represented using IEDFM. The multiphase flow in effective matrix and fracture continua is modeled using the multi-point flux approximation (MPFA), and fluid exchanges between the anisotropic continua and the large-scale fracture control volumes are precisely calculated using the IEDFM. Empirical models are used to calculate the displacement of natural fractures, and analytical models are used to calculate the aperture changes of hydraulic fractures. The overall deformation of a fractured rock is described using an equivalent method. The coupled geomechanics-fluid flow system is discretized by the finite element-finite volume method (FV-FEM) and solved using the fixed-stress split iterative coupling approach.Several examples are presented to demonstrate the applicability of the proposed method. The hybrid model is first employed to simulate water flooding process in a naturally fractured reservoir with multi-scale fractures. Effects of different scales of fractures, geomechanics coupling and capillary pressure are investigated. A case of producing from horizontal well in a hydraulic fractured tight oil reservoir is then studied, where the hydraulic fractures are modeled explicitly using IEDFM and the stimulation areas around hydraulic fractures are modeled using DPDK. Effects of stimulation area size on the pressure depletion and on the stress evolution process in the reservoir are investigated.

Modeling of hydraulic fracturing in viscoelastic formations with the fractional Maxwell model

Numerical Modeling of Proppant Embedment in Viscoelastic Formations with the Fractional Maxwell Model

Fractional Viscoelastic Models with Non-Singular Kernels

Unexpected viscoelastic deformation of tight sandstone: Insights and predictions from the fractional Maxwell model

A New Approach to the Modeling of Hydraulic-Fracturing Treatments in Naturally Fractured Reservoirs

Fractional model for simulating Long-Term fracture conductivity decay of shale gas and its influences on the well production

A framework to model the hydraulic fracturing with thermo-hydro-mechanical coupling based on the variational phase-field approach

Simulating two-phase flow and geomechanical deformation in fractured karst reservoirs based on a coupled hydro-mechanical model

An Integrated quantitative modeling approach for fault-related fractures in tight sandstone reservoirs

A Model for Hydraulic Fracture Growth Across Multiple Elastic Layers

Numerical Modeling of Fracture Height Propagation in Multilayer Formations Considering the Plastic Zone and Induced Stress.

Coupled Geomechanics and Fluid Flow Modeling for Petroleum Reservoirs Accounting for Multi-Scale Fractures

Integrated Simulation of Multi-Stage Hydraulic Fracturing in Unconventional Reservoirs

DEM Modeling of Simultaneous Propagation of Multiple Hydraulic Fractures Across Different Regimes, from Toughness- to Viscosity-Dominated

Modeling Injection-Induced Fracture Propagation in Crystalline Rocks by a Fluid–Solid Coupling Grain-Based Model

An XFEM-based CZM Numerical Strategy for Modeling Hydraulic Fracture Propagation under Different Fracturing Schemes

Modelling of hydro-mechanical coupling and transport in densely fractured rock mass

Coupled thermo-hydro-mechanical-chemical modeling on acid fracturing in carbonatite geothermal reservoirs containing a heterogeneous fracture

Dynamic fracture investigation of concrete by a rate-dependent explicit phase field model integrating viscoelasticity and micro-viscosity

Influence of rock heterogeneity on hydraulic fracturing: A parametric study using the combined finite-discrete element method

An embedded fracture modeling framework for simulation of hydraulic fracturing and shear stimulation