Abstract:Due to its multi-principal component characteristics, high-entropy alloys exhibit excellent comprehensive mechanical properties and become a new generation of engineering structure alternative materials. At present, a single constitutive model is used to describe the change of flow stress in the study of hot deformation behavior of high-entropy alloys, and there are some problems such as inaccurate prediction accuracy or inapplicability of the model in some hot processing intervals. In this paper, three different constitutive models are combined to fully consider the applicability of the model in different temperature ranges, and the change of flow stress behavior is accurately described, which is of great significance for subsequent deformation mechanism research, hot processing process optimization, numerical simulation and so on. Thermal compression experiments on cast Ni 28.5 Co 18.6 Fe 18.2 Al 16.3 Cr 10.5 Mo 4 Ti 2.3 Nb 0.6 W 0.9 C 0.2 high-entropy alloy were carried out using a Gleeble-3800 thermal simulation tester with deformation temperatures in the range from 900 °C to 1150 °C and strain rates from 0.001 s -1 to 1 s -1 . The constitutive relationships between true stress and strain, temperature and strain rate were established, while the heat deformation process of this alloy under different deformation conditions by Arrhennius, Modified Johnson-Cook and Modified Fields-Backofen models were characterized. The results indicate that Arrenius model describe the rheological behavior of the alloy better in a wider temperature range and at a wider strain rate range. Comparatively, the model shows the highest prediction accuracy in the high-temperature region and slightly lower accuracy in the mesothermal and low-temperature regions. The modified J-C and F-B models have better prediction accuracy in the low-temperature and medium-temperature regions, respectively. Due to the different deformation conditions, dislocation configurations such as dislocation tangles, dislocation networks, and subcrystalline junctions can be observed in the plastic deformation region. The dislocation density of this alloy increases with increasing strain rate and decreasing deformation temperature after deformation.

The Use of Hard and Soft Sphere Models for the Evaluation of Lattice Distortion in B2 High-Entropy Shape Memory Alloys

Hard-sphere model of the B2 to B19' phase transformation, and its application to predict the B19' structure in NiTi alloys and the B19 structures in other binary alloys

Hard-sphere model of the B2 → B19’ phase transformation, and its application to predict the B19’ structure in NiTi alloys and the B19 structures in other binary alloys

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

A role of atomic size misfit in lattice distortion and solid solution strengthening of TiNbHfTaZr high entropy alloy system

Correlation of microdistortions with misfit volumes in High Entropy Alloys

Local Lattice Distortion in High-Entropy Alloys

Lattice‐Distortion‐Enhanced Yield Strength in a Refractory High‐Entropy Alloy

Local Lattice Distortions, Phase Stability, and Mechanical Properties of NbMoTaWHfx Alloys: A Combined Theoretical and Experimental Study

Mechanical Properties of the Al3(TiTaZrNbHf) High Entropy Intermetallic Compound: A Molecular Dynamic Study

Elastic stability and lattice distortion of refractory high entropy alloys

Lattice Distortion in a Strong and Ductile Refractory High-Entropy Alloy

A dislocation mechanics-based crystallographic model of a B2-type intermetallic alloy

Uncovering heterogeneity of local lattice distortion in TiZrHfNbTa refractory high entropy alloy by SR-XRD and EXAFS

Different Lattice Distortion Effects on the Tensile Properties of Ni-W Dilute Solutions and CrFeNi and CoCrFeMnNi Concentrated Solutions

Charge transfer effect on local lattice distortion in a HfNbTiZr high entropy alloy

Chemical complexity-changed deformation behavior of NiTi-based B2 low- to high-entropy intermetallic compounds: Atomistic simulations

Study on thermal deformation constitutive model of NiCoFeAlCrMo high-entropy alloy with FCC / L12 coherent structure

A micromechanical constitutive model of high-temperature shape memory alloys

A comparative study of the amorphization of NiTi-B2 structure by anti-site defects

Local lattice distortions, phase stability, and mechanical properties of NbMoTaWHf x alloys: A combined theoretical and experimental study