Abstract:The polyimide film on the ultra-high voltage equipment may be exposed to plasma during operation, and the flashover characteristics may be affected by complex charging conditions along the surface. In order to evaluate the insulation state of polyimide film, the flashover characteristics of polyimide before and after plasma treatment under DC high voltage condition were studied in this paper. First, low temperature plasma was generated by dielectric barrier discharge (DBD) in argon to treat polyimide films, and then four groups of film samples were obtained by changing the treatment time (Os, 30s, 60s, 90s). And then, the samples were observed and compared based on Scanning Electron Microscope and Fourier Transform Infrared spectroscopy; moreover, the surface potential decay property, surface conductivity and DC surface flashover voltage were also measured and analyzed. The experiment reported that with the increase of plasma treatment time, the surface roughness of polyimide increases, and the functional groups are introduced in on the surface; the surface conductivity of the sample increases, and the trap density decreases; the flashover voltage increases. At last, analysis was conducted based on SEEA model and ETPR model. On the one hand, plasma treatment improves the roughness of PI film, inhibits the initial and development process of secondary electron emission, and improves the flashover voltage. On the other hand, with the increase of processing time, the trap density decreases, which cause the increase of surface conductivity. Therefore, it is hard to form the electron and hole trap centers, which is the establishment of dielectric polarization. Thus, the flashover voltage increases. The experimental results provide a set of methods for evaluating the surface flashover characteristics of polyimide under plasma exposure.

Kinetic Features of Plasma-Chemical Modification of Polyvinylidene Fluoride in Plasma

Effect of Non‐Thermal Sulfur Hexafluoride Cold Plasma Modification on Surface Properties of Polyoxymethylene

Mechanisms Influencing the Formation of the Carbonized Layer Relief on the Polymer Surface after the Ion-Plasma Treatment Modeling

Investigation of the Impact of Cold Plasma Treatment on the Wettability of Medical Grade Polyvinylchloride

Effect of Nanoparticles Plasma Treatment on Corona Resistance of Polyimide Composite Films

Study of electroless copper plating onto PVDF modified by radio frequency plasma treatment

Study of thermally poled and corona charged poly(vinylidene fluoride) films

Surface Modification of Polyimide Films Using Unipolar Nanosecond-Pulse DBD in Atmospheric Air

Growth and Characterization of Fluorocarbon Thin Films from Low Pressure Tetrafluoromethane, Hexafluoroethane and Octafluorocyclobutane Plasmas

Surface Modification of Poly (vinyl Chloride) by Long-Distance and Direct Argon RF Plasma

Study on the surface modification of polymer films by plasma

Modification of surface properties of polypropylene (PP) film using DC glow discharge air plasma

Particle Surface Modification in the Near-Electrode Region of an RF Discharge

Surface Modification of Polyvinylidene Fluoride （PVDF） Membranes by Low-Temperature Plasma with Grafting Styrene

Low-temperature plasma modification of polyvinylidene fluoride (PVDF) membrane by graft of styrene in gas

Competitive and synergistic effects between excimer VUV radiation and O radicals on the etching mechanisms of polyethylene and fluoropolymer surfaces treated by atmospheric He-O$_2$ post-discharge

Effect of Plasma Modification on Dielectric Properties of Polyimide Nanocomposite Films

Influence of Low Temperature Plasma Treatment on Surface Insulation Performance of Polyimide Film

CHANGES IN SURFACE PROPERTIES OF POLY (ETHYLENE TEREPHTHALATE) TREATED WITH LOW TEMPERATURE PLASMA: EFFECT OF PRETREATMENT WITH DIMETHYLFORMAMIDE

Enhanced Surface Flashover Strength in Vacuum of Polymethylmethacrylate by Surface Modification Using Atmospheric-Pressure Dielectric Barrier Discharge

Effect of Dielectric Barrier Discharge (DBD) Treatment on the Dielectric Properties of Poly(vinylidene Fluoride)(pvdf)-Based Copolymer.