Abstract:The polyimide film on the ultra-high voltage equipment may be exposed to plasma during operation, and the flashover characteristics may be affected by complex charging conditions along the surface. In order to evaluate the insulation state of polyimide film, the flashover characteristics of polyimide before and after plasma treatment under DC high voltage condition were studied in this paper. First, low temperature plasma was generated by dielectric barrier discharge (DBD) in argon to treat polyimide films, and then four groups of film samples were obtained by changing the treatment time (Os, 30s, 60s, 90s). And then, the samples were observed and compared based on Scanning Electron Microscope and Fourier Transform Infrared spectroscopy; moreover, the surface potential decay property, surface conductivity and DC surface flashover voltage were also measured and analyzed. The experiment reported that with the increase of plasma treatment time, the surface roughness of polyimide increases, and the functional groups are introduced in on the surface; the surface conductivity of the sample increases, and the trap density decreases; the flashover voltage increases. At last, analysis was conducted based on SEEA model and ETPR model. On the one hand, plasma treatment improves the roughness of PI film, inhibits the initial and development process of secondary electron emission, and improves the flashover voltage. On the other hand, with the increase of processing time, the trap density decreases, which cause the increase of surface conductivity. Therefore, it is hard to form the electron and hole trap centers, which is the establishment of dielectric polarization. Thus, the flashover voltage increases. The experimental results provide a set of methods for evaluating the surface flashover characteristics of polyimide under plasma exposure.

Investigation of the Impact of Cold Plasma Treatment on the Wettability of Medical Grade Polyvinylchloride

Dielectric barrier discharge plasma treatment of ultrahigh molecular weight polyethylene in different discharge atmospheres at medium pressure: A cell-biomaterial interface study

Treatment of Polymeric Films Used for Printed Electronic Circuits Using Ambient Air DBD Non-Thermal Plasma

Surface Treatment of PET and PP by Atmospheric Pressure Dielectric Barrier Discharge for Improvement in Hydrophilicity

The stability of radio-frequency plasma-treated polydimethylsiloxane surfaces

Study on Hydrophilicity of Polymer Surfaces Improved by Plasma Treatment

Atmospheric Pressure Plasma Jet Exposure of Polylactic Acid Surfaces for Better Adhesion: Plasma Parameters towards Polymer Properties

Investigation of Cold Atmospheric Plasma Treatment in Polydimethylsiloxane Microfluidic Devices with a Transmural Method

Hydrophilization of liquid surfaces by plasma treatment

Applicability of Electron-Beam and Hybrid Plasmas for Polyethylene Terephthalate Processing to Obtain Hydrophilic and Biocompatible Surfaces

Plasma functionalization of poly(vinyl alcohol) hydrogel for cell adhesion enhancement

Phenomenological Model of Wetting Charged Dielectric Surfaces and its Testing with Plasma-Treated Polymer Films and Inflatable Balloons

Molecular and Energetic Descriptions of the Plasma Protein Adsorption onto the PVC Surface: Implications for Biocompatibility in Medical Devices

The interplay of plasma treatment and gold coating and ultra-high molecular weight polyethylene: On the cytocompatibility

Effect of Plasma on Hydrophobicity Migration of Contaminated HTV Silicone Rubber

Effect of Dielectric Barrier Discharge Plasma on the Attachment and Proliferation of Osteoblasts Cultured over Poly(ε‐caprolactone) Scaffolds

Modification of poly(L-lactide) and polycaprolactone bioresorbable polymeric materials by RF plasma discharge: a preliminary study evaluating EA-hy 926 cell attachment

Influence of Low Temperature Plasma Treatment on Surface Insulation Performance of Polyimide Film

Comparative Studies on Hydrophilic and Hydrophobic Segments Grafted Poly(vinyl chloride)

Experimental Study of Accelerating Surface Charge Dissipation on Polymer Treated by Repetitively Pulsed Discharge Plasmas

Effect of Low-Temperature Plasma Treatment on Surface Modification of Polycaprolactone Pellets and Thermal Properties of Extruded Filaments