Abstract:A simple method for estimating the ultimate strength of rectangular plates under combined biaxial and shear loads is proposed. Although numerous studies have been conducted to predict the ultimate strength of plates, most conventional methods rely on empirical approaches that involve plastic correction of the elastic buckling strength or curve fitting through nonlinear finite element analysis (NLFEA) or experimental test results. For a more rational design of hull structures, it is important to develop an estimation method with a more theoretical basis corresponding to physical phenomena, such as post-buckling and yielding behavior, the effects of initial imperfections and material properties as well as the elastic buckling strength. Although some methods with the more theoretical basis were developed in previous studies, they often require numerical iterations such as the Newton-Raphson method to obtain load-deflection relationships. Our approach entails a thorough observation of the buckling and collapse behavior obtained from a series of NLFEA calculations, rather than merely investigating the magnitude of the ultimate strength derived from NLFEA. By applying the elastic-large deflection theory and considering the identified buckling modes, analytical solutions that describe the elastic post-buckling behaviors are derived. The ultimate strength is predicted by assessing the yield at pre-defined locations corresponding to the classified collapse modes. The proposed semi-analytical method eliminates the need for numerical iterative methods to obtain load-deflection relationships and provides a simple estimation of the ultimate strength. The accuracy of the proposed method is validated through a comparison with NLFEA results.

COMPRESSIVE ULTIMATE STRENGTH OF RECTANGULAR PLATE WITH INITIAL IMPERFECTIONS DUE TO WELDING, 4TH REPORT: PREDICTION METHODS FOR INITIAL IMPERFECTION, EFFECTIVE COEFFICIENT OF INITIAL DEFLECTION AND COMPRESSIVE ULTIMATE STRENGTH

A Simple Empirical Formula for Predicting the Ultimate Strength of Ship Plates with Elastically Restrained Edges in Axial Compression

An Empirical Formulation for Predicting the Dynamic Ultimate Strength of Rectangular Plates under In-Plane Compressive Loading

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Dynamic Ultimate Compressive Strength of Simply Supported Rectangular Plates under Impact Loading

Dynamic Ultimate Strength of Outer Bottom Stiffened Plates under In-Plane Compression and Lateral Pressure

Experimental Compressive Assessment of Different Stiffened Plate Welding Configurations

Assessment of Residual Ultimate Strength of Cracked Plates under Biaxial Compression

Effect of initial geometric imperfections on dynamic ultimate strength of stiffened plate under axial compression for ship structures

Lateral pressure effect on the ultimate strength of the stiffened plate subjected to combined loads

Simplified ultimate strength estimation method of rectangular plates under combined loads

Parametric study of buckling and post-buckling behavior for an aluminum hull structure of a high-aspect-ratio twin hull vessel

Progressive Collapse Response and Ultimate Strength Evaluation of Stiffened Plates with Welding Residual Stress under Combined Biaxial Cyclic Loads and Lateral Pressure

Research development of buckling and ultimate strength of hull plate and stiffened panel

ULTIMATE STRENGTH ANALYSIS OF STIFFENED LAMINATED PLATES

Experimental and numerical study of residual ultimate strength of hull plate subjected to coupled damage of pitting corrosion and crack

The Dynamic Ultimate Strength of Stiffened Panels under Axial Impact Loading

A Parametric Study on Effects of Pitting Corrosion on Steel Plate's Ultimate Strength

Experimental and numerical analysis of ultimate compressive strength of stiffened panel with openings

Ultimate Longitudinal Strength of Composite Ship Hulls

METHOD AND FINITE ELEMENT ANALYSIS FOR THE COMPRESSION INSTABILITY ULTIMATE LOAD OF A Z-SHAPED STIFFENED-WELED PLATE