Abstract:Biomass residues are crucial feedstocks for facing climate change challenges due to high-value products, such as producing activated carbons (AC) for carbon capture. Two stages of pyrolysis followed by activation at high temperatures are the most used technique for converting lignocellulosic precursors into porous activated carbons. This process has shown to offer the highest surface areas; however, a two-stage process is undesirable as is an energy-intensive processes. Product characteristics are affected by feedstock and reaction rate conditions. In the present study pine wood (PW), olive stones (OS) and pecan nutshells (NS) were evaluated as feedstocks in the production of AC for selective post-combustion CO 2 capture via a single-step pyrolysis-activation using microwave heating. Direct raw biomass impregnation was completed using potassium hydroxide (KOH). The ACs were synthesised in 8 min using 300 W of microwave power with 8.8 GJ t −1 specific microwave energy input. Samples exhibited large specific surface areas (S BET ), up to 1340 m 2 g −1 , with 70 % of ultra-micropores (<0.8 nm), fundamental for high CO 2 adsorption capacity. Among the tested biomasses, PW was the best performing and physicochemical characterisation and CO 2 capture studies indicated that PW-based AC has 79 % carbon, amorphous structure, and possessed larger ultra-micropores that resulted in high CO 2 /N 2 selectivity (12.5), and one of the largest CO 2 uptakes for ACs (6.2 and 4.2 mmol/g at 0 and 25 °C, respectively). The CO 2 performance was investigated across a range of temperatures up to 100 °C, while cyclic regenerative performance was confirmed after 15 adsorption–desorption cycles. This study highlights the development of AC from different lignocellulosic resources by a fast and low-energy single microwave-pyrolysis activation process that can produce ultra-microporous structures implemented in post-combustion CO 2 capture.

From Green to Black Gold: Highly Microporous Carbons from Pistachio Shells by a Controlled Physical Activation Process

Single-step preparation of activated carbons from pine wood, olive stones and nutshells by KOH and microwaves: Influence of ultra-microporous for high CO 2 capture

Production of Porous Carbon by the Synergistic Chemical and Physical Activations and its Capacitive Performance

One-pot Synthesis of Biomass-derived Porous Carbons for Multipurpose Energy Applications

Systematic study of dynamic CO2 adsorption on activated carbons derived from different biomass

Pistachio Shell-Derived Carbon Activated with Phosphoric Acid: A More Efficient Procedure to Improve the Performance of Li-S Batteries

Biomass-Based Fuels and Activated Carbon Electrode Materials: An Integrated Approach to Green Energy Systems

Almond Skin Derived Porous Biocarbon Nanoarchitectonics with Tunable Micro and Mesoporosity for CO 2 Adsorption and Supercapacitors

Enhancing graphitization and mesoporosity by cobalt in activated carbons obtained from peach stone

Enhancing carbon dioxide uptake in biochar derived from husk biomasses: Optimizing biomass particle size and steam activation conditions

Pistachio Waste-Derived Activated Carbon Materials for Sustainable Energy Storage: Supercapacitor Applications

A Direct Synthesis of Mesoporous Carbons with Bicontinuous Pore Morphology from Crude Plant Material by Hydrothermal Carbonization

Beyond Conventional Carbon Activation.Creating Porosity Without Etching Using Cesium Effect

Production of palm kernel shell-based activated carbon by direct physical activation for carbon dioxide adsorption

Synthesis and Characterization of Bio-Based Porous Carbons by Two Step Physical Activation with CO2

Synthesis and characterization of advanced bio-carbon materials from Kraft lignin with enhanced CO2 capture properties

Promoting the circular economy: Valorization of a residue from industrial char to activated carbon with potential environmental applications as adsorbents

Preparation and TG/DTG, FT-IR, SEM, BET Surface Area, Iodine Number and Methylene Blue Number Analysis of Activated Carbon from Pistachio Shells by Chemical Activation

Solving two environmental problems simultaneously:Microporous carbon derived from mixed plastic waste for CO 2 capture

Nitrogen-doped Carbon with Modulated Surface Chemistry and Porous Structure by a Stepwise Biomass Activation Process towards Enhanced Electrochemical Lithium-Ion Storage

Sustainable production of porous carbon from biomass: Influence of pre-carbonization on pore evolution and environment impact