Abstract:Polyurethane and polyurea-based adhesives are widely used in various applications, from automotive to electronics to medical. The adhesive performance depends strongly on its composition, and developing the formulation-structure-property relationship is crucial to making better products. Here, we investigate the dependence of the linear viscoelastic properties of polyurea nanocomposites, with IPDI-based polyurea (PUa) matrix and exfoliated graphene nanoplatelet (xGnP) fillers, on the hard segment weight fraction (HSWF) and the xGnP loading. We characterize the material using scanning electron microscopy (SEM) and dynamical mechanical analysis (DMA). It is found that changing HSWF leads to a significant variation in the stiffness of the material, from about 10 MPa for the 20% HSWF to about 100 MPa for the 30% HSWF to about 250 MPa for the 40% HSWF polymer (as measured by the tensile storage modulus at room temperature). The effect of the xGNP loading is significantly more limited and is generally within experimental error, except for the 20% HSWF material where the xGNP addition leads to about 80% increase in stiffness. To correctly interpret the DMA results, we developed a new physics-based rheological model for the description of the storage and loss moduli. The model is based on the fractional calculus approach and successfully describes the material rheology in a broad range of temperatures (-70°C to +70°C) and frequencies (0.1 to 100 s-1), using only six physically meaningful fitting parameters for each material. The results provide guidance for the development of nanocomposite PUa-based materials.

Influence of an Ultralow Graphene Content on the Physical and Mechanical Characteristics of UHMWPE-Based Composites

Polymer chain conformations in hybrid composites of UHMWPE incorporated by GNP/MWCNT

Effect of the Graphene Derived from Thermal Reduction Within Matrix on the Performance of Graphene/poly (methyl Methacrylate) Composites

Compressive Failure of Polymer Composites Based on Graphene-Coated Particles

Effects of graphene oxide and graphene spatial orientation on tribological properties of UHMWPE composites

The Structure and Mechanical Properties of the UHMWPE Films Modified by the Mixture of Graphene Nanoplates with Polyaniline

Polyurea-Graphene Nanocomposites -- the Influence of Hard-Segment Content and Nanoparticle Loading on Mechanical Properties

Graphene/polyethylene nanocomposites: Effect of polyethylene functionalization and blending methods

Influence of Graphene Nano Fillers and Carbon Nano Tubes on the Mechanical and Thermal Properties of Hollow Glass Microsphere Epoxy Composites

Mechanical Behavior of Melt-Mixed 3D Hierarchical Graphene/Polypropylene Nanocomposites

Crystallization and Melting Behavior of UHMWPE Composites Filled by Different Carbon Materials

Synthesis and Tribological Performance Study of Ultrahigh Molecular Weight Polyethylene Composites Reinforced with Graphene Oxide

Mechanical Performance of Graphene/polymethyl-Methacrylate Nano-Composites under Tension Loads: A Coarse-Grained Molecular Dynamic Simulation

Tensile Properties of Graphene Nano-Platelets Reinforced Polypropylene Composites

Composites of Ultrahigh-Molecular-Weight Polyethylene with Graphene Sheets And/Or Mwcnts with Segregated Network Structure: Preparation and Properties

Molecular dynamics simulation of tension of polymer composites reinforced with graphene and graphene oxide

Effect of graphene nanoplatelet filling on mechanical properties of natural fiber reinforced polymer composites

Enhanced thermal and mechanical properties of poly (vinylidene fluoride) nanocomposites reinforced by liquid-exfoliated graphene

Mechanical Characterization of Graphene-Hexagonal Boron Nitride-Based Kevlar-Carbon Hybrid Fabric Nanocomposites

Study on Preparation and Properties of Ultrahigh Molecular Weight Polyethylene Composites Filled with Different Carbon Materials

Effect of Graphene on the Mechanical Properties of Recycled High-Density and High-Molecular-Weight Polyethylene Blends