Abstract:A stochastic model for predicting the evolutions of wear profile and surface height probability density function (PDF) of initial line contacts during running-in under mixed lubrication condition is presented. A numerical approach was developed on the basis of stochastic solution of mixed lubrication, which combined the Patir and Cheng's average flow model for calculation of the hydrodynamic pressure and the Kogut and Etsion's (KE) rough surface contact model for calculation of the asperity contact pressure. The total friction force was assumed to be the sum of the boundary friction at the contact asperities and the integration of viscous shear stress in the hydrodynamic region. The wear depth on the contact region was estimated according to the modified Archard' s wear model using the asperity contact pressure. Sugimura' s wear model was modified and used to link the wear particle size distribution and the variation of surface height PDF during wear. In the wear process, the variations of profile and surface height PDF of initial line contacts were calculated step by step in time, and the pressure distribution, friction coefficient, and wear rate were updated consequently. The effect of size distribution of wear particles on the wear process was numerically investigated, and the simulation results showed that the lubrication condition in which small wear particles are generated from the asperity contact region is beneficial to reduce friction coefficient and wear rate, and leads to a better steady mixed lubrication condition.

A new efficient flow continuity lubrication model for the cylinder liner‐piston ring based on the locally oriented roughness

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

A Mixed Lubrication Model with Consideration of Starvation and Interasperity Cavitations

The Influence of Roughness Distribution Characteristic on the Lubrication Performance of Textured Cylinder Liners

Simplified Wear Model for Power Cylinder under Engine Operating Conditions

Lubrication Adaptability to the Variations of Combustion Modes by Texturing Cylinder Liner in Engines

Calculated Journal Bearing Lubrication of Non-Newtonian Medium with Surface Roughness Effects

Mutual influence of plateau roughness and groove texture of honed surface on frictional performance of piston ring–liner system

Discussion on the Reynolds Equation for the Slipper Bearing Modeling in Axial Piston Pumps

Coupled evolution process of lubrication and wear in piston-liner interface of high-pressure common rail pumps

Modelling for Water-Based Liquid Lubrication with Ultra-Low Friction Coefficient in Rough Surface Point Contact

A Study of Misaligned Compliant Journal Bearings Lubricated by Non-Newtonian Fluid Considering Surface Roughness

Direct Observation of Cavitation Phenomenon and Hydrodynamic Lubrication Analysis of Textured Surfaces

Evaluating the contact model for anisotropic non-Gaussian roughness in mixed lubrication regime

New Turbulent Lubrication Model in Hydrodynamic Face Seal

Numerical Prediction of Surface Wear and Roughness Parameters During Running-In for Line Contacts under Mixed Lubrication

Coupled nonlinear effects of random surface roughness and rarefaction on slip flow in ultra-thin film gas bearing lubrication

Lubrication performance analysis of sealing structures in rodless open cylinders

Numerical Simulation of Piston Ring in Mixed Lubrication—A Nonaxisymmetrical Analysis

Simulation and experimental investigation on low wear rate surface contour of piston/cylinder pair in an axial piston pump

A Model of Contact Deep Groove Seals Based on Partition Model and JFO Boundary Condition