Abstract:High-performance phosphate adsorbents integrated with the advantages of excellent adsorption performance, low cost, strong adaptability, and environmental friendliness have always been desirable, because the existing rare earth-free adsorbents were confined to poor adsorption ability and the rare earth-based adsorbents were confined to high cost and waste of rare earth resources. Here, in line with the concept of “from nature, for purifying nature”, a novel cost-effective and robust phosphate adsorbent was synthesized from natural calcium-rich clay (a very abundant and inexpensive raw material) by coupling the hydrothermal reaction with a simple pyrolysis process. The natural calcium-rich clay was firstly reacted with sodium silicate to form silicate precursor, which was then calcined to obtain superadsorbent with a number of available sites for capturing phosphates. The experimental adsorption capacity of the superadsorbent for phosphate is as high as 372.57 mg/g, which is 24.27 times that of raw clay, and is obviously superior to most other adsorbents. A satisfactory adsorption capacity was still attained in a broad pH range of 4 ∼ 12. After adsorption with 3 g/L of the superadsorbent, 99.99% of the phosphate in the initial phosphate solution (200 mg/L) was removed. After adsorption with 4 g/L of the adsorbent, the phosphate in natural water (e.g., Yellow river water, seawater, Yangtze river water, and Tap water) can be almost completely removed, and the total P concentration in the actual phosphate solution can be reduced to below 0.01 mg/L, which is significantly better than the commercially available phosphorus adsorbents. The in-depth structural analysis of the adsorbent after adsorption revealed that the adsorption of phosphate on the superadsorbent was mainly driven by chemical complexation interactions.

Phosphorus adsorption from aqueous solutions using different types of cement: kinetics, isotherms, and mechanisms

Alkali-Treated Yttrium-Containing Chitosan-Based Hydrogel Beads for Phosphate Removal from Aqueous Solutions

Multipurpose Polysaccharide-based composite hydrogel with magnetic and thermoresponsive properties for phosphorus and enhanced copper (II) removal

Zirconium-modified biochar as the efficient adsorbent for low-concentration phosphate: performance and mechanism

Studies On The Phosphorus Sorption Capacity Of Substrates Used In Constructed Wetland Systems

Facile Fabrication of Calcium-Doped Carbon for Efficient Phosphorus Adsorption

Effect of cement-based composite pellets on phosphorus removal and microbial community structure in eutrophic water

A novel lanthanum carbonate for low-level phosphorus removal: Adsorption performance and mechanism

Phosphorus Binding by Lanthanum Modified Pyroaurite-like Clay: Performance and Mechanisms

Efficient adsorption of phosphorus by macroscopic MOF/chitosan composites and preliminary investigation of subsequent phosphorus recovery through electrochemically-driven struvite precipitation

Cost-effective and eco-friendly superadsorbent derived from natural calcium-rich clay for ultra-efficient phosphate removal in diverse waters

Evaluation of flue gas desulfurization gypsum as a low-cost precipitant for phosphorus removal from anaerobic digestion effluent filtrate

Phosphorus Removal from Wastewater Using Electric Arc Furnace Slag Aggregate

Phosphorus removal from sewage by flocculated foamed lightweight aggregate: Performance optimisation, adsorption kinetics and mechanisms

Influence of phosphogypsum purification with lime on the properties of cementitious matrices with and without plasticizer

Strong Adsorption of Phosphate by Amorphous Lanthanum Carbonate Nano-Adsorbents.

Adsorption performance of phosphate in water by mixed precursor base geopolymers

Fabrication of lanthanum/chitosan co-modified bentonite and phosphorus removal mechanism from low-concentration landscape water

The adsorbent preparation of lanthanum functionalized sponge based on CMC coating for effective phosphorous removal

Synthesis of magnesium-modified ceramsite from iron tailings as efficient adsorbent for phosphorus removal

Phosphorus Adsorption Characteristics of Alum Sludge: Adsorption Capacity and the Forms of Phosphorus Retained in Alum Sludge