Nano-Modified Titanium Implant Materials: A Way Toward Improved Antibacterial Properties

Jianqiao Liu,Jia Liu,Shokouh Attarilar,Chong Wang,Maryam Tamaddon,Chengliang Yang,Kegong Xie,Jinguang Yao,Liqiang Wang,Chaozong Liu,Yujin Tang

DOI: https://doi.org/10.3389/fbioe.2020.576969

IF: 5.7

2020-11-23

Frontiers in Bioengineering and Biotechnology

Abstract:Graphical Abstract

multidisciplinary sciences

What problem does this paper attempt to address?

Zinc- and Strontium- Co-Incorporated Nanorods on Titanium Surfaces with Favorable Material Property, Osteogenesis, and Enhanced Antibacterial Activity.

Yanqi Chen,Chuan Zhou,Yiwen Xie,Antian Xu,Ye Guan,Wei Lu,Xiaoxiang Wang,Fuming He

DOI: https://doi.org/10.1002/jbm.b.34834

2021-01-01

Abstract:Early infection and peri-implantitis after implant restoration are major reasons for dental implant failure. Implant-associated infections are majorly attributed to biofilm formation. In this study, co-incorporated zinc- (Zn-) and strontium- (Sr-) nanorod coating on sandblasted and acid-etched (SLA) titanium (SLA-Zn/Sr) was fabricated by hydrothermal synthesis. It was aimed at promoting osteogenesis while inhibiting biofilm formation. The nanorod-like particles (phi 30-50 nm) were found to be evenly formed on SLA-Zn/Sr (Zn: 1.49 +/- 0.16 wt%; Sr: 21.69 +/- 2.74 wt%) that was composed of well-crystallized ZnTiO3 and SrTiO3 phases. With a sufficient interface bonding strength (42.00 +/- 3.00 MPa), SLA-Zn/Sr enhanced the corrosion resistance property of titanium. Besides, SLA-Zn/Sr promoted the cellular initial adhesion, proliferation and osteogenic differentiation of rBMSCs in vitro while inhibiting the adhesion of Staphylococcus aureus and Porphyromonas gingivalis . In addition, through down-regulating icaA gene expression, this novel surface reduced the secretion of polysaccharide intercellular adhesion (reduced by 87.9% compared to SLActive) to suppress the S. aureus biofilm formation. We, therefore, propose a new chemical modification on titanium for multifunctional implant material development. Due to the Zn/Sr co-doping in coating, material properties, early osteogenic effect and antibacterial ability of titanium can be simultaneously enhanced, which has the potential to be applied in dental implantation in the future.
Fabrication and Biological Evaluation of the Coating Co‐doped Strontium and Zinc Nanoparticles on Porous Pure Titanium Surface by Hydrothermal Method

Yanqi Chen,fuming he

DOI: https://doi.org/10.1111/clr.10_13509

2019-01-01

Clinical Oral Implants Research

Abstract:Background For dental implants, early infection and peri-implantitis after implant restoration are major reasons for implant failure. Plaque biofilm formation is the initiator for implant-related infection. Therefore, it is urgent to develop a new antibacterial implant materials or treatment methods. Aim/Hypothesis In this study, Sr- and Zn- incorporated micro nano-structured titanium surface with nanorods (MNT-Sr Zn) was fabricated by a two-step hydrothermal process, aiming to improve osseointegration and reduce implant failure caused by implant-related infection and broaden new ideas for the future research Material and Methods The Mod Ti surfaces were used as a control. The characterization of different surfaces was detected by a field emission scanning electron microscope (FE-SEM) equipped with energy dispersive spectra (EDS) detector, x-ray diffractometer (XRD) and inductively coupled plasma mass spectroscopy (ICP-MS). Meanwhile, Staphylococcus aureus (S. aureus) was selected to evaluate antibacterial properties through Live Dead Staining and watching the adhesive bacterial morphology under FE-SEM. What's more, rat bone marrow-derived mesenchymal stem cells (rBMSCs) were cultured on the surfaces to detect their early osteogenic properties, like the alkaline phosphatase(ALP) activity and the expressions of osteogenesis related genes. Results The results confirmed that nanorod-like particles with a diameter of about 30-50 nm of MNT-Sr Zn composed of well-crystallized ZnO and SrTiO3 phases. In the EDS spectra, the elements of Zn and Sr were evenly distributed, and approximately 1.49 ± 0.16 wt% and 21.69 ± 2.74 wt% respectively. Besides, the release of Sr2+ and Zn2+ was a controlled and long-term process. More importantly, Zn-containing nanorod-like particles and the morphology could work together, slightly decreasing adhesion of S. aureus but increasing the proportion of dead cells, thus inhibiting subsequent biofilm formation, compared with the controlled group. In addition to this, MNT-Sr Zn could enhance the osteogenic differentiation via the upregulation of the transcription of osteogenic related genes and the expression of ALP in vitro. Conclusion and Clinical Implications This research provides a new surface modification method on titanium substrate for multi-functional implant material development. Due to the co-doping of Sr and Zn in the coating, biomechanical stability, antibacterial capability and early osteogenic inductive effect are enhanced, which has the potential to be applied in dental implantation in the future.
NanoZnO-modified titanium implants for enhanced anti-bacterial activity, osteogenesis and corrosion resistance

Zheng Wang,Xiaojing Wang,Yingruo Wang,Yanli Zhu,Xinqiang Liu,Qihui Zhou

DOI: https://doi.org/10.1186/s12951-021-01099-6

IF: 10.2

2021-10-30

Journal of Nanobiotechnology

Abstract:Abstract Titanium (Ti) implants are widely used in dentistry and orthopedics owing to their excellent corrosion resistance, biocompatibility, and mechanical properties, which have gained increasing attention from the viewpoints of fundamental research and practical applications. Also, numerous studies have been carried out to fine-tune the micro/nanostructures of Ti and/or incorporate chemical elements to improve overall implant performance. Zinc oxide nanoparticles (nano-ZnO) are well-known for their good antibacterial properties and low cytotoxicity along with their ability to synergize with a variety of substances, which have received increasingly widespread attention as biomodification materials for implants. In this review, we summarize recent research progress on nano-ZnO modified Ti-implants. Their preparation methods of nano-ZnO modified Ti-implants are introduced, followed by a further presentation of the antibacterial, osteogenic, and anti-corrosion properties of these implants. Finally, challenges and future opportunities for nano-ZnO modified Ti-implants are proposed. Graphical Abstract

biotechnology & applied microbiology,nanoscience & nanotechnology
Polymeric Nanoarchitectures on Ti-based Implants for Antibacterial Applications.

Long Zhang,Chengyun Ning,Tian Zhou,Xiangmei Liu,K.W. K. Yeung,Tianjin Zhang,Zushun Xu,Xianbao Wang,Shuilin Wu,Paul K. Chu

DOI: https://doi.org/10.1021/am5045604

2014-01-01

Abstract:Because of the excellent mechanical properties and good biocompatibility, titanium-based metals are widely used in hard tissue repair, especially load-bearing orthopedic applications. However, bacterial infection and complication during and after surgery often causes failure of the metallic implants. To endow titanium-based implants with antibacterial properties, surface modification is one of the effective strategies. Possessing the unique organic structure composed of molecular and functional groups resembling those of natural organisms, functionalized polymeric nanoarchitectures enhance not only the antibacterial performance but also other biological functions that are difficult to accomplish on many conventional bioinert metallic implants. In this review, recent advance in functionalized polymeric nanoarchitectures and the associated antimicrobial mechanisms are reviewed.
Fabrication and evaluation of silver modified micro/nano structured titanium implant

Chengyi Huang,Haiyan Wang,Lili Yao,Li Li,Weiwei Lou,Litao Yao,Yitian Shi,Renren Li

DOI: https://doi.org/10.1177/08853282231222590

2024-01-25

Journal of Biomaterials Applications

Abstract:Journal of Biomaterials Applications, Ahead of Print. In order to enhance the antibacterial property of titanium implant without inducing obvious cytotoxicity, the combination of Ag nanolayer and micro/nano surface structure was conducted by magnetron sputtering and hot-alkali treatment in this study. A series of specimens (AH-Ti, AH-Ti/Ag0.25, AH-Ti/Ag1, AH-Ti/Ag2, and AH-Ti/Ag5) were prepared with different sputtering durations (0 min, 0.25 min, 1 min, 2 min, 5 min), respectively, all realizing long-term release of Ag+. In vitro experiments indicated that AH-Ti/Ag1 group possessed good cytocompatibility, nice osteogenic ability, and excellent antibacterial efficiency as well. In addition, AH-Ti/Ag0.25 showed good biocompatibility, while the reduction of S.aureus (78.5%) was not enough compared with AH-Ti/Ag1. Although the AH-Ti/Ag2 and AH-Ti/Ag5 group showed superior antibacterial activity, their obvious cytotoxicity caused low ALP and mineralization level. Therefore, the design of suitable Ag nanolayer coating combined with micro/nano surface structure (AH-Ti/Ag1) might be a promising strategy to enhance osteogenic property and maintain excellent antibacterial ability at the same time.

engineering, biomedical,materials science, biomaterials
Topography-dependent Antibacterial, Osteogenic and Anti-Aging Properties of Pure Titanium

Qiaojie Luo,Ying Huang,Guangyu Zha,Yadong Chen,Xuliang Deng,Kai Zhang,Weipu Zhu,Shifang Zhao,Xiaodong Li

DOI: https://doi.org/10.1039/c4tb01556h

IF: 7.571

2015-01-01

Journal of Materials Chemistry B

Abstract:After nearly half a century of development under the guidance of the osseointegration theory, the major dilemmas for current implant dentistry are the implant associated infection and insufficient osseointegration. Moreover, biological aging of titanium (Ti) implants also brings great uncertainty to clinical results. In the present study, a novel nano-micro-hierarchical topography pattern is created by sandblasting and dual acid-etching on a Ti surface. The physico-chemical properties of the surfaces were characterized by scanning electron microscopy, contact angle measurement, X-ray photoelectron spectroscopy and X-ray diffraction. The effects of the hierarchical surfaces on osteoprogenitor cell growth and bacterial activities were separately evaluated. The optimized nano-micro-hierarchical Ti surface exhibits surprisingly topography-dependent antibacterial capacity via inhibiting bacterial adhesion of several species in the early stage and better osteogenesis ability than the microscaled surface. Aging studies demonstrate that, compared with the surface with a microscale structure, the nano-micro-hierarchical Ti surface has greater anti-aging ability manifested as being more capable to retain hydrophilicity and bioactivity during aging. Furthermore, the present study reveals that the biological aging of the Ti implant is attributed to two decisive factors during the aging period: the progressively thickened amorphous TiO2 layer by autoxidation and the unavoidable accumulation of hydrocarbons on the Ti implant surface.
Multi-scale hybrid modified coatings on titanium implants for non-cytotoxicity and antibacterial properties

Shifeng Liu,Qingge Wang,Wei Liu,Yujin Tang,Jia Liu,Haifeng Zhang,Xuanyong Liu,Jingxian Liu,Junlin Yang,Lai-Chang Zhang,Yan Wang,Jing Xu,Weijie Lu,Liqiang Wang

DOI: https://doi.org/10.1039/d1nr02459k

IF: 6.7

2021-01-01

Nanoscale

Abstract:Titanium and its alloys are among the widely used materials in the biomedical field, but they have poor wear resistance and antibacterial properties

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Enhancing antibacterial properties of titanium implants through a novel Ag-TiO2-OTS nanocomposite coating: a comprehensive study on resist-killing-disintegrate approach

Yu Jiang,Zhou Wan,Qi Liu,Xinxin Li,Bo Jiang,Mudan Guo,Pengjue Fan,Siyi Du,Doudou Xu,Chen Liu

DOI: https://doi.org/10.1080/09205063.2024.2344332

2024-04-25

Journal of Biomaterials Science Polymer Edition

Abstract:Titanium (Ti) implants are widely used in orthopedic and dental applications due to their excellent biocompatibility and mechanical properties. However, bacterial adhesion and subsequent biofilm formation on implant surfaces pose a significant risk of postoperative infections and complications. Conventional surface modifications often lack long-lasting antibacterial efficacy, necessitating the development of novel coatings with enhanced antimicrobial properties. This study aims to develop a novel Ag-TiO 2 -OTS (Silver-Titanium dioxide-Octadecyltrichlorosilane, ATO) nanocomposite coating, through a chemical plating method. By employing a 'resist-killing-disintegrate' approach, the coating is designed to inhibit bacterial adhesion effectively, and facilitate pollutant removal with lasting effects. Characterization of the coatings was performed using spectroscopy, electron microscopy, and contact angle analysis. Antibacterial efficacy, quantitatively evaluated against E. coli and S. aureus over 168 h, showed a significant reduction in bacterial adhesion by 76.6% and 66.5% respectively, and bacterial removal rates were up to 83.8% and 73.3% in comparison to uncoated Ti-base material. Additionally, antibacterial assays indicated that the ratio of the Lifshitz-van der Waals apolar component to electron donor surface energy components significantly influences bacterial adhesion and removal, underscoring a tunable parameter for optimizing antibacterial surfaces. Biocompatibility assessments with the L929 cell line revealed that the ATO coatings exhibited excellent biocompatibility, with minimal cytotoxicity and no significant impact on cell proliferation or apoptosis. The ATO coatings provided a multi-functionality surface that not only resists bacterial colonization but also possesses self-cleaning capabilities, thereby marking a substantial advancement in the development of antibacterial coatings for medical implants.

engineering, biomedical,materials science, biomaterials,polymer science
Application of Advanced Surface Modification Techniques in Titanium-Based Implants: Latest Strategies for Enhanced Antibacterial Properties and Osseointegration

Pingyun Yuan,Mi Chen,Xiaotong Lu,Hui Yang,Lan Wang,Bai Tian,Wenhao Zhou,Tao Liu,Sen Yu

DOI: https://doi.org/10.1039/d4tb01714e

IF: 7.571

2024-09-13

Journal of Materials Chemistry B

Abstract:Titanium-based implants, renowned for their excellent mechanical properties, corrosion resistance, and biocompatibility, have found widespread application as premier implant materials in the medical field. However, as bioinert materials, they often face challenges such as implant failure caused by bacterial infections and inadequate osseointegration post-implantation. To address these issues, researchers have developed various surface modification techniques to enhance the surface properties and bioactivity of titanium-based implants. This review aims to outline several key surface modification methods for titanium-based implants, including acid etching, sol-gel method, chemical vapor deposition, electrochemical techniques, layer-by-layer self-assembly, and chemical grafting. It briefly covers the advantages, limitations, and potential applications of these technology, granting readers with a comprehensive perspective on the latest advances and trends in surface modification of titanium-based implants.

materials science, biomaterials
Various Antibacterial Strategies Utilizing Titanium Dioxide Nanotubes Prepared via Electrochemical Anodization Biofabrication Method

Wuzhi Wang,Hanpeng Liu,Zilin Guo,Zijun Hu,Kefeng Wang,Yujia Leng,Caideng Yuan,Zhaoyang Li,Xiang Ge

DOI: https://doi.org/10.3390/biomimetics9070408

2024-07-05

Abstract:Currently, titanium and its alloys have emerged as the predominant metallic biomaterials for orthopedic implants. Nonetheless, the relatively high post-operative infection rate (2-5%) exacerbates patient discomfort and imposes significant economic costs on society. Hence, urgent measures are needed to enhance the antibacterial properties of titanium and titanium alloy implants. The titanium dioxide nanotube array (TNTA) is gaining increasing attention due to its topographical and photocatalytic antibacterial properties. Moreover, the pores within TNTA serve as excellent carriers for chemical ion doping and drug loading. The fabrication of TNTA on the surface of titanium and its alloys can be achieved through various methods. Studies have demonstrated that the electrochemical anodization method offers numerous significant advantages, such as simplicity, cost-effectiveness, and controllability. This review presents the development process of the electrochemical anodization method and its applications in synthesizing TNTA. Additionally, this article systematically discusses topographical, chemical, drug delivery, and combined antibacterial strategies. It is widely acknowledged that implants should possess a range of favorable biological characteristics. Clearly, addressing multiple needs with a single antibacterial strategy is challenging. Hence, this review proposes systematic research into combined antibacterial strategies to further mitigate post-operative infection risks and enhance implant success rates in the future.
Antibacterial titanium plate deposited by silver nanoparticles exhibits cell compatibility

Juan Liao,Mo Anchun,Zhimin Zhu,Yuan Quan

DOI: https://doi.org/10.2147/ijn.s9518

2010-05-13

Abstract:Microbial colonization and biofilm formation on the surface of implant devices may cause peri-implantitis and lead to bone loss. The aim of this study was to develop a novel antibacterial titanium implant surface and to test its biological performance. In a previous study, we demonstrated that titanium plates deposited by nanosilver acquired antibacterial activity to Staphylococcus aureus and Escherichia coli. While antibacterial activity is important, biomaterial surfaces should be modified to achieve excellent cell compatibility as well. In the present study, using the MTT assay, fluorescence microscopy, and scanning electron microscopy, we assessed cell viability, cytoskeletal architecture and cell attachment, respectively, on our silver nanoparticle-modified titanium (Ti-nAg) plate. The results demonstrate that the Ti-nAg do not show any cytotoxicity to the human gingival fibroblasts. Our data indicate that Ti-nAg is a novel material with both good antibacterial properties and uncompromised cytocompatibility, which can be used as an implanted biomaterial.
Antibacterial effects and biocompatibility of titanium surfaces with graded silver incorporation in titania nanotubes.

Shenglin Mei,Huaiyu Wang,Wei Wang,Liping Tong,Haobo Pan,Changshun Ruan,Qianli Ma,Mengyuan Liu,Huiling Yang,Liang Zhang,Yicheng Cheng,Yumei Zhang,Lingzhou Zhao,Paul K Chu

DOI: https://doi.org/10.1016/j.biomaterials.2014.02.005

IF: 14

2014-01-01

Biomaterials

Abstract:Most commercial dental implants are made of titanium (Ti) because Ti possesses excellent properties such as osseointegration. However, many types of Ti products still suffer from insufficient antibacterial capability and bacterial infection after surgery remains one of the most common and intractable complications. In this study, a dual process encompassing anodization and silver plasma immersion ion implantation (Ag PIII) is utilized to produce titania nanotubes (TiO₂-NTs) containing Ag at different sites and depths. The concentration and depth of the incorporated Ag can be tailored readily by changing the PIII parameters. The Ag-embedded TiO₂-NTs which retain the nanotubular morphology are capable of sterilizing oral pathogens as opposed to pure Ti plates and pristine TiO₂-NTs. Biological assays indicate that the in vitro and in vivo biocompatibility of the sample plasma-implanted at a lower voltage of 0.5 kV (NT-Ag-0.5) is significantly compromised due to the large amount of surface Ag. On the other hand, the sample implanted at 1 kV (NT-Ag-1.0) exhibits unimpaired effects due to the smaller surface Ag accumulation. Sample NT-Ag-1.0 is further demonstrated to possess sustained antibacterial properties due to the large embedded depth of Ag and the technique and resulting materials have large potential in dental implants.
Dental Implant Nano-Engineering: Advances, Limitations and Future Directions

Yifan Zhang,Karan Gulati,Ze Li,Ping Di,Yan Liu

DOI: https://doi.org/10.3390/nano11102489

IF: 5.3

2021-09-24

Nanomaterials

Abstract:Titanium (Ti) and its alloys offer favorable biocompatibility, mechanical properties and corrosion resistance, which makes them an ideal material choice for dental implants. However, the long-term success of Ti-based dental implants may be challenged due to implant-related infections and inadequate osseointegration. With the development of nanotechnology, nanoscale modifications and the application of nanomaterials have become key areas of focus for research on dental implants. Surface modifications and the use of various coatings, as well as the development of the controlled release of antibiotics or proteins, have improved the osseointegration and soft-tissue integration of dental implants, as well as their antibacterial and immunomodulatory functions. This review introduces recent nano-engineering technologies and materials used in topographical modifications and surface coatings of Ti-based dental implants. These advances are discussed and detailed, including an evaluation of the evidence of their biocompatibility, toxicity, antimicrobial activities and in-vivo performances. The comparison between these attempts at nano-engineering reveals that there are still research gaps that must be addressed towards their clinical translation. For instance, customized three-dimensional printing technology and stimuli-responsive, multi-functional and time-programmable implant surfaces holds great promise to advance this field. Furthermore, long-term in vivo studies under physiological conditions are required to ensure the clinical application of nanomaterial-modified dental implants.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Biofunctional Elements Incorporated Nano/Microstructured Coatings on Titanium Implants with Enhanced Osteogenic and Antibacterial Performance

Na Xu,Jijiang Fu,Lingzhou Zhao,Paul K. Chu,Kaifu Huo

DOI: https://doi.org/10.1002/adhm.202000681

IF: 10

2020-09-02

Advanced Healthcare Materials

Abstract:Bone fracture is prevalent among athletes and senior citizens and may require surgical insertion of bone implants. Titanium (Ti) and its alloys are widely used in orthopedics due to its high corrosion resistance, good biocompatibility, and modulus compatible with natural bone tissues. However, bone repair and regrowth are impeded by the insufficient intrinsic osteogenetic capability of Ti and Ti alloys and potential bacterial infection. The physicochemical properties of the materials and nano/microstructures on the implant surface are crucial for clinical success and loading with biofunctional elements such as Sr, Zn, Cu, Si, and Ag into nano/microstructured TiO2 coating has been demonstrated to enhance bone repair/regeneration and bacterial resistance of Ti implants. In this review, recent advances in biofunctional element‐incorporated nano/microstructured coatings on Ti and Ti alloy implants are described and the prospects and limitations are discussed.

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
Antibacterial Activity of Silver Doped Titanate Nanowires on Ti Implants

Ziqiang Xu,Man Li,Xia Li,Xiangmei Liu,Fei Ma,Shuilin Wu,K. W. K. Yeung,Yong Han,Paul K. Chu

DOI: https://doi.org/10.1021/acsami.6b04161

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:A nanostructured film composed of one-dimensional titanate nanowires (TNWs) was employed as a carrier of Ag nanoparticles and chitosan (CS) to improve the surface antibacterial activity and biocompatibility of titanium implants. A TNWs film was produced on a Ti substrate by an alkali hydrothermal reaction and subsequently doped by Ag nanoparticles through an ultraviolet light chemical reduction. The CS nanofilm was deposited on the Ag nanoparticles through a spin-assisted layer by layer assembly method. The results disclosed that Ag nanoparticles were successfully carried by TNWs and homogeneously distributed on the entire surface. Moreover, a CS nanofilm was also successfully deposited on the Ag nanoparticles. Antibacterial tests showed that the samples modified with a higher initial concentration of AgNO3 solution exhibited better antibacterial activity, and that a CS nanofilm could further improve the antibacterial activity of the TNWs. Cell viability and ALP tests revealed that the release of Ag+ was detrimental for the growth, proliferation, and differentiation of MC3T3, and that CS could lower the negative effects of Ag gradually as the incubation time increased.
Biocompatibility and antibacterial performance of titanium by surface treatment

Jianxue Li,Yimin Zhao

DOI: https://doi.org/10.1007/s11998-009-9221-1

2009-11-06

Journal of Coatings Technology and Research

Abstract:Titanium (Ti) and its alloys are used extensively in implants due to their excellent biocompatibility and mechanical properties. However, Ti-based implant materials have specific complications associated with their applications, such as the loosening of implanted host interface owing to unsatisfactory cell adhesion and the susceptibility of the implants to bacterial infections. Hence, a surface that displays selective biointeractivity, i.e., enhancing beneficial host cell responses but inhibiting pathogenic microbial adhesion, would be highly desirable. This study aims to confer long-lasting antibacterial properties and good biocompatibility on Ti via the microarc oxidation technique. The biocompatibility of the Ti surface was evaluated by cytotoxicity test, and the bacteriostasis rate was evaluated by antibacterial efficacy. The results showed that the implant surface might be nontoxic to cell and its long-lasting antibacterial properties could be significantly improved. These results indicate that such microarc oxidation coatings are expected to have good potential in transcutaneous implant applications.

materials science, coatings & films,chemistry, applied
Antibacterial activities of titanium dioxide (TiO2) nanotube with planar titanium silver (TiAg) to prevent orthopedic implant infection

Lihong Zhang,Zhihui Jin

DOI: https://doi.org/10.1186/s13018-024-04596-0

IF: 2.6

2024-02-18

Journal of Orthopaedic Surgery and Research

Abstract:Orthopedic implant infection has become a common catastrophic complication after various orthopedic implants, which can lead to prolonged use of antibiotics and even surgical failure. The quality of care (QoC) of orthopedic implant infection is very important.

orthopedics
Engineering nanotubular titania with gold nanoparticles for antibiofilm enhancement and soft tissue healing promotion

Xufeng Zheng,Jiao Sun,Wen Li,Biao Dong,Yanyan Song,Wenzhou Xu,Yanmin Zhou,Lin Wang

DOI: https://doi.org/10.1016/j.jelechem.2020.114362

IF: 4.598

2020-08-01

Journal of Electroanalytical Chemistry

Abstract:The success rate of titanium dental implants were challenged from peri-implant infections. However, pure titanium surfaces possess no antibacterial properties and are bio-inert for soft tissue healing delay. In the present study, the anodized titania nanotubes (TiO2-NTs) on Ti substrate were fabricated following by Au nanoparticle (AuNPs) deposition. The AuNPs incorporation into hierarchical TiO2-NTs would not only exhibit photocatalytic activity by visible-light irradiation, but also generate more quantum yield of reactive oxygen species, due to the prevention of electron-hole recombination and the surface plasmon resonance of Au, thus resulting in an enhanced antibacterial effect against multispecies biofilm. Antibacterial efficacy of AuNPs/TiO2-NTs was positively corelated with Au nanoparticle amount in TiO2-NTs samples. Besides, AuNPs decoration would also exert favorable functions on cell attachment, proliferation and migration of fibroblast. Experiments in animal model also indicated a superior soft tissue healing promotion for AuNPs/TiO2-NTs. Therefore, this designed AuNPs/TiO2-NTs is beneficial and applicable to dental implant surfaces to inhibit pathogens, promote soft tissue healing and combat periodontitis.

chemistry, analytical,electrochemistry
Au@Ag@Pt core–shell nanorods regulating Ag release behavior endow titanium antibacterial activity and biocompatibility

Jia-Jun Qiu,Ting-Ting Yang,Yi-Fan Li,Wen-Hao Qian,Xuan-Yong Liu

DOI: https://doi.org/10.1007/s12598-021-01799-w

IF: 6.318

2021-08-19

Rare Metals

Abstract:Although titanium and its alloys are extensively used in orthopedics and dentistry fields, implant failures still happen because of implant-associated infections. Herein, Au@Ag@Pt core–shell nanorods with noble metal combination were fabricated and assembled on medical titanium surface and the antibacterial activity and biocompatibility were investigated. The results showed that antibacterial rates of Ti–Au@Ag@Pt against S. epidermidis and P. aeruginosa were 89.7% and 92.7%, respectively. Besides, Ti–Au@Ag@Pt showed no obvious cell toxicity with MC3T3-E1 cells grew well on the sample surface. It was discovered that the Pt shell layer on Ti–Au@Ag@Pt slowed down the Ag ion release rate which endowed medical titanium surface with both antibacterial activity and good biocompatibility.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Multifunctional Coatings of Titanium Implants Toward Promoting Osseointegration and Preventing Infection: Recent Developments

Xiaoxuan Lu,Zichen Wu,Kehui Xu,Xiaowei Wang,Shuang Wang,Hua Qiu,Xiangyang Li,Jialong Chen

DOI: https://doi.org/10.3389/fbioe.2021.783816

IF: 5.7

2021-12-07

Frontiers in Bioengineering and Biotechnology

Abstract:Titanium and its alloys are dominant material for orthopedic/dental implants due to their stable chemical properties and good biocompatibility. However, aseptic loosening and peri-implant infection remain problems that may lead to implant removal eventually. The ideal orthopedic implant should possess both osteogenic and antibacterial properties and do proper assistance to in situ inflammatory cells for anti-microbe and tissue repair. Recent advances in surface modification have provided various strategies to procure the harmonious relationship between implant and its microenvironment. In this review, we provide an overview of the latest strategies to endow titanium implants with bio-function and anti-infection properties. We state the methods they use to preparing these efficient surfaces and offer further insight into the interaction between these devices and the local biological environment. Finally, we discuss the unmet needs and current challenges in the development of ideal materials for bone implantation.

multidisciplinary sciences

Nano-Modified Titanium Implant Materials: A Way Toward Improved Antibacterial Properties

Zinc- and Strontium- Co-Incorporated Nanorods on Titanium Surfaces with Favorable Material Property, Osteogenesis, and Enhanced Antibacterial Activity.

Fabrication and Biological Evaluation of the Coating Co‐doped Strontium and Zinc Nanoparticles on Porous Pure Titanium Surface by Hydrothermal Method

NanoZnO-modified titanium implants for enhanced anti-bacterial activity, osteogenesis and corrosion resistance

Polymeric Nanoarchitectures on Ti-based Implants for Antibacterial Applications.

Fabrication and evaluation of silver modified micro/nano structured titanium implant

Topography-dependent Antibacterial, Osteogenic and Anti-Aging Properties of Pure Titanium

Multi-scale hybrid modified coatings on titanium implants for non-cytotoxicity and antibacterial properties

Enhancing antibacterial properties of titanium implants through a novel Ag-TiO2-OTS nanocomposite coating: a comprehensive study on resist-killing-disintegrate approach

Application of Advanced Surface Modification Techniques in Titanium-Based Implants: Latest Strategies for Enhanced Antibacterial Properties and Osseointegration

Various Antibacterial Strategies Utilizing Titanium Dioxide Nanotubes Prepared via Electrochemical Anodization Biofabrication Method

Antibacterial titanium plate deposited by silver nanoparticles exhibits cell compatibility

Antibacterial effects and biocompatibility of titanium surfaces with graded silver incorporation in titania nanotubes.

Dental Implant Nano-Engineering: Advances, Limitations and Future Directions

Biofunctional Elements Incorporated Nano/Microstructured Coatings on Titanium Implants with Enhanced Osteogenic and Antibacterial Performance

Antibacterial Activity of Silver Doped Titanate Nanowires on Ti Implants

Biocompatibility and antibacterial performance of titanium by surface treatment

Antibacterial activities of titanium dioxide (TiO2) nanotube with planar titanium silver (TiAg) to prevent orthopedic implant infection

Engineering nanotubular titania with gold nanoparticles for antibiofilm enhancement and soft tissue healing promotion

Au@Ag@Pt core–shell nanorods regulating Ag release behavior endow titanium antibacterial activity and biocompatibility

Multifunctional Coatings of Titanium Implants Toward Promoting Osseointegration and Preventing Infection: Recent Developments