Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

The mechanics of uncemented carbonate sands

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Experimental Investigation of Sand Subjected to High Stress Levels in Wet and Dry Conditions

Mechanical behavior and particle breakage of calcareous sand in triaxial test

Shear Band Between Steel and Carbonate Sand Under Monotonic and Cyclic Loading

Experimental and numerical investigations on the mechanical behavior of sandstone subjected to gas undrained triaxial compression

Experimental study of triaxial shear characteristics of carbonate mixed sand

Particle breakage of uniformly graded carbonate sands in dry/wet condition subjected to compression/shear tests

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Investigation on the mechanical properties of a calcareous sand: the role of the initial fabric

DEM investigation into the small-strain stiffness of bio-cemented soils

Effects of Particle Breakage on the Mechanical Behavior of Calcareous Sand Under Confined Compression Tests

Repetitive Compression Tests on a Carbonate Sand

Fracture of bio-cemented sands

Quantifying the Morphology of Calcareous Sands by Dynamic Image Analysis

Micromechanics of high pressure compaction in granular quartz aggregates

Particle breakage and morphology changes of calcareous sands under one-dimensional compression loading

Assessment of mechanical behavior and failure criteria under varied confining pressures in treated calcareous sand

Long-term behaviour and degradation of calcareous sand under cyclic loading

Cumulative deformations and particle breakage in calcareous sand subjected to drained high-cyclic loading: Experimental investigation