Evaluating a Novel Inorganic Phosphate-Based Adhesive for Bonding Archaeological Pottery: Compatibility and Aging Resistance in Comparison with Epoxy Resins

Lina Xie,Yuhu Li,Yushuai Liu,Wenjing Hu,Shiqiang Fang,Xue-Qiang Chen
DOI: https://doi.org/10.1007/s10904-024-03245-7
IF: 3.518
2024-07-29
Journal of Inorganic and Organometallic Polymers and Materials
Abstract:Adhesives are widely used to join fragments in the preservation and restoration of cultural heritage made of pottery. However, research into the inorganic adhesive for archaeological pottery bonding is scarce and is even non-existent for the comparison study between organic and inorganic adhesives. Nowadays, a novel environmental-friendly inorganic phosphate-based adhesive has been developed. To evaluate the adhesive scientifically and objectively, three epoxy resin adhesives have also been prepared and applied to the fractured specimens, tested and compared in laboratory to check their compatibility and durability in this experimental study. The compatibility characterization results indicate that the bonding strength of inorganic phosphate-based adhesives is closest to that of the pottery matrix. From the perspective of contact angle change, permeability and morphology, the epoxy resins showed a dense structure after curing, which obstructs the breathing channel of the pottery matrix, and therefore the water vapor permeability and water absorption are greatly reduced. Additionally, the cured adhesive specimens also undergo three types of artificially accelerated aging: dry-thermal, hygrothermal and UV irradiation. These adhesives' long-term stability and durability have been monitored and compared in terms of weight change, chromatic variation, bonding strength measurements, microscopic observations and FTIR analysis. After a dry-thermal aging, the inorganic phosphate-based adhesive shows the highest strength retention rate (81%), the lowest weight change rate (-9.106 × 10 − 5 %) and the lowest color variation (ΔE* = 5.46). The findings suggest that the inorganic phosphate-based adhesive may offer advantages over commonly used epoxy resins in terms of physical-chemical compatibility with the pottery substrate and long-lasting resistance to aging. The purpose of this study is to reveal the benefits of using inorganic phosphate-based adhesive to bond shattered pottery through a comparative experiment, hoping to provide useful bonding materials and innovative research ideas for archaeological pottery conservation.
polymer science
What problem does this paper attempt to address?