Abstract:The method of construction and attestation of a numerical model of cold stamping of thin-walled products made of anisotropic metal sheet for the design of technological operations is proposed. The relations of the associated law of plastic flow with the Barlat flow function and isotropic strain hardening are used. The method of design and processing the experiment is proposed for their identification. The forming limit curve is approximated numerically by the Marciniak - Kuczynўski method, and for its identification it is proposed to use a failure test under uniaxial tension and press equipment as an experimental. To do this, a coordinate grid is applied to a flat blank by laser engraving, whose distortions near the zones of strain localization and failure of the vessel give additional points of the forming limit curve. The constants of the Peng - Landel potential are found to describe the elasticity of a polyurethane die under large deformations using tests for free and constrained compression. All tests according to the method were performed for low-carbon sheet steel DC04EK 0.7 mm and SKU-PFL polyurethane. A numerical model of the process in the LS-DYNA package is designed using material models from its library. The calculations according to the model were confirmed by experiment, for which the main deformations were determined by the distorted coordinate grid on the workpiece after each operation at the control points. The calculation of the sequence of stages of stamping, drawing and bulging of the workpiece in the production of the vessel with and without intermediate annealing is performed and the dangerous zones and mechanisms of their formation are determined.

Simulation of metal flow during upsetting of flat profiled billets

On the effect of deformation conditions on the metal flow behavior during upsetting process using finite element simulation DEFORM 3D software

SIMULATION OF MULTI-STAGE COLD FORMING OF A THIN-WALLED VESSEL

Mathematical modeling and simulated analysis of metal flow behavior during the FGC of ESP rolling process

Sheet metal forming simulation in industry

System Analysis of Cold Axial Rotary Forging of Thin-Walled Tube Blanks

Technological simulation of the process of hot forging of two-layer forgings with deep cavities and an inverted cone

Development of a technique for simplified simulation of the thermomechanical processing of large ingots

State-of-the-art of simulation of sheet metal forming

Computer-Simulation Assessment of the Stress–Strain and Kinematic States of a Titanium Nickelide Billet during Screw Rolling

Digital simulation of aluminum alloy slab rolling with low relative reduction

Simulation of the Technological Process of Manufacturing Continuous Metal Products on a Casting and Forging Module with a New Modification

Comprehensive assessment of the production of a pipe billet with a flange by forging at various temperature conditions

Closed Die Forging Preform Shape Design Using Isothermal Surfaces Method

Development of the material database for the VirtRoll computer system dedicated to design of an optimal hot strip rolling technology

Optimization of the Processes of Forming and Welding of Large-Diameter Pipes with the Help of Mathematic Simulation

Numerical Simulation and Experimental Verification of Microstructure Evolution in A 3-Dimensional Hot-Upsetting Process

Phase Field Method for the Assessment of the New-Old Billet Material Interaction during Continuous Extrusion Using COMSOL Multiphysics

Investigation of Rigid Particle Flow Method in Simulating Free Forging Processes

Development of Advanced Technologies for the Production of Innovative Materials with a Submicrocrystalline Structure by Methods of Severe Plastic Deformation

Failure Prediction in Bulk Metal Forming Process