Abstract:An intermetallic alloy based on the Heusler phase—Cu 2 TiAl—has been obtained by self-propagating high-temperature synthesis (SHS) in the Cu–Ti–Al system for the first time. The modes of frontal combustion of the green mixtures and the processes of phase formation during synthesis have been studied. The resulting products have been studied by X-ray analysis (including high-temperature diffractometry with step heating up to 900 K), scanning electron microscopy, and differential thermal analysis (DTA), and some physical properties have been studied. Electrophysical and magnetic measurements are also carried out for the alloy. The results of X-ray analysis and scanning electron microscopy using energy-dispersive analysis (EDA) have shown that the content of the Heusler phase in the synthesized product is at least 82%. The product also contains copper (Cu nine Al 4 ) and titanium (Ti 3 Al 2 ) aluminides. The temperature dependence of the electrical resistivity of the synthesized product is measured for a wide temperature range of 90–1000 K. The resistivity at T = 300 K is 0.3 μm Ωm. The metallic type of conductivity for obtained samples and the anomalous behavior of the temperature curve of electrical resistance in the region of 770–790 K are revealed. Thermal analysis is used to measure the melting point of the synthesized product and reveal additional heat effects at 788, 848, and 1248 K associated with possible phase transitions in the Cu 2 TiAl intermetallic compound. One possible mechanism of these phase transitions is considered in accordance with the phase diagram of the Cu–Ti–Al system. Magnetic measurement results show that intermetallic samples of the compound obtained by the SHS method exhibit weak ferromagnetic properties with residual magnetization of 0.069 A m 2 /kg.

Combustion Peculiarities in the 2Co–Ti–Al System and Properties of the Half-Metallic Ferromagnetic Heusler Alloy Co2TiAl

Structure and Phase Formation in the Ni–Al–Co System during Self-Propagating High-Temperature Synthesis

Combustion behavior and mechanisms of Ti2AlNb compared to an α + β Ti alloy

Synthesis of an Intermetallic Alloy Based on 2Cu–Ti–Al: Structure Analysis and Electrophysical Properties

The Effect of the Cobalt Content and Mechanical Activation on Combustion in the Ni + Al + Co System

Exploring the Thermomagnetic Behavior of Co2TiZ (Z=Al, Si, Ga, Ge, and Sn) Alloys: A Computational Study

EFFECTS OF TiAl ADDITION ON COMBUSTION SYNTHESIS OF Ti_2AlC

Combustion behavior and mechanism of Ti-25V-15Cr compared to Ti-6Al-4V alloy

Combustion Synthesis Reaction Behavior of Cold-Rolled Ni/Al and Ti/Al Multilayers

Exploring the Combustion Mechanism of Single Micron-Sized Aluminum Particles with a Numerical Model

Synthesis and properties of Ti-Al coating by high-frequency induction heated combustion

Study of gasless combustion products of Ti – Si – Al powder mixtures

Microstructure Characteristics after Combustion and Fireproof Mechanism of TiAl-based Alloys

Effect of Combustion Temperature on Combustion Synthesis of Ti3AlC2 and Ti2AlC

Polymorphism of High-Temperature Aluminothermic Synthesis Products in the Ni–Al–Co System

Laser Ignited Burning Behavior and Mechanism of TiAl Alloy

Transport Properties and Structural Phase Transition of the Heusler Alloy Co2TiAl Synthesized by the Melt-Spinning Technique

Combustion Modes of Mixtures of Copper (II) Oxide with Aluminum and Titanium

Kinetics and numerical simulation of self-propagating high-temperature synthesis in Ti–Cr–Al–C systems

Effects of TiAl additions on combustion synthesis of Ti3AlC2 powders

The Effect of the Nickel Content and Mechanical Activation on Combustion in the 5Ti + 3Si + xNi System