Abstract:The ionomer distribution in the catalyst layer (CL) of proton exchange membrane fuel cell (PEMFC) has become a vital research topic, especially under the low Pt loading condition. In the drying process, the ionomers adsorbed on Pt/C particles in the catalyst ink (called adsorbed ionomers) evolve into a thin ionomer coating on catalyst particles, while free ionomers in the catalyst ink randomly deposit to form ionomer bridges (called deposited ionomers). Many studies have reported the structure and regulation of adsorbed ionomers, but little is known about deposited ionomers which are also important for the formation of CL structure. In this work, a two-pronged CL preparation method is innovatively proposed to achieve independent regulation of the deposited ionomer formed by free ionomers in the catalyst ink, and the effects of different deposited ionomer structures on CL microstructure and fuel cell performance are investigated. Furthermore, the two-pronged method is compared with the conventional method to discuss its feasibility in optimizing the CL structure. The results indicate that the characteristics of free ionomer in the catalyst ink will affect the ionomer distribution and pore structure in the CL by controlling the deposited ionomer, thus determining proton conduction and mass transport. The uniform deposited ionomer morphology and short-side-chain (SSC) ionomer structure make the ionomer distribution in the CL uniform, which promotes proton conduction but also results in high mass transport resistance. Compared with the conventional method, the proton conduction resistance of the electrode prepared by the two-pronged method is decreased by 48.3%, the thickness of ionomer film on catalyst particles surface is decreased by about 2 nm, and the power density of the single cell is increased by 40.4% at the current density of 2500 mA cm −2 . These findings provide new insights into the independent regulation of each component in the catalyst ink and the structural optimization of CL.

Fuel cell membrane electrode using polymer superbhort fiber as hydrophobic agent and its preparing method

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Reshaping the Cathodic Catalyst Layer for Anion Exchange Membrane Fuel Cells: from Heterogeneous Catalysis to Homogeneous Catalysis

Fuel cell ordered porous nano-fiber single electrode, membrane electrode and preparation method

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

A High-Performance Membrane Electrode Assembly for Polymer Electrolyte Membrane Fuel Cell with Poly(arylene Ether Sulfone) Nanofibers As Effective Membrane Reinforcements

Preparation and Characterization of Nanofiber Catalyst Layer for Proton Exchange Membrane Fuel Cells

Superhydrophobic Carbon Functionalized by Chemical Grafting of Fluoroalkylsilane Enables an Efficient Microporous Layer for Proton-Exchange Membrane Fuel Cells

The buffer microporous layer improved water management for proton exchange membrane fuel cell at varying humidification

A robust esterified nanofibre electrode for proton exchange membrane fuel cells

Independent regulation of ionomer distribution in catalyst layer for proton exchange membrane fuel cell

Proton-Conducting Polymer-Coated Carbon Nanofiber Mats for Pt-Anodes of High-Temperature Polymer-Electrolyte Membrane Fuel Cell

Electrospinning deposition of poly(acrylic acid): platinum/carbon catalyst ink to enhance polymer electrolyte membrane fuel cell performance

Preparation of a self-humidifying membrane electrode assembly for fuel cell and its performance analysis

Preparation, Performance and Challenges of Catalyst Layer for Proton Exchange Membrane Fuel Cell

Layer-by-Layer Polydimethylsiloxane Modification Using a Two-Nozzle Spray Process for High Durability of the Cathode Catalyst in Proton-Exchange Membrane Fuel Cells

(Invited) Catalyst Layers for Fluorine-Free Hydrocarbon PEMFCs

Control of self-organization of drop-casted Nafion film for improving proton conduction in a polymer-electrolyte-membrane fuel cell to raise its output power density

Study on Control of Polymeric Architecture of Sulfonated Hydrocarbon-Based Polymers for High-Performance Polymer Electrolyte Membranes in Fuel Cell Applications

High flexible ether-free semi-crystalline fuel cell membranes: Molecular-level design, assembly structure and properties