Abstract:As feature size shrinks to 10 nm node and below, cobalt (Co) has been considered as one of the most promising replacements for both diffusion barrier layers as well as the copper conductive layer of interconnects. The cleaning process of Co films after chemical mechanical planarization (CMP) is vital to ensure the interconnection devices' yields and functionalities. This paper presents a study of non-contact megasonic cleaning approach for post-CMP cleaning of Co films. The research focuses on post-CMP megasonic cleaning with and without chem-istry to assess the effect of physical and chemical cleaning of Co films. We evaluate the effect of citric acid on the nanoparticle removal efficiency for Co films assisted with megasonic acoustic streaming. In terms of mechanical megasonic action, the acoustic streaming flow reduces the boundary layer thickness to less than one micron above the surface of the wafer, and that allows a high velocity within less than a micron boundary layer thickness applied the particles on the surface of the wafer. In chemical respect, the nanoparticle removal from Co surfaces can be attributed to the undercutting effect accelerated by complexation at low pH values, whereas the adsorption of citrate ions on Co oxide layers plays a critical role in alkaline regions. Moreover, the effects of megasonic parameters, including cleaning pressure amplitude (power), substrate exposure time, and cleaning tank flow rate on the nanoparticle removal efficiency have been investigated. The results show that the maximum cleaning efficiency of Co films with deionized water only yields 52.7% removal efficiency utilizing 66% power, 87 s cleaning time, and 1.1 GPM (gallons per minute) flow rate. When citric acid is utilized, a cleaning efficiency of similar to 99% or higher can be reached with 100% power, 59 s cleaning time, and 5 mM citric acid at pH 11. This demonstrates that both a cleaning chemistry and a physical cleaning force are both needed to achieve an effective post-CMP cleaning for Co films.

Effect of ultrasound on cobalt removal from PDC in a weak acid electrolyte

Effect of ultrasonic on coating performances of electroplated diamond tools

The novel and facile electrolysis method for removing the cobalt binder phase from large diameter polycrystalline diamond compacts

Effect of ultrasonic on properties of electroplated diamond tools

Study on cobalt removal process of PDC by pressurized chemical precipitation method

Direct copper electrodeposition onto cobalt adhesion layer in alkaline bath

Ultrasound-assisted electrodialytic separation of cobalt from tungsten carbide scrap powder

Electrochemical Corrosion Behavior and Theoretical Simulation of Cobalt in Chemical Mechanical Polishing Process

In Situ Study of Mechanical-Electrochemical Interactions during Cobalt ECMP

The Effect of H2O2 and 2-MT on the Chemical Mechanical Polishing of Cobalt Adhesion Layer in Acid Slurry

Influence of Ultrasonic Irradiation on the Microstructure of Cu/Al2O3, CeO2 Nanocomposite Thin Films During Electrocodeposition

Effect of Ultrasound on the Electrochemical Performance and Corrosion Resistance of the Ti/Sn-Ru-CoO x Electrode

The Role of Carboxylic Acids on Nanoparticle Removal in Post CMP Cleaning Process for Cobalt Interconnects

Ultrasonic Elliptical Vibration Texturing of the Rake Face of Carbide Cutting Tools for Adhesion Reduction

Preparation, wear resistance, and impact toughness of homoepitaxial diamond film deposited on polycrystalline diamond compact by HFCVD method

The Role of Dipotassium Ethylenediaminetetraacetic Acid and Potassium Oleate on Chemical Mechanical Planarization Relevant to Heterogeneous Materials of Cobalt Interconnects

Non-contact Post-CMP megasonic cleaning of cobalt wafers

Recovery of Magnetic Particles from Wastewater Formed through the Treatment of New Polycrystalline Diamond Blanks

Nanomolybdenum disulfide additive improves the tribological behavior of cobalt removal polycrystalline diamond compact

Research on Weakly Alkaline Bulk Slurries Relevant to Chemical Mechanical Polishing for Cobalt Interconnects

The Role of Diethanolamine on Chemical Mechanical Polishing in Alkaline Glycine-Based Slurries for Cobalt Interconnects